DTF PRINTER UPGRADE ! | PRO A3 DUAL HEAD DIRECT TO FILM | PRINT YOUR OWN TRANSFERS!
Vložit
- čas přidán 15. 08. 2024
- DTF PRO A3 DUAL HEAD 13" PRINTER
**Link to Printer from Procolored below!**
Let’s get SOCIAL!
Join this channel to get access to perks:
/ @craftablethings
FB: / craftablethings
IG: / craftablethings
Tik Tok: vm.tiktok.com/...
My Etsy Shops:
Ink/Blanks: www.etsy.com/s...
Craft Merch: www.etsy.com/s...
✅ Used in this tutorial:
PRO A3 DTF PRINTER: bit.ly/44MqKsi
DISCOUNT CODE: CraftableThings
PRO A3 DTF PRINTER & SHAKER: bit.ly/44MVJ7F
SHAKER: bit.ly/3PxqnNM
L1800 DTF PRINTER: bit.ly/468SAQF
CREATIVE FABRICA'S ALL ACCESS TRIAL: www.creativefa...
👍🏽 One month full access to all our designs for just $1
👍🏽 Access to all resources. No limits.
👍🏽 Commercial use allowed on all resources
👍🏽 Renews at $19 (w/35% discount compared to standard rate of $29)
👍🏽 Cancel at any time. No obligation.
✅ AFFILIATE LINKS:
**I have used all items listed above and below. I only recommend products that have been successful for me. I do receive a commission when you purchase from these links.**
GLOW FORGE REFERRAL LINK:
glowforge.us/r... - $500 off a Pro or $250 off a Plus
✅ CRICUT PRODUCTS
Cricut Maker 3: cricut.pxf.io/...
Cricut Explore 3: cricut.pxf.io/...
Cricut Joy: cricut.pxf.io/...
Cricut AutoPress: cricut.pxf.io/...
Cricut Easy Presses: cricut.pxf.io/...
Cricut Mug Press: cricut.pxf.io/a17OGQ
Cricut Hat Press: cricut.pxf.io/P0XDBY
Cricut Infusible/Sublimation Blank: cricut.pxf.io/a1qXPM
Cricut Access: cricut.pxf.io/...
✅SUBLIMATION PRODUCTS
SAWGRASS SUBLIMATION PRINTERS: heattransfer.o...
HTW Blanks - heattransfer.o...
Butcher Paper - amzn.to/3dCmVwO
Heat Resistant Tape - amzn.to/3k9vqBM
Sublimation Paper: amzn.to/3bo4NYy
Oven Thermometer - amzn.to/39j1vD2
Heat Gun - amzn.to/3ntC470
Painter's Tape - amzn.to/3bZioG5
HEAT TRANSFER WAREHOUSE : ALL TYPES OF BLANKS, PAPERS & PRODUCTS
heattransfer.o...
HEAT PRESS NATION: shareasale.com...
✅EMBROIDERY PRODUCTS
Ricoma Embroidery Machines: ricoma.com/US/...
Brother SE600: amzn.to/3woa2zz
Cutaway Stabilizer: amzn.to/3mixsBJ
Tear away Stabilizer: amzn.to/3rScOtl
Water Soluble Stabilizer: amzn.to/3unlNUR
Embroidery Thread: amzn.to/31P5JyV
✅ DESIGNS, IMAGES & FONTS
Fonts & Designs:
Creative Fabrica - www.creativefa...
Design Bundles - designbundles....
✅ EQUIPMENT & SERVICES USED TO PRODUCE THIS VIDEO:
Camera: amzn.to/2ZVxxEe
Lighting: amzn.to/31FyeCz
Music: Epidemic Sound
My contact info:
Email: patrice@craftablethings.com
P.O. Box 450901
Ft. Lauderdale, FL 33345-0901
#dtf #htvront #dtfprinting - Jak na to + styl
always love when you unbox a new product and that you show us the good bad the ugly
Thanks so much for watching 💕
Good Saturday afternoon, Patrice!!!
Wishing you a wonderful weekend!!!
🌹🌹🌹♥️
Thanks for watching 💕
Hope you are enjoying your edification in Vegas❣️Thanks for sharing. This is going to be good
Hey Allaina!! Thank you so much for always supporting 💕
Oh Panda Boo did his thing! Looks great and congratulations Patrice!
Tracey
Thanks so much, Tracey 💕
What a beautiful and awesome beast of a printer!!! I'm so excited for you and look forward to seeing more creations😍
Thanks, Mar Bear!!
You inspired me to bite the bullet. My wife and I have pretty much started dtf when you you started with the 8550. I somehow missed the L1800 upgrade because I definitely would have done that too!!I’m looking forward for the new printer to come in. Epson has been good to us and we have been really good to them. Four printers later, but I’m ready to step it up. Thanks again for the video and inspiration.
You are going to love this! Congratulations on the upgrade!
how did the transfers hold up from the 8550
AWESOME ❤. I am happy for you. I was looking my eyes out…. I would have called my hubby to set it up 😅.
Keep up the good work and i would love to see more dtf and uv printing videos. 😊
Thank you! 🤗
I'm excited about this! I've been loving using DTF transfers I've purchased- they're so easy to "press and play!" I love my et8550 I converted for sublimation- incredible quality and it just works! Super interested to have a DTF version of it without paying like 10,000+ for a huge dtf printer!
That white is BEAUTIFUL!!!
It is!
hey i love printers too, i have been doing my research on dtf and uv printers but i was timid, but after seeing your videos its giving me confidence. the other printer am researching is wide format eco solvent
Excellent video! I am feeling this bad boy! Love all the features and ease of access to everything.
Well, explain.excelente demonstration..
Glad it was helpful!
On the roller heads, you should put some googly eyes to the screw heads. :) Great video.
I hope so, because that has been me for the past month. Trying to get it back up and going.
Oh my GOODNESS!
That panda face made me smile!!!!😃
Just too cute!!!
Hahahaha! It is cute.
Really enjoyed your video. But I’m going to leave it to professionals like yourself. Which is the reason for my comment. How do I contact you about making transfer for me
Thanks so much for creating this video. You are awesome!!!!!
Glad it was helpful! Thanks for watching 💕
merci beaucoup, I just need videos like this for be sure of my invest... You have the powder shaker? its ok ? not too noisy ?
Do you have a video of the Uninet 1000? I’m between this set up and Uninet. Thanks!
Same!
@@jessicaipes6982 I ended up getting the Procolored pro. I’ve had a few issues with shipping, but customer service has been very responsive and helpful. The error was made here in New Jersey not in China where the actual printer came from. I ordered the shaker that came from New Jersey and they messed up and sent an oven instead. I’m now feeling a little intimidated with the software installment, hoping to find a video that will walk me through it.
I ordered prints from a local person to me, and after the first wash the print cracked. Do these crack with any wash setting? I know some say cool wash only but if you don't do they crack?
My prints have never cracked. I have shirts over 2 years old using DTF and they still look like they were pressed yesterday. It’s possibly, they weren’t cured correctly…or maybe DTF wasn’t used. There shouldn’t be cracking.
Yes you have to know how to work the printer, a lot of issues are user end but gets blamed on procolored, started with the L1800 and now have this printer also…be careful that print head doesn’t strike film as it could scratch it and will have to be replaced.
How long have you had it for so far? Any updates?
Great video. I'm looking at getting a DTF still on the fence. How has this one held up over the last 6 months?
So nice! I need DTF to get basic crafter friendly lol 😝 Someone is going to make bank when they figure out how to make white toner of any sort low maintenance. Can’t wait to see what you make with the Pro A3!
I agree! Thanks sooooo much for watching, Bree 💕💕💕
sure hope you all have proper ventilation and air filtration and haven't been breathing in that white chemical powder
what is the biggest size you can print with that printer? Please
So, the converted ones are lot of work compared with this one right? Is better then to save and get one of these and not spend extra time with the others
Hey friend, thank you so much for the content. I did use your discount code to purchase the dual head printer.
If you don't mind, how is the machine working for you? Thanks.
what's the longest you can let it sit now without printing?
I've left hit up to 2 weeks without printing.
Hi how much noise is the machine giving off while running the whole process? when you close the door to the room can is it still loud?
Not too loud. When I leave the room, I can faintly hear it in the next room over with the door open. If I have the shaker and oven on, the machines hums…but the flapper hitting the paper makes the most noise of the entire setup. It doesn’t bother me and closing the door would definitely block most of the sound.
I love your videos! How do I get it to only print white on the words of an image not a big square around frame? I’m making koozies.
What is the power supply for the printer and shaker oven combo? Are they 120V each? Do you know the amp draw?
Does their software work with MAC? or you say you can use any other RIP software...is there another you recommend?
PCs only. I’ve heard of RIP softwares for MACS. However, I’ve never used one on my Mac
but i am planning on buying this from china, what are your views?
Great review!
Can you print gold/metallic stickers with this machine?
Can u use digital factory rip software with this printer?
Yes
Does this one also need daily maintenance? What happens when you go on vacation?
Definitely need to know. I don’t want to have to shake my machine everyday
And another one💪🏾
Thanks for watching, Gnomie 💕
Hi my name is Grace and I’m dipping into the dtf world. Do you mind sharing what’s a good ink to use?
HI! I just received my printer and am having a heck of a time. The start up software is all in another language. I noticed yours was in English, do you think you could talk me through changing the language on mine?
Let them know that you need it in English. I didn’t have to change it to English. They might have it online.
and do you like it better than the L 1800 procolored? Mine stopped working after 3 months of use and only 178 prints.
What was the issue that caused it to stop
Thank you for the information. Can this printer replace the sawgrass printer used for mugs etc
no, this wouldn't replace the sawgrass. this is a different print method.
How would you handle maintenance care/issues if you were to go out of town/vacation? Thats my only concern, and I wish they had automatic maintenance like sublimation printers
I've gone on several trips (up 2 weeks) and I've had no major issues. I've only have to run a few print head cleanings before printing. They have a coating that you can put under the printhead to keep it moist.
Can you tell me more about the coating. I’m totally new to dtf.
Thank you for this video
you are smart
How are you doing with this printer? I’m thinking of purchasing one.
Can you please make wash test video using their inks ?
Hello i have been watching your videos have do i make a purchase with you
If you don’t mind me asking where did you purchase yours and the price. I’m a professional artist and I plan on putting my art on t-shirts
Hello, can you share the link of exactly which one you are using? Have you tried the single print head?
yes. both links are listed in the description. Thanks for watching!
Soooooo jealous 😭
Hi, Angle B Designs!
Have a lovely weekend.
Hey Angel Boo!!! We need to hit Charles up. I love it! 💕
Does this printer require 220v power? Or do you just plug into a regular 110 outlet?
110 outlet.
Is this printer 110v or 220? On the site it says 220 but the plug looks like it’s standard
This one is 110
Awesome, thank you. I have been trying to decide between this and the one from custom breations. But having 220 was holding me back. Must be a typo from china
Hi Patrice. Could you tell me if the Procolored ProRip software has the ability to que multiple prints? Also, have you tried printing to this printer with any other Rip Software like Cadlink, AcroRip or EKprint studio?
I haven't tried the RIIP software with the printer and yes, you can que multiple prints.
Hello, it seems like you have everything I would like to get lol. I am glad you got this printer because I just bought this and hope to learn from you. How has it been going so far?
how is going when you use it?
Be good for selling transfers too
Does this printer have the printhead strike protection or suction vents to keep the film flat and away from printer? Trying to decide on this brand or another.
yes....suction vents
@CraftableThings no head strike plate?
Great video.. will you start to sell DTF prints
Hey Lashunda!
Yes, ma’am!
Yup, Sam and his Clang go to lunch anytime they cant fix anything. Ive been on skype with them and they leave me on read :(
Price???
How do you become a member?
How big was that print that took 3 mins. What size? Thank you.
11x10
How did you get ahold of Procolored support?? Thank you 😊
I have been going back and forth with them via WhatsApp and Skype.
Hi is this the Xp600?
Yes
Hello! Thanks for the content, I want to start in the DTF world, I am wondering can I make the UV DTF cup wraps with this printer?
Thanks
Hi, how did you get in contact with procolored I’m having trouble with my software but can’t find no contact info.
www.procolored.com/pages/warranty-policy
❤❤❤
Thanks for watching, Josie 💕
Hi what brand printer is this?
it's in the video.,
Can you send me the link
Here's the link. Thank you!
www.procolored.com/collections/dtf-printer/products/13-dual-heads-dtf-pro-a3-dtf-printer-direct-to-film-printer-upgrade?ref=cuyRfYxS
dang i need a down to F printer.
😂😂😂
@@CraftableThings hehe!
Thank you, CZcams. My bank account is mad that I am getting to watch a new toy replay
Hahahahahahahahahaha! Thanks for watching 💕
@@CraftableThings. You’re most welcome. It’s my pleasure! Thank you for sharing your journey.
@CraftableThings I love watching and learning about crafting. I just end up wanting everything, and I know I will be retiring soon, then moving to my forever home. Just thinking about moving my craft supplies has my anxiety crying
LOL😂😂😂😂😂😂
I’m soooo stressed out with this I got it to print and now it’s not printing 😩😩 it’s once I put RIP it saids completed but nothing prints . 😢 and no answer from them … any advice I’ve already reinstalled the software
do you have this printer? make sure that you have space on the computer. also, check the printer management software. it will tell you why the printer isn't printing.
If your gonna make fast business using these desktop printers you have to realize that they are not efficient in speed.
hefty price it is a true investment
Whats the price on that dtf