I was 13 in 1998. Triples were everywhere. Still the best sounding 2 stroke in American history I believe. Snowmobilings national anthem. 3 in a row makes em go!
Have a excellent winter guys ! I always wacth your videos whenever they pop up love the content so down to earth and real guys working on sleds I’m a articcat guy but wacthing your videos makes me want to hunt down a storm wedge cheers guys merry Christmas!!
My dad used to wrench and race for our local Polaris dealer back in the day. Small town Ellington, NY. Had a sled called "The Shooting Star". 440 wedge xcr chassis I believe. Gave 800's all they wanted in 1000'
I recall a grass drag event, 64' rupp chassis with a 1000 cat triple shoe horned in. 2nd pass, so much torque it mangled the bogie suspension and threw him over the bars about 200 feet in on the run. We thought we were fucked on the sidelines watching! Lol
I agree. Can anyone get them and just iron them on? It sounds like they need to be applied after the cover is already on the sled, I put a Scotty’s cover on my Storm that sure would look better with decals.
Can’t wait to order one of them seat covers for mine those 2 covers look sweet was gunna use a saddle man till I saw this now I have a spare cover to use on a seld that just needs to get a cover otherwise purple piping is needed🤘🏻
Looking sweet! I’d b a candidate for purchasing one of your triples when you’re ready to refresh the fleet. Have a good guys and I will have a seat for Nathan
Nice job as usual. I had one of those billet pull-start handles and I didn't like it, the recoil spring had trouble keeping it tight in the cold on a bumpy trail. This one turned out great wow.
Wow !!! Inspired me to go out and make the 1/ 2 " square blocks to poprivte 4 places to install the Fusion skid to the 2003 Edge chassis. As i hsve said in previous post, i made the fusion skid to be as close to the race skid as I could by buying as much from the race skid as i thought i could convert the consumer skid over to. Walkers both front and rear on skid. Btw i used the race 440 Fox dusl spring up ftont. Hsve a 800 XCR with VForce 2 reeds and 1/4" spacer to pull reeds out a ways for straighter shot to boost port. I opend the hole for the chsincase ( very carefully ) to accept the 2005 chaincase in order to use the phatom brake system. Lightweigt Jack shaft Race drilled caliper. Found a guy building the front " Torque Arm " from billet aluminum. It was a $130.00 but well worth it. The guy i got it ftom in 2011 was NINJAPLUMBER out of Ware Ma. For those that may want one.( if they are still being made ) dont think he is the oem manufacturer. Now they are saying SNOW in TAMPA this year (really !! ) so i gotta get the chassis down from the rafters start gettin to it 😅 Yea i know ,but never thought I'd be her 32 years. Love Michigan home state. Y'all have a great winter and get yer s**t together !!!!!!! 24 is going to be like no one has ever seen our great country go through EVER. for got the track is a brand new comoplast 1.5 ripsaw paddle Again ,,,,Thank you Todd for all your efforts through out the yesrs i watched you guys vids. GO FAST. TURN LEFT !!!! LYNN
I love the father and son work. Top quality to boot. I have a 99 xcr 800, pushed the trailing arm hard enough to roll up up the foot well. Curious what crc aggressive chassis sleds share parts?
Hey Todd, if your ever looking for another project might I suggest one of the last of the great triples. A 2000-2003 XCR 800. That to me is the absolute holy grail of muscle sleds. I should have bought one years ago when they were a little more plentiful, now those things are impossible to find in my area. Just a suggestion anyway. Keep up the great work, love watching your content.
I got a 97 xc600 triple all modded out for the time. M10 suspension, triple pipes, and a bunch more. Runs good and looks good. Ive only put about 200 miles in the last 10 yrs. Under 3000 miles total on sled. You interested in buying another one?
Love these Ultra sleds. You guys do awesome work! My son just bought a 96 Ultra SP and is looking for some triple pipes. Wondering if you know anyone selling a set.
Probably be bringing a '88 Indy 400 seat, tank cover and bar pad over to Nathan, hopefully he can do the original grey? Projects, already commented about a triple powered Widetrak. You won't regret having a 20x156" sled with low range and reverse. And for the 14 triples, I volunteer to come help, get them all on the lake in a line... set up a few microphones, get 14 voices of the Polaris National Anthem coming off the line at once!
The snowflap decal is awesome!! Where did you get it made? Also would love to talk to you about a ultra project that hopefully Trenton and yourself can help me out with.
Would you possibly be around next weekend for me to pickup my vice grip? I don’t have a ton going on then. Also if there’s any parts you’re looking for that I have you can have. I can message you on FB too
hi todd love your videos I have a1997 ultra spx got it from a freind sat for 8 year i got it running but to heavy for me at my age i would like to sell it do you now someone looking for it
hi todd i am try to sell my 97 ultra spx it has 2400 miles on it sat for 8 years irebuilt the carb and fuel pump and put all new fuel line on it to git running i am try to get about $1700.00 for it thank you i realy like the video of freedom @@toddclyne3493
Nathan Kinney the seat cover guy email: Finishlineupholstery@outlook.com
Should offer a discount for sending in old covers to use as a pattern for future customers
@@BullittOutdoors donating to help get a guy going isn't such a bad thing.
I was 13 in 1998. Triples were everywhere. Still the best sounding 2 stroke in American history I believe. Snowmobilings national anthem. 3 in a row makes em go!
Hell yeah brother
Until the 600 twin came out in 98
I was 20...same thing here...
People are going to think Polaris actually made one of these. 😂 Merry Christmas. Love the sled!
Thanks so much and you too. That was the plan all along 😁
Have a excellent winter guys ! I always wacth your videos whenever they pop up love the content so down to earth and real guys working on sleds I’m a articcat guy but wacthing your videos makes me want to hunt down a storm wedge cheers guys merry Christmas!!
Thanks so much for watching. Merry Christmas
Great to see a young man with that kinda drive and skills. His covers look great.
There is still hope for the younger generation 😁
You the man Todd these videos bring me back to the good old muscle sled days let's hope for lots of snow ❄️
Praying every night for it 😁
My dad used to wrench and race for our local Polaris dealer back in the day. Small town Ellington, NY. Had a sled called "The Shooting Star". 440 wedge xcr chassis I believe. Gave 800's all they wanted in 1000'
That's awesome
I recall a grass drag event, 64' rupp chassis with a 1000 cat triple shoe horned in. 2nd pass, so much torque it mangled the bogie suspension and threw him over the bars about 200 feet in on the run. We thought we were fucked on the sidelines watching! Lol
Wow that's some power
love your videos all of you do really nice work beautiful seat covers wow
They sure are
I always put the registration decal on the windshield
That will definitely get you stopped where we ride. I wish we could
@@toddclyne3493 I'm in Michigan. Never had a problem
Merry Christmas, Todd and family.
Central California watching
Thanks brother for watching
They look awesome, it is great to see a young person learning to use his hands to make something! There are plenty of sleds with crappy seat covers.
He's been out in the shop with me for a long time
Yes Nathan has some real talent
Love it and your triple videos! Nice work!
Thanks man
The seat decals on a repop seat are a game changer! So nice! Great job to everyone involved!!
Yes they are!
I agree. Can anyone get them and just iron them on? It sounds like they need to be applied after the cover is already on the sled, I put a Scotty’s cover on my Storm that sure would look better with decals.
@@michaelaudy6415 yes you can get them at Wedgelife.com
Can’t wait to order one of them seat covers for mine those 2 covers look sweet was gunna use a saddle man till I saw this now I have a spare cover to use on a seld that just needs to get a cover otherwise purple piping is needed🤘🏻
They sure are nice
Looking sweet! I’d b a candidate for purchasing one of your triples when you’re ready to refresh the fleet. Have a good guys and I will have a seat for Nathan
Thanks buddy
wow that purple sled looks amazing. nice work.
Thanks man
Love it. Keep up the great work 😊
Thanks
Nice job as usual. I had one of those billet pull-start handles and I didn't like it, the recoil spring had trouble keeping it tight in the cold on a bumpy trail. This one turned out great wow.
We have them on every sled. Never have had a problem
maybe my spring was just weak then, I tried one on an rxl. @@toddclyne3493
Beautiful work!!
Thank you! Cheers!
Hell yeah glad I ran into this channel.
Thanks
Wow !!!
Inspired me to go out and make the 1/ 2 " square blocks to poprivte 4 places to install the Fusion skid to the 2003 Edge chassis.
As i hsve said in previous post, i made the fusion skid to be as close to the race skid as I could by buying as much from the race skid as i thought i could convert the consumer skid over to.
Walkers both front and rear on skid.
Btw i used the race 440 Fox dusl spring up ftont.
Hsve a 800 XCR with VForce 2 reeds and 1/4" spacer to pull reeds out a ways for straighter shot to boost port.
I opend the hole for the chsincase ( very carefully ) to accept the 2005 chaincase in order to use the phatom brake system.
Lightweigt Jack shaft
Race drilled caliper.
Found a guy building the front " Torque Arm " from billet aluminum.
It was a $130.00 but well worth it.
The guy i got it ftom in 2011 was NINJAPLUMBER out of
Ware Ma. For those that may want one.( if they are still being made ) dont think he is the oem manufacturer.
Now they are saying SNOW in TAMPA this year (really !! ) so i gotta get the chassis down from the rafters start gettin to it 😅
Yea i know ,but never thought I'd be her 32 years. Love Michigan home state.
Y'all have a great winter and get yer s**t together !!!!!!!
24 is going to be like no one has ever seen our great country go through EVER. for got the track is a brand new comoplast 1.5 ripsaw paddle
Again ,,,,Thank you Todd for all your efforts through out the yesrs i watched you guys vids.
GO FAST. TURN LEFT !!!!
LYNN
Thanks for the very informative comment. Dang it sounds like one hell of a build you have going. Good luck with it
He did a fantastic job!Man I really like Parts Sled!
He sure did
im so jealous but happy you have them you take care of them ! man oh man i wish i could have just one nice triple triple lol love the vids guys
Thanks so much
Better than stock for sure guys love it!
I agree
I had a 94 RXL 650 lover it would like 1 more and a03prox 800 loved it to
I love the father and son work. Top quality to boot. I have a 99 xcr 800, pushed the trailing arm hard enough to roll up up the foot well. Curious what crc aggressive chassis sleds share parts?
I'm not sure on all of them. We have had a couple crash victims just like that
ya man finished product i like this sled way better lol merry Christmas
Thanks
As always, amazing job guys.
Thank you and Merry Christmas
@@toddclyne3493 Merry Christmas!
Yes! was going to ask if you could show us all 14 sleds. Looking forward to that! And a question as well…will your seat cover guy ship up to Canada?
I'm sure he will
Freaking awesome guys you nailed it 😮
Thanks
Nice sleds and hope to see great content on these sleds
Test and tune next
That seat is SWEET!
Yes it is
Hey Todd, if your ever looking for another project might I suggest one of the last of the great triples. A 2000-2003 XCR 800. That to me is the absolute holy grail of muscle sleds. I should have bought one years ago when they were a little more plentiful, now those things are impossible to find in my area. Just a suggestion anyway. Keep up the great work, love watching your content.
We would love to. Same here you just don't see them for sale
I got a 97 xc600 triple all modded out for the time. M10 suspension, triple pipes, and a bunch more. Runs good and looks good. Ive only put about 200 miles in the last 10 yrs. Under 3000 miles total on sled. You interested in buying another one?
Not at the time
Hey Todd I had the first 91 rxl in my area
My dealer got the first one they were hard to find around here in Pennsylvania
Great memories you have of that sled I bet
This Minnesota weather is crazy now rain for Christmas Day ? Wow
Definitely a 180 from last Christmas 😂
Love these Ultra sleds. You guys do awesome work! My son just bought a 96 Ultra SP and is looking for some triple pipes. Wondering if you know anyone selling a set.
Sorry I do not
Probably be bringing a '88 Indy 400 seat, tank cover and bar pad over to Nathan, hopefully he can do the original grey?
Projects, already commented about a triple powered Widetrak. You won't regret having a 20x156" sled with low range and reverse.
And for the 14 triples, I volunteer to come help, get them all on the lake in a line... set up a few microphones, get 14 voices of the Polaris National Anthem coming off the line at once!
😁
its like a new. wow. nice.
It is new 😁
The snowflap decal is awesome!! Where did you get it made? Also would love to talk to you about a ultra project that hopefully Trenton and yourself can help me out with.
My decal lady hooked me up with that. Message me questions anytime
2 bags looks awesome be nice if could find a purple headlight cover
Oh that would top it off
@@toddclyne3493 I have one let me dig it out
Get a PO box in nd then you can stick your registration to the tunnel. Then get bent over for the out of state trail sticker
🤣
Looking like Factory stuff look sweet
Thanks
Niceeee very sweet 10 outta 10 😮💨
Thanks 😋
Your videos are making me want to do a 650 I want to find a pumpkin haha or RXL
A couple pumpkins are coming up for sale in WI soon
Would you possibly be around next weekend for me to pickup my vice grip? I don’t have a ton going on then. Also if there’s any parts you’re looking for that I have you can have. I can message you on FB too
🔥right on sleds looking great.. 14 eh lol, I’d be trying for ngk plug sponsor 😂🔥👊🔥🔨⚠️⚙️🏍
🤣🤣 we definitely need one
14 Triples! Imagine 42 BR9ES's all firing at once!
It will happen this winter. Wait what winter 😭
Todd, where do you get the tubing to replace the oil/fuel lines to the carbs? Thanks!
Fowler parts and service
Great looking sleds . Do you have a storm 800? There hard to find around here in new york.
We sold 3 of them 2 years ago 😂
@@toddclyne3493 sweet im sure they looked nice. I just started following you. That kid does a awesome job on the seats for sure. 👍
Shit...i wish i could get him to do mine...its hard to find anyone here that will try to get it back to the stock seat...
Email Nathan
@@toddclyne3493 shipping probably kill me
Triple's rock
Yepper
Awesome, you have any sleds for sale
Not as of now. We should 🤣🤣
You never told us what the fluke was that you ran into with the SPX?
Stator went out
I was some close at 588.. :) But you don't have a full tank of gas in. haha
A full tank would have put it way over 600
Do you have any cans left or the 680 Ultra? And do I have to rejet?
Email me. polaris.trashcan@gmail.com
Email me. polaris.trashcan@gmail.com
i like Trentons sled better also the rxl with the white windshield change that broken front bumper
It will happen
I can barely manage 5 triples idk how you guys do it
It's not easy 😂
hi todd love your videos I have a1997 ultra spx got it from a freind sat for 8 year i got it running but to heavy for me at my age i would like to sell it do you now someone looking for it
Email me polaris.trashcan@gmail.com
hi todd i am try to sell my 97 ultra spx it has 2400 miles on it sat for 8 years irebuilt the carb and fuel pump and put all new fuel line on it to git running i am try to get about $1700.00 for it thank you i realy like the video of freedom @@toddclyne3493
Who came closest to guessing the weight?
I haven't looked. Trenton, Nathan and I were really close
No snow yet?
Nothing 😭
Todd last video i guess 585
42 cylinders if anyone’s wondering
😂😂 that's a lot of spark plugs
Mine are all mountain selds
😁
Seat piping definitely needs to be changed
On Cheapo yes
Have 2 xcr 600 i have questions on
We built 2 sp's a couple years ago. Lots of questions are answered by Google searching. Lots of info out there
Hard last video I said 585
I have 5 triples and 3 twins. Can’t say no when they find me. 🤦♂️
🤣🤣
586
610
👍
I see a nice 91 RXL in the background. Cool!!!
Next on the build list. You didn't watch to the end 😂
hey I play golf with that yahoo.
I don't have the slightest idea why we cannot switch our registration to a plate that attaches to the tunnel. DNR damnnearrussian.
I agree
Hey go check your last video I said 583
Awesome
I guessed 585#
NICE!!!
Todd I have 8 triples
You feel our pain 😂
Well I don't fix things like you all do but I lighten up and hop up motors must have power
I also delete waterpumps and put 12v waterpump
How can i email you
My email is always in the description. polaris.trashcan@gmail.com