Magnetic Switch Motor
Vložit
- čas přidán 30. 08. 2020
- With the world’s current volatility and market instability I highly recommend you get some storable food for yourself and your family. It never hurts to be prepared for an emergency before it comes. I get mine from the largest and most trusted source in the market. Click the link below and take a look for yourself.
mypatriotsupply.com/?rfsn=611...
This video contains information on how my magnetic switch motor works and how it’s constructed.
Some of the specifics are as follows:
I used four N52 neodymium magnets in this video. They are .05 x 1 inch in size. I stacked them to form two 1 x 1-inch cylinders.
The 2 metal bars I used in the rotor are 6 x 1 inch.
The shielding material is from CO-NETIC. There are three sheets, which are each 8 x 5 inches. The holes are 1-inch diameter, with a 3-inch space between them, centered in the metal sheets.
This design would have a much better chance of working consistently with square magnets with at least 400 lbs of magnetic hold force, low friction bearings, and a leverage bar triggering the switching of the shielding slider.
The Key to building a Magnetic Motor:
• The Key to building a ... - Věda a technologie
Perfect for me , i will start working again at this project🙂. Thank you very much. I like you because you do not do this for money . I worked at this for 3 years non-stop and not for money but for free energy for everyone. It is very dangerous to risk doing something like this but i am ready to take the risk for the good of the humanity and i think i can do this . I am so close . Thank you again for the video and sorry for my bad english
been a fan of you channel for a while.. def good to have an optimist mindset in new idea or old concepts.. ive constructed a concept that remove all issues (known) so far.. needing more resources to build it without the extra questions and more professionalism..
Thank you for sharing your work!
Tysm your videos are really the only videos that I trust the info.
I'm also building my own magnetic system, but I think I will be sad when it works because this is my only passion in life.
But because of you I understand how the system work that I made and I could solve alot of the problems.
The best advice I think was to start with a linear assembly before you make a rotary system.
I watch your videos every day, I know there are not that many to watch but the information brings inspiration.
Tysm
how is your experiment going good sir? Id love to hear feedback!
That magnetic switch is awesome!
I love ❤️ your patience about making magnetic moter
I have been working on this for over 50 years, ever since I was in college. I have even made the curved magnets in Howard Johnson's model. I have tried a lot of designs. Right now I am in my 70's and want to give you what I have found. The best I have found is the simplest. We are very close to each other. Now to demonstrate my closest model I can describe it simply. Take a model train. I made mine with my 3d printer. I wanted to make sure I had no eddy currents. I used fidget spinner bearings too. :-) Place a long magnet cross-ways on the train car. The magnet is orientated north and south on the largest flat sides. It is placed at a 45 degree angle. Then you have another flat magnet placed on the bottom table. The table magnet will attract the car magnet till it is very close, then the resistance is a very small but strong place. Once past the resistance, the table magnet pushes very hard. You get a pull, then a push. Now, I was using a combination of co-netics shielding, and a torrent coil to reduce resistance. The torrent coil helped short out the magnet and the co-netics helped block the force fields. The torrent coil is of the lowest power I can use, and is turned on very quickly. I want to get all the push I can get from the magnets. I am having a little issue with the spacing. I want to have the magnets which pass each other as close as possible, but the torrent coil was getting in the way. I had ran some math and the best angle is 45 degrees. I hit myself in the forehead, because that was obvious. No need for the math. I was running all sorts of math configurations 30 years ago when visual basic first came out. I was a main frame programmer for IBM. I got a partner who lives in Melbourne Australia. We have been swapping information for the last 30 years. I was working on my latest model when my 3d printer broke. The filament pushed the guide into the heating element. I was using 4 inch by 1 inch neo magnets. Just got to be careful, they can snap your fingers. The co-netics get close, so the torrent coil should push it over the hump. The power produced should way more than be enough to turn a generator and run the torrent coil. Now, I have not converted this to circular motion yet. Last time I did, the angles were off, and I had eddy current issues. This is why I wanted to get a couple working first, then go for the circular motion. Right now, I need to get my 3d printer working, and find the proper torrent coil with the current to accomplish what the math tells me will occur. I have been told this is perpetual motion, but I do not agree. I think this is just a way to use the magnets properly. Now I did find one thing, the constant pushing and pulling on the magnets wore them out. (lost their magnetism) I just do not know how fast. I still think this could work for a while to be commercial. But aren't we all optimists. :-) Just be careful, these magnets bite fingers.
Have you shot any footage of what you are describing here? I would love to see the physical results of that track.
Brilliant. Thank you sir.
Thank you.
@@Motionmagnetics Hello! A friend of mine who had a free energy generator showed me a diagram of how to make a magnetic switch where the switching cost will be 1 W, and the gravity will be 200 kg, which must be accumulated in the flywheel! it all works, switching by electrical impulse
Those fidget spinners are totally inspired, what a great idea. Thanks for your openness, thats not easy!
expandiu minha mente, obrigado pela idéia e o conceito...
vou aplicar em meus estudos e protótipos...
chegaremos lá....
Obrigado. Eu agradeço.
About 12 years ago I used to fallow the Peswiki page ,whitch has been dismantled..for unknown reasons... it was a sight that had up todate of all technologies . There was a guy who had a very similar device like yours. Different but doing the same thing.. I contacted him .He said it was working ...I have been working on my own design for years now.. Nice work ..
Dude this so fucking amazing. I feel like even with a small amount of electrical energy providing the sliding motion of the slide the rotating part may produce more, and I think would produce more energy than it would require to move the slide back and forth. Especially when on a larger scale because the amount of energy to move the slide wouldn't scale the same as the energy out put of the rotation. In my mind you just made free energy my guy. I really hope you're ok haven't posted in awhile. I want to work with you and help fund your research.
Exactly my thought
Same as me, I have plenty good ideas, but dont have working place :D
Thanks. You may be right. I've been active lately with new content and am currently 3D printing parts for a new project I've been working on for a couple of weeks. Should have the video up soon.
Hi, I love what you have done. This is a way I have not ever considered because I had trouble with the co-netics. I have been interested with magnetics since high school, which was a while ago. A long while ago. I have been playing with these designs for a lot of years. A lot of years. Before 3d printers I was making the frames in plexiglass. Before that I tried Aluminum. This was before I experienced the eddy currents. I was able to make a motor which was more of a clutch. It had 10 lbs of resistance one way with 1/2 lbs of resistance the other. I am very excited on my current design (but I have been very excited on the last 50 too) . In college I found no one knew too much about magnetism. So I experimented. I have smashed fingers many times, and then in a Popular Mechanics (I think) Howard Johnson patented a motor. My main problem is that my profession was computers. Once my son was playing with some less powerful magnets and yes placed these on a laptop. My desk has 5 monitors with 7 computers. They are not all PC's. I had even worked with a professor in Ukraine, and I had some special curved magnets made for me. I was going to try and make the motor Howard Johnson drawn up. These are in the crescent moon shape. I have never worked with these, mainly because of all the computers. Now where you are using fidget spinners and 3d the carriages, I used the LGB (Large Trains) to experiment. I still never got to use the curved magnets. These curved magnets are about 10 inches by 4 inches. I think I got 5 of these. I would give these to you if you are interested. You have been the first magnetics person who was not touched in the head. I include myself as touched in the head. I have always known since I made my "clutch" it has a difference of 9 1/2 pounds. If I could have shaved that 1/2 lbs off, then I would have had a true magnet motor. I am almost 70 years old, I have a degree in Quantum Physics. (I failed English many times). This all said, would you be interested in having these magnets for free. They cost a bundle, but I do not know how much longer I am going to be around, and you seem to be the perfect to give these to. Just keep posting these fun videos. I have never posted anything, because I never got anything working as a motor. Always close, but quit mostly because I did not need to loose any more computers. I have been told many times this is perpetual motion, I never believed it. I just believe it was a force we never explored to find how to control its powers. Let me know if you are interested. Thanks
any updates on your design sir? I'd love to hear discovery!
🦋 I as well have gotten up in years, so time is no longer on my side either. I explored the idea of using curved magnetic fields, but simply switched that out for a curved magnetic 🧲 runway plate that provided equal if not better results.
I then realized that no matter the shape of the magnet, that as long as Newton’s third law of motion was always in play, a magnetic motor wasn’t possible.
Then I remembered a simple demonstration in Highschool Science where the lid of a tin can would shun a magnetic field. However, simply shunning the field was exactly half of the equation to overcoming Newton’s third law of motion. The second half of the equation was a light bulb moment.
Since the attraction from one magnet to another magnet is far greater than that of the attraction of a magnet to steel, capitalizing on the difference between these two attractions would become the magic bullet for overcoming Newton’s third law of motion to creating continuous motion for a magnetic motor.
Ten minutes later, I had created a simple magnetic shielding process that shunned 99% of the magnetic field. While at the exact same time a portion of that magnetic field is left wide open where I used my shielding process to focus the field like that of the barrel of a gun. Now I had stator that would easily overcome Newton’s third law of motion that worked prefect. No Longer was the equal and opposite force an issue any longer. I know had an imbalance system.
Lastly, I came to realize by putting a layer of paper or art board between each thin layer of metal shielding dramatically increase the performance.
Soon afterwards I publish my findings on CZcams revealing that you can indeed overcome Newton’s third law of motion. In about two months my video had received over ten million views. That’s when CZcams took the video down, saying that my video violated CZcams’s community guideline.
Figuring this was just some simple mistake I then posted my latest new findings in a new video. In just two weeks, CZcams also took that video down stating it was in violation of community guidelines. Now I knew this was no accident rather I was being targeted. Just three days later I tried to post a new video to my channel only to discover CZcams had taken down the entire channel.
So I started a second channel. This time trying to be more stealthy about what and how I made my videos. That still did not help. Within a month that channel as well was taken down by CZcams.
If I had not known before, I knew now that my research was being targeted in the name of suppression of information. Since then I have avoided putting up any such video that proves a magnetic motor is indeed a reality. Rather I reposted all the old videos that never showed anything working, only videos that showed the viewer what you need to do to get it to work. CZcams never took down that third channel of mine. At least not yet anyway.
I also published a video called, magnetic shielding the holy grail. Soon after that video went live somebody else made a video trying to make me look like a fool for my claim. The way they demonstrated the magnetic shielding technique not working was not the same technique shown in my video. Obviously this was an attempt at disinformation, to lead people away from my solution to overcoming Newton’s third law of motion.
Sometime later I found a couple of other channels who successfully replicate my findings. Why motion Magnetics here has never bothered to implement some or all my research into his is mind-boggling, as he has watched my videos. Had he done so, he would now have a working magnetic motor, rather than giving up and walking away from his CZcams channel.
His magnetic switch has a flaw in it which is easy to see. At least for me anyway. The shielding that he is using also has a magnetic attraction which creates friction. Where as my system is not only friction free, but there are no moving parts other than the armature.
Motion Magnetics armature switching system is very limited because it’s very mechanical and makes a horrific amount of noise and extreme vibration before it would ever obtain any real speed. Where is my set up is 100% quiet, with zero vibration.
No time to proof read, so I hope all of this makes sense to the reader.
Hope you’re still around and doing well during this plandemic.
Hey man can you post your work on you tube or any other platform that you may have am very interested in what you said in your message
@@JustChillingOut sir. Would you share your videos with me. I will share my email. Thank you. IhAre that your work fell on deaf ears. Any advance I would make in your discovery. I would always give you credit. So that your discovery may live on.
Good ideas for making the world a better place.
🧲 If I may… replacing the shielding plate with the two holes in it with a cut sheet to size of a piece of PVC, would dramatically reduce the Coggin effect you are experiencing.
Simply replace the location of those two holes with button magnets of the same size, making sure they are in repulsion mode. Rather than time the movement of the two staters to get out of the way just as the armature magnet is leaving, you would do the opposite.
Now you would have each stator magnet come into position just as each armature magnet was 56% to 66% past the center of the stator magnet. Since we would now be working in repulsion mode, this will cause a huge forward motion kick to the armature magnets.
In retrospect, your design here will cause an enormous amount of vibration. Anytime we create something that has to start and then come to a complete stop, and then reverse direction, only to repeat this process over and again always leads to vibration. Whereas continuous motion in one direction is what is truly needed.
My one way stators are basically a passive magnetic switch that Illuminates the need for Mechanical switches.
Just so you know, this challenge of solely using magnets has already been solved. At this stage my goal is to provide a design that generates immense torque.
I see you messaged me , and I have yet to catch up on everything, but I have been away battling health issues on the home front with the wife, along with Christmas.
Good to know you made it through the plandemic. Turns out the cure for it was super simple to the tune of 35,000 mg of vitamin C. Medically proven to work 98% of the time except on those who are too far gone which is the last 2%. This simple solution that is now being used throughout the world is still banned aon most major platforms to talk about otherwise you’ll get flagged or possibly lose your account especially if you use the word cure in the same sentence.
Thanks for the input. Always good to hear your thoughts and suggestions.
@@Motionmagnetics I must not get it, and I haven't studied your design, just watched the video quickly... but why are you using magnetically effected shielding material (steel) instead of aluminum or another non-magnetic metal to shield it? The energy used to move the shield over the magnets seems like it would be a drain on the system? I'll have to watch the video many more times. You could also make the stationary magnets electro-magnets and have them computer switched, I'm sure you know this. I think the energy to magnetize them could be powered by the motion created?
@@Motionmagnetics Today it can be done with arduino or rasbery pi. czcams.com/video/J2bPDDWqSvM/video.html
Yep, someone doing it with arduino: czcams.com/video/WkcVtNjKY7k/video.html
@@Motionmagnetics czcams.com/video/7xYdaipXXwU/video.html this kid did it, he says that the sticky point is the just the last 2 magnets... so if those were either removable (like in your design covered with a shield) or just able to be turned off by a computer, maybe that would work? i can't see that the unsticking electromagnet takes more energy than is produced through the rest of the turn, but I don't know the values... maybe you could tell me? Really I think you have your motor with the magnets you showed where you just twist the turn and the magnet is turned off, that's all you need and that can be powered by solar making it virtually free... I'm guessing the guys in washing tin cans and their men with weapons already has been doing this for a LONG time...
Great.! Thanks for sharing
I love your videos and I appreciate all you do very much. I admire your creativeness and your ability to apply your ideas into working models. Thank you for sharing all you do with the world.
The work required to "switch on" the shielding will always exceed the work done by the field moving the magnets. The strength of the field drops inverse squared with distance. So the distance required to fit adequate shielding to block the field will diminish the force to less than the force required to move the shield into position. and leverage does not change the work done. It just allows for a smaller force over a greater distance or for a longer time. I was obsessed with this idea for quite some time but throughout all my experiments, eventually came to the conclusion that it wasn't able to overcome the laws of conservation.
Great Work!
With the iron bars spinning pass the magnets I’m curious to see if they would become magnetized also. Thanks for sharing
I would recommend using square (ore even rectangular) magnets so that not only the area of the uncovered magnet and covered magnet are the same, but that the magnetic forces are the same. I have done similar experiments and discovered a WORLD of difference when I went to square magnets. Look at the drawing at 5:19 in your video, and the difference a square or rectangular magnet would make.
I appreciate your process. I work similarly. Keep working on this. There is no free energy, but working on design increases your skill of design and production. Great life skills. I am working on a few things myself.
There is free energy, we just haven't cracked it yet.
Very nice!
The world is a better place with bright souls with great courage like you! Thank you
you are lost if you really believe
Mantap,,mamper di cancel otak Atek motok.motor lestrek ngecas sendiri.gk usah ngecas di rumah.
Can you use a cam or linkage or gear arrangement to move the shield in front or of the static magnet, or move the attracting magnet out of the way once the rotor magnet/steel bar is passing? I don't think the static arrangements will work, but a dynamic mechanical solution looks possible.
You can get magnetic shielding materials such as Mu Metal. Some nickel based alloys are good too. Iron or ferrite that hasn't been magnetised might work. I once opened up a hard drive and inside there was a powerful neodymium magnet which had a shield bonded to one side. It was almost like a monopole; the shield was so good that there was almost no magnetism compared to the other side. I think the shield was made from stainless steel, but I'm not sure which grade.
To those saying it's impossible and breaks thermodynamics: It's not free energy, because manufacturing magnets is energy intensive, and their force diminishes over time. Think of a magnet as a battery or capacitor that instead of storing charge, stores magnetism.
Your contribution is very much appreciated
First ,Thank you . Is there a way to have enough torque to run an alternator for example? and es'que it would work by making it longer with several rodes in the spiral position?
in this one i got the qeustion is it hard to turn the leaver from the magnetic switch. it´s mayby becoming a part of my project. to catch up the bal at the top of the inclined v magnet rail and let it go. but it need to be almost friction less or easy to do.
I am a old mechanical engineer and have always thought that magnetic attraction forces might be harnessed using levitation ,of course, if you read the 200 year old Earnshaw theorem and understand it, you will come back to the same seemingly impossible problem of intermittently blocking or turning off a permanent magnets field.
I have seen designs that rather than using a magnet and shielding it when required, they use an electronic coil that produces a magnetic field, then all you so is somehow switch that magnetic field at the precise time and this would solve the problem, and the coils could eventually be powered by the generated electricity of the generator
that is a great idea. could we have a follow up video ?
Can you shield the "gate" in a v gate motor? In a harddrive, the magnets are mounted to a metal frame, is that magnet shielded?
Thank you for sharing
Would a spinning disc, rather than a rocking table, perhaps require less energy to overcome inertia on each cycle?
oooh that looks useful indeedy!!!
Thank you for sharing.
Though you might want to see something that works without batteries: czcams.com/play/PLcttXCrYoAgOH6cemLCCVsBHGibCxC4g_.html
Thank you very much.
You're welcome. Thank you for watching.
Also you are correct that wind turbine low RPM magnetic Generators are the best candidates for this, as i just ordered an 8KW one that i am going to power with one of these inventions
Brings back memories of Steorn. I am pretty sure what they’ve got worked. They probably either shut them up or paid them off.
How about using 4,6,8,... arms so the offset between is smaller and higher force and speed can be achieved with smaller magnets?
Uplifting and a cool approach. You rock.
Have you thought of using Mu metal? We use it to block magnetic fields around compasses it would lighten the slider. You can buy it from an aircraft spruce and specialty. Great project.
Its so funny how so many people think this is possible but there is no free lunch, the energy needed to move the shield in place is always equal or greater than the energy the magnet gives to the rotor, magnets are just like springs.
What is the metal used for magnatic flux shielding
Gods gonna bless you man
extremely smart!
In 1983 I met and married into a wonderful family. My new father-in-law was a college professor. I showed him my idea (nearly identical to yours with angled magnets and axial in nature) and he really ripped it as foolish and I dropped it. WHAT AN IDIOT I was. Don't listen to anybody giving you crap on this idea. Back then we did not have 3d printing, CAD, overnight shipping, etc. You can do this!. Come to think of it- I actually can do this since I never threw out my original prototypes. They are coathangers and shelf brackets, OMG they are ugly. Thanks for sharing!!
Awesome!
You can man 👍😁
Have you finished a functional prototype of a motor with magnetic shielding ???
What kind of shielding material do you use, is there any in specific? Wikipedia gives a list (permeability, electromagnetism) and much higher in the list above pure iron I find Mu Metal and Permalloy (80% nickel alloys) among commercially avaible alloys...
Haven't seen anything from you in a while. Everything alright?
Imagine him figured out how to do it, now the government has him in some room out in no where making magnetic generators for him lol.
But yea, tbh thought the same thing
I had been following this guy for few years and feel the same why kinda odd how he seemed to be close the nothing for a year
He got sucked into the magnetic multiverse
We need to find this guy!
Hi, can you explain to me why the shielding plate is stopped in 00:07-00:12 when the rotor is rotating? You are telling that shielding plate in move is the key. Thanks :)
I dont think he was trying to show it running at 00:07-00:12
Perhaps, it was to demonstrate the friction of the main shaft spinning.
Awesome as usual. Keep up the good work mate.
What about a wheel on one end of the shaft, that spins a disc like magnetic lock? I had this same idea a while back, but yours is much better.
Your channel is amazing. please never stop
With all due respect may I suggest:
I think you have already consider thar you have 2 magnets at the left and the right of the ball, and below you have gravity, so you have kind of 3 magnetic forces around (I think you have already considered gravity long time ago)
Have you tried putting magnets not at the sides but at the top and the bottom of the track? (Maybe you can also use a sylicon transparent hose or other materials for the track to reduce friction.
(I can be totally wrong but hope my suggestion somehow ;) )
I think you need more energy to switch it on and off than just what the rotor can produce the energy. So try to add flyweels big enough on your rotor to add more energy to your rotor..
Input VS output will always have the same outcome, adding a flywheel will just delay that.
Okay, couple of things you did wrong. Number one you're working on attractive Force rather than repelling force. Number two just build it like a standard engine. You have what I call the mag valves at the top of the engine working like the valves on a standard engine. The Piston will be made of a high-powered neodymium magnet, with the mag switch at the top of the cylinder. This will have a cam that rotates the mag switch on and off. Once the mag switch is turned on to its proper polarity it shoves the Piston down due to repelling forces. Then you really don't have to worry about modifying anything else about the engine, it'll function and run just like a regular engine would. Make it happen captain.
How much energy does the switch use?
If too much then game over.
Thank you,
Is energy spent in moving the iron sheet away from the magent less than the energy needed to rotate the motor ?
No. That's why I mentioned some needed alterations to the design. It won't work properly the way I have it set up in the video.
good work and sweet idea but the shield is closer than the drive. would that make it not work regardless of scale or friction?
magnet is strong close up by much. I made many motors in many years but nothing like seen on youtube.
Great, thanks for sharing! You could show the working assembly on April Fool's Day. So no one would consider it as real - except your loyal followers. There so much fake overunity devices out there. Would there anything "suspicious" about your device? Back in about 2005, when Mike Brady (Perendev Motor) was in Germany, there were no way to get a look at his device. I've gotten him on the phone but there was just an announcement for further official presentation which unfortunately never happened. Back then my English was very poor and from this time on I was curious about the possibility to have a look at a self sustaining magnetic rotator. I remembered because you showed the Perendev video at 2:00. All the best :-)!
If I'm hearing you correctly, what you're basically saying is you made a mechanical pulse width modulating motor.
I see you are working from mechanical switching, I would like to remind you there would be more limitations on the speed of switching possible vs electronically switching, and suggest you work for more torque vs RPM to help eliminate mechanical wear and noise generated from mechanical switching.
I would have went with a cam or swash plate for the switching, but it's builder's choice.
@@easycheese6409 how are your designs going guys?
when i was in highschool i thought of how to huild one and ever since i have had idea of what where and how and so many different possibilities like if you made one that crates power or one that runs an air pump then feeding itself then powering it's own supply then doing batteries or an air pressure tank. the possibilities are endless and world changing if it wasn't made illigal to make unregulated power. EDIT: making use of a weighted flywheel on the side for added motion would help it's to spin an alternator if i am not mistaken
The best thing about your videos is that you record them first and add commentary later.
It makes them more professional. 👍
what is the shielding material
Literally have been experimenting with this albeit slightly different.
Seems like you could accomplish the same goal with less expenditure by replacing the moving shield with a pulsing electromagnet/magnets. That pulse at the right time and push/pull the rotor through the flux of the magnets. Great work as always though
He works solely with magnets...
Steve-o yeah I get that, but it still seems like it would be 10,000% more efficient. The power required could literally be produced by the stator and have tons left over.
Any electrician could do that. And there's nothing wrong with it, but that's not my overall goal.
Motionmagnetics yeah I get I’m leapfrogging the goal of make a machine run by nothing but Magnet part.
@@Motionmagnetics what would be your overall goal? free energy
thanks for sharing, im gonna try for making a led lamp generator with a stepper, of course for my workshop, take your like and subscribe from Venezuela, you gave a great idea for my 3DP that I was looking for a year ago
And maybe use a flywheel on the shaft to make the energy moments run smoothly.
you can add small opposite magnets to each end of the slider and the posts so it doesn't bang 😀
Very cool man! You have done what I've been preaching for the last two years. Thankyou for sharing. I subd
greath idea wat about a dynamo and this motor
what would this type of magnet motor would this be classified as?
This is absolutely brilliant!
Amigo cuando lo logre es a usted el que le voy a decir primero porque usted tambien a buscado por mucho tiempo 👍
you could use an electro magnetic to replace the shielded box magnets and slider ,simply reverse the polarity of the electromagnet at the right time
that using a lot of energy
I look forward to seeing it work. The closest I've seen someone come to a working one was a tabletop display model in a sealed case.
Thank you very much for what you have shared!!!! Have you considered sharing the 3D models either via direct donation or as a perk via Patreon or something?
You're welcome. This is more of a test model. If I had one with all the kinks worked out I'd consider it.
@@Motionmagnetics :( leaving the poor gang behind
@@panzerofthelake4460 yeah please share it. That too is being open and collaborating! You say in the video you want to better humanity and collaborate.
@@Motionmagnetics Then we could share Your projects
try using a ring magnet with a rotating iron shield in place of your hole shield, I used it in my lenzless generator with success, there is no drag when you rotate an iron piece parallel to the surface of a magnet, stay away from attractive elements in designing a magnet motor, it will always fail, use only repulsive effects to cause rotation.
You know even a 10 second video saying you are ok would be good to know since its has been a while.
Everyone likes to make myth busting (or fake) vids on perpetual magnetic motors. But, I still believe there's a way to line up magnets in the rite order, that you can make it continue to work, without a power source. What about those lock switching magnets? what if there's a way to make levers/arms, and maybe counter weights that continue to switch the magnet on and off, therefor it continues on it's own.
God bless you 😉
i've spent a lot of time looking into PMMs. yesterday i prayed and asked God if i was wasting my time. then i watched the beginning of the documentary "A Machine To Die For" which believe it or not i had never seen. in the first 10 min i heard, "you are in danger of becoming obsessed by perpetual motion and spending the rest of your life divorced from your spouse and married to a machine." i seriously doubt that was a coincidence
If anyone rebuilds this PLEASE upload a video (without monitaricization) of how long it spins
I'm kinda too suspicious but concidering the guy is a genius, this should kinda work
Lol, he won't show a "working" model. Only claim it "should" work. If he does, he won't be alive for long.
@@ronaldd2154 lmao U believe that they follow people who build working "free energy" aka overunity devices? Damn, it's 21st century
nobody's gonna kill you for this
@@panzerofthelake4460 You have no idea...... Overunity means end of the slave trade which means hundreds of thousands, if not millions of vultures, leeches, parasites won't have power/control over you anymore in a very significant way. You really think they'd let you get away with destroying their way of life and agendas?! They rely of you. The last thing they want is freedom/choice. Overunity if it ever does become mainstream will only cause a global war bigger than anything ever before. How many businesses would shut down if people decided "ahhh fuk it, i don't have to go to work today, or tommorow, or ever if I dont want to"
The only reason why they are transitioning from petro-dollar to renewable "green, solar, wind, healthy" bs propaganda (yes its cleaner) but is so you pay AGAIN for it, and with everything being converted from analogue to digital /Electric means they can track you anywhere, anyplace, anytime. We're all just animals in a giant cage, zoo, and its a matter of time before "Quantum" tatoo / micro chipping people will become the norm. Like Norton/mcafee antivirus for computer, so will it be for humans, your taxes will pay for a subscription for Mandatory vaccines, and optional for others (to make it look like you have a choice). All just illusion. Look up Edward snowden and surveillance, look up how your data right now is being tracked, everything you type, everything you view, everything you DO on your phone. People are business.
Middle-class eventually won't exist, just rich and poor. With robotics and renewables comming in, millions of basic jobs will be wiped out for us, even though it will also create jobs (they will require higher levels of education and overall intelligence). Elon musk is working on his neura link in an attempt to stick a digital interface to the human brain.... Now that will give you an advantage over other "normal" people when looking for a job in the future, but you certainly won't be human anymore.
This system is not under true democracy, but hi-jacked by evil. Globalist cabal networks rule it. They are trying to monopolize anything and everything including nature itself. It means they are armed with weapons and tech so the other 95% can't fight back, and we are only further supporting them to our enslavement .....
I leave you with two quotes, hopefully they make sense:
"The devil doesn't sleep"
"In times of peace, prepare for war"
@@ronaldd2154 how is your design going guys?
@@ronaldd2154 damn.
Could use read switch for this
I wish more people were like you, willing to share information without trying to make a profit or take advantage of someone else. Thank you. Is there any way I can contact you privately? There are some ideas\plans I had, but not willing to share publicly right now.
This dude really believes he doesn't need to obey the laws of physics haha
At least he tried
Speculation is that the metal used is causing a fluctuation in the magnetic field and that is why the filed is not steady.
It would be wise to remove all metal except the mail metal areas and magnetic. The field pitch is of value so you may want to a magnetic field visualizer
to see what the filed is doing. The best way to move forward to to see what the field is doing in your project. I suspect you will see a magnetic spike do to the extra metals.
The key is to locate the end bridge of the field. That field is the key to creating perpetual motion
Thank you for showing us on CZcams this type of magnet motor. I do believe that I am going to try to make a motor for sure. I really appreciate your guidance for free. Hope you have a Happy New Year and peace to boot.
Why not use a disk with one hole instead of the sliding cart?
i know its kind of annoying to translate horizontal motion into vertical motion [ bevel gears as an example ], but i think its a good idea
Well you are not wrong but switching that field on and off comes at the cost of the rotational
force that you had hoped to give you the net benefit of the thing to start with for sure
It’s outside the box thinking.
The key is to eliminate the energy lost. In every case the energy gained is canceled out with friction and clogging. Magnets have energy to harness but to date no one has figured out how to do it.
No law of thermodynamics says that self-sustaining almost perpetual mechanism can't exist
Imagine quoting limiting out dated laws made buy humans.
@@5disguised I understand, humans made laws are important and we need good human made laws
Hi I’ve got some designs to share with you, how could I sent them to you?.:.
The effort to moved the shield would be reduced if you got the covering and uncovering equal. Square magnets covered by square holes achieve this. Round holes and round magnets with the holes and magnets equally spaced does not due to the opposite curvature of the opposing sides, it creates and elliptical shape on one magnet with a smaller area than the eclipse shape on the other.
O senhor não tem um vídeo que explica como funciona uma placa magnética?
any news about this project? does it work as you imagined ?