[EN] Audi 0AW CVT Automatic Transmission Oil and Filter Replacement

In this video, we replace the transmission oil and filter on an Audi A4 equipped with a 0AW continuous variable automatic transmission using high-quality SWAG lubricants. These lubricants offer optimum friction behaviour - guaranteeing great wear protection in all operating conditions and ensuring that the oil continues to protect the transmission to keep it working efficiently and effectively.
This sophisticated transmission requires regular oil and filter changes to keep the compact link-chain - which transfers force between the two variable conical pulleys - bathed in oil.
The speed at which the output shaft is rotating is synchronised with the driveshaft changes, altering the gear ratio along with it. This leads to seamless gear changes with low internal friction and high efficiency, allowing the engine to operate within its optimal range.

[@mathieutrudeau7510]

This has to be the only proper in depth video on how to do this procedure, thank you so much! I finally feel confident and informed enough to tackle this myself! Also what is the part number for the fill adapter?

[@SWAG_CarParts]

Thank you for watching our video and positive comments. The adapter used in this video was from Laser tools, article number 4988.

[@mickdrake7431]

Thank you, excellent video

[@SWAG_CarParts]

👍

[@kamilpe7596]

Hi
Can you change just oil filter and not loosing oil pressure inside a gearbox ?

[@paulhallett627]

Great video. I have a couple questions, do you check the transmission oil level with the engine still running? And I assume you let the oil gently flow until it stops, and then remove the adapter and replace the drain plug? Thanks.

[@SWAG_CarParts]

Thank you for watching our video and kind comments. What you have described is the process as followed in the video.

[@derargentinier8879]

exelente !!! muchas gracias

[@SWAG_CarParts]

👍

[@derargentinier8879]

I buy oil peak 🇺🇸 is red color …. Are ok ? Or no ?

[@YeiDCalle]

@@derargentinier8879of course it is , Redline CVT SLIP best oil for CVT by far . 👍👍

[@mustaphaessahihi1762]

0AW OIL CAPACITY IS 6 LITERS OF CVT OIL AND FOLLOW THE VIDEO TO CHECK THE LEVEL BY LETTING THE TCM REACH THE OPERATING TEMPERATURES

[@YeiDCalle]

7 Liters you Zombie 🧟

[@ed2s]

Why not pour the oil in the filter hole ?

[@BEEF-EATING-BEAR]

You can just put in what you take out

[@mohamedfethi2408]

Can you help me please, i have an audi a5 b8 with the same transmission, i have a problem no reverse, can you tell me how i fix the problem

[@user-vx6zp4qm3k]

I have same problem my reverse stop working works in drive and all and was working before. Did you find out the problem?

[@lappavideoita141]

​@@user-vx6zp4qm3k TCM broken, maybe

[@SibusisoJohan-bu4lr]

Which name of oil

[@SWAG_CarParts]

Thank you for watching our video. Please head over to our on-line parts catalogue www. partsfinder.bilsteingroup.com where you will find all our products including technical bulletins and full product details including safety data sheets.

[@scott2735]

What size thread is the filler tool.

[@SWAG_CarParts]

Thank you for watching our video. There are no special tools required to replace the filter, or are you asking about the transmission oil filler tool adaptor?

[@scott2735]

@SWAG1954 Yes, the adapter that screws into the gearbox to allow you to pump the fluid back into the gearbox

[@SWAG_CarParts]

@@scott2735 The thread size is M22 x 1.5 x 10mm. We used Laser adaptor 4988 in this video with the filler tool 4792.

[@yassineaberchane7479]

Price ?

[@davidfernandez2815]

eBay for less than 50