Interceptor 650. Yet another rectifier/regulator re-location

Sdílet
Vložit
  • čas přidán 22. 05. 2024
  • Email: jamesengland1000@gmail.com

Komentáře • 15

  • @skymningforelsket1302
    @skymningforelsket1302 Před 23 dny +1

    If it keeps frying despite being adequately ventilated, why not fit a Nippon Denso one on there. Something from Yamaha or Suzuki. I hear the ones on the SV650 last for a really long time. I think better quality ones have better internal insulation material that doesn't break down from heat.

    • @internetpolification
      @internetpolification  Před 23 dny +1

      They fry due to the OEM location. No reports of burnout on re-located OEM RR units so far.

    • @skymningforelsket1302
      @skymningforelsket1302 Před 22 dny

      @@internetpolification Looks like the new Triumph 400 is putting it under the seat. These things really make you wonder, don't it?

  • @nrich5127
    @nrich5127 Před 23 dny +2

    Is there a wiring cable with the correct connectors that is available for be purchased ?

    • @lenhartley8904
      @lenhartley8904 Před 23 dny

      I recieved mine from James on this channel who makes them. His email is in the description.

    • @internetpolification
      @internetpolification  Před 23 dny

      Yes. I make them and send all over the world. Plug and play with the correct block connectors. My email address is jamesengland1000@gmail.com. Drop me a line for details

    • @nrich5127
      @nrich5127 Před 23 dny +1

      @@internetpolification Thank you for your prompt reply.

    • @internetpolification
      @internetpolification  Před 23 dny

      You’re welcome!

  • @srinivaskirthy
    @srinivaskirthy Před 23 dny

    Hi James, would like to know more on the steering damper mod on that bike - apt for high speed stability. Can you or your friend share more details on that please? If you find it worth your time, a video on that perhaps? Thanks.

    • @internetpolification
      @internetpolification  Před 23 dny

      Hi. I didn’t do the mod re steering damper, I’m afraid! Perhaps a subscriber can advise? Do you really think this is necessary for this bike?

    • @srinivaskirthy
      @srinivaskirthy Před 23 dny

      @@internetpolification Well both the twins - Interceptor and the GT have had their share of tank slappers in the past - particularly the 2019-2020 models with the Pirelli Phantom Sportscomp (Brazil made) stock tires. Many users have tried wheel truing, retightening steering head bearings, adjusting tire pressure, changing tires, etc. - but the general consensus is that the tires were the culprit, some manufacturing defect. Regardless, the 24 degree rake on the Interceptor is on the sportier side (towards sharper handling), so I was thinking along the lines of a damper. Wouldn't hurt to have a helping hand at 140+ kmph.

    • @internetpolification
      @internetpolification  Před 23 dny

      I suppose it depends on the road surface too? I regularly ride at 80mph here in the U.K. but have never had any tank-slapping or need for a damper, I must say.

    • @srinivaskirthy
      @srinivaskirthy Před 23 dny

      @@internetpolification Right, I haven't faced front wobble as well. Running Ceat at the front, Pirelli at the rear. Sudden road surface bumps + high speed + some steering input make it likely I guess. I haven't been that adventurous, speed up on smooth tarmac, exercise care on bumpy roads.

  • @martythompson6509
    @martythompson6509 Před 22 dny

    Change the stator to a MOSFET.

    • @internetpolification
      @internetpolification  Před 22 dny

      You mean the RR unit? I suspect that even a mosfet RR would be unhappy in the OEM location….. the mosfet RR’s I’ve seen all have thicker gauge wire which means OEM block connectors can’t be used without cutting the wiring harness in order to use different blocks.