Temporary Tattoos in Jesmonite
Vložit
- čas přidán 12. 09. 2024
- Hey my lovelies,
The links for the moulds and tattoos are in my Amazon storefront .. linked below.
This is a requested video from several people who have asked if tattoos work in Jesmonite .. the same way they do in Resin.
In this video I show you the results and the best way to go about getting those tattoos in there. I am also testing out a new Spray sealer that I purchased.
In the video you see me using the sealer directly after making the trays. I realised soon after editing the film that I really should have waited. I will therefore try the sealer again after a 24 hour period and keep you updated of results.
I absolutely love the use of temporary tattoos. They give a wow factor to these trays.
I am a full PPE Resin Artist. Please take responsibility for your own safety and wear the appropriate Respirator, gloves and eye protection. Work in a well ventilated area.
All of my Affiliate and product links:
5% off your order at ‘Molds and Shapes’ using my code CCC5 at the checkout:
moldsandshapes...
Molds are made to order and they ship worldwide.
35% off across the site at Hemway (when a 3 for 2 offer is on - or it is 30% outside of special offers.)
www.hemway.com/
using my code: ClaireBurgess at checkout. (one word no spaces)
Resin used was Vista Cascade and Vista Coaty for top coat : (Not affiliated)
UK's Leading Resin Manufacturer - Resin Bound, Epoxy Art Resin and Epoxy Floor Coatings and Repairs. (vubaresinproducts.com)
All products used in this video and throughout my channel can be found here on my Amazon store front UK STORE:
www.amazon.co....
USA Amazon links below..
This is my UK Amazon storefront link.
USA links below.
All products listed will not cost you anymore than buying the same product outside of the link. However, if you use my link I get support from Amazon for my channel.
I have used most of .. not all products listed on this store front. However I cannot be held responsible for your purchase if the product is not to your satisfaction.
USA product links:
Moulds I use:
Silicone Mold Pot with Lid: amzn.to/3uIne0q
Silicone Mold Kit: amzn.to/2Q7iimZ
Silicone Mold Trinket Tray: amzn.to/3eiq8CD
Silicone Tray Mold : amzn.to/3e6SD63
Silicone Diamond Edge coasters: amzn.to/3uPWQ4H
Silicone Oval Tray Mold: amzn.to/3dePhP8
Liquid Latex for Top Coating protection: amzn.to/3n3meS4
Petri dish Mold: amzn.to/3szJtnL
Colours and additives I use:
Arteza set of 60 Mica Powders: amzn.to/3ekFPct
Set of 100 Mica Powders for Resin: amzn.to/3xbl6jC
Let’s Resin Alcohol inks: amzn.to/3e7RJX3
Pinata Alcohol Inks: amzn.to/2ONl9kn
Pinata White Blanco: amzn.to/3uRZLdi
Mica Powders: amzn.to/3wTtrZf
Décor Rom Dye: amzn.to/3gcGW0m
99% Alcohol: amzn.to/3xagni7
Cups, stirrers, Pipettes and accessories I use:
Stirrers: amzn.to/2QtjOzy
Silicone Spatula’s: amzn.to/32eBbH5
Silicone Cups: amzn.to/3slmmND
Wooden stirring sticks: amzn.to/32eRN1v
3 ml Pipette’s: amzn.to/3aoqHti
5ml Pipette’s amzn.to/3n2hDiH
10ml Pipette’s amzn.to/2RJuw5L
Silicone mat: amzn.to/3eeUJkr
Silicone tool kit for Resin: amzn.to/3ttFavs
Heat tools I use:
Heat Gun good for Ocean waves: amzn.to/3g9Ofpk
General use heat tool: amzn.to/3diiJ6V
Blow torch: amzn.to/3tkao8i
Crushed Glass for Geode’s, Foil, shells and more:
Crushed Mirror glass: amzn.to/3uZCOF5
Crushed Fire Glass 10lb Jar: amzn.to/3n19tHk
Sea Glass chips: amzn.to/2RPTgJJ
Crushed Amethyst glass: amzn.to/3swqISd
Mixed foils: amzn.to/3aGthLx
Multi Color Foil: amzn.to/3mZdZGz
Tiny Sea Shells for Oceans: amzn.to/3x6RLaf
Starfish and Sea Glass pack: amzn.to/32qVYHt
Silicone Rubber for Mold Making: amzn.to/3eeJs3r
Please do your research for these products I cannot be responsible for the product if not to your liking. Responsibility lies with Amazon.
Everything I do in my video is my way of working.
You may choose to work differently and what I show you here is just an example.
Loving the tattoos in the jesmonite. They look so nice & the colours you chose are lovely. You got me into the tattoos in resin a while back & these look just as good. Thanks for showing the way it didn't work as well as the one that did it really helps x
Thanks so much D ... they are so versatile I love that about them xx ❤
thanks for showing me what i wanted to know.as i dont use resin,so this is next best thing for me.🙋♀
This is GENIUS, I'm definitely going to try it . Amazing ideas ❤
Great to see those tattoos in acrylic resin! Love the grey trinket dish most because of the color and the design of the tattoo.
Thank you so much xx ❤❤❤ really glad you like them xx
Another great idea, performed to perfection! Very pretty.
Thank you! 😊 xxx as always your support is amazing x
Thank you for this! Very informative. 💐
I loved the idea of using the transfers. Let's hope you can find a better sealant. It as a great try. You are so creative. I am sure you will a way soon. I am LOVING you channel. Thanks for being such an inspiration ❤
thank you so much Laura xxx ahh yes I have filled them with Resin now ... they look beautiful xx
They look amazing Claire thanks for sharing always learning something new thanks.
Thanks so much 😊 so glad you like them xx
I love them Claire. The tattoos look amazing with the jesmonite. Awesome
Thank you so much Johnnie xx x
I learned a lot from this, spray lacquer has never been a favourite of mine. But so cool to find out how it works with jesmenite. Thanks Hun 👍
thanks girl .. yeh the advice has really been much lighter coats xx
Hi Claire, I just came across your channel as I’m looking for new craft ideas. I’m totally hooked already and love your videos.x
oh heyyyyy omg thank you so much for finding me AND coming in to my LIVE that is so amazing ! thank you xxx
Lots of helpful tips, thank you 👏👏
Glad it was helpful lovely xxx !
Love these Claire 🥰 I think even if you sand back and respray it would come up the same, I think the sealant isn't self levelling so might always leave that mottled finish. Still beautiful though.
Thanks so much Paul ... yeh I think the only way forward now is a Resin top coat .. I will have to set to it tomorrow ! 😁😁 so glad you like them ❤
They looked brilliant Claire 👍
Thanks so much Mark xx
Orange peeling next time you can try standing back further and spray a very light coat when that's dry you can very lightly sand it then spray them with another very light coat and see if that works better for you
Congrats Claire,soon be 40,000. 💙👍😎
thank yooooooo xx hope so xxx
Love the colours and love the tattoos. It's possible the pitting in the clear coat was caused by residual moisture in the Jesmonite, maybe try leaving them for a few days before spraying multiple very light layers, allowing them to dry between layers. You shouldn't need to sand them at all.
heyyy Patricia ... yes I believe that would definitely have not helped ! I will try again for sure and leave them longer x
Great video ❤️ so much great information.
Thanks so much lovely xxx so glad you enjoyed x
Hi Claire Iv this spray and iv used it to seal my resin key rings Iv painted with acrylic -I got this mottled effect at first , it was because I had sprayed to much on - Iv been using the spray again tonight, try very very light coats and let dry in between coats , Iv done 3 very light coats tonight, I love the trays BTW 💕
Hey Angela .. thanks so much that is amazing ! so helpful ... I absolutely will try again thank you :) xx
Thanks for sharing all of your tips and tricks. Love the tattoos, but I agree with you about the sealant. Not my favorite look. :)
Heyyy Emily, thank you so much ! I have fllled them with resin now they look great !xx
@@ClairesCraftyCorner hi Claire, so you can use resin with jesmonite? I don't know why I thought if you pour resin on jesmonite or half half they won't be one piece 😵🤔😵
Can’t wait for another one of your amazing videos 💜💜💜
May I ask, what colour pigments would you recommend are best to use. There are so multiple shades of red, yellow and blue. Would love to hear your thoughts 💭
Heyyyyy Mariana .... with Jesmonite you can only use Jesmonite pigments .... and there's only 5 or 6 colours available ... so you have to develop your own shades and colours from those x ❤
@@ClairesCraftyCorner thank always for all ur help. Can’t wait for the video 💜
The orange peel effec tin the varnish might have occured because the trays were a bit too warm in the sun. These look such fun to make.
Heyyy Rebecca, that is such a good point it may be that because I did have them out in the sun xx
Brilliant, Claire.
Thank you. xx
Glad you enjoyed it! xx thank you more ! xxx
Looks great 👍
thanks so much xxx
Love the green with the feather tattoos! Could you maybe try with the spray smoothing it out with a brush after you apply with the spray? Maybe it would turn out with a smoother finish?
Hey Georgie .. that is a great idea .. I will try it for sure xx
I wish I’ve waited a little! I have tried it and didn’t work for me either but the tattoo was ruined as small parts of it did stick to the jesmonite a little bit! Anyway now we know we can put them only after demoulding! 🙂
Heyyy Dalma ... ahh well I am glad I could show you and hopefully you will enjoy creating more x
I use that sealant for my resin, but on your jesmonite it looks like my skin when ice been in the bath too long 😖. Great video. X
haaaaaaa Lainey ... omg it really does haaaa
I use that can all the time. Two tips: lighter coats and spray from much higher up in continuous motions from off the piece then over then off (overshoot on each pass). Should eliminate that texture you got pretty well 😉
Also very jealous that you get to work with jesmonite since it’s basically ungettable in the US
Heyy Vincent ... thank you so much .. I will try again for sure. I am so sorry about Jesmonite not being available in the USA ... I never knew this when I started x
@@ClairesCraftyCorner No worries! I just like watching you make stuff anyway 😁
@@vincentferrari ahhh thank you so much xxx ❤❤
We call it orange peeling I still think they came out brilliant way to go
ohhh yes it totally looks like it x
I don't think the gloss is bad - if u want a texture, it works! 😆
Did u find a sealant for jesmonite besides a resin topcoat? ❤❤
Wow love them
thank you so much xxx
Thanks!
wow - thank you so so much xxxx
Hiya Claire
Thanks for the great video! Can’t wait to try it out!
I was just wondering if there was another way to seal the tattoos without using a resin top coat?
Thanks so much for sharing your pearls of wisdom
Xxxx
Heyyyyy lovey ... yes Jesmonite sealer should be fine too ... it seals the foil really well so should work just as well xx
@@ClairesCraftyCorner brilliant! Thank you so much for the reply
Xxxx
@@workplaycreate anytime xx ❤❤
Hubby said don't spray in the wind that's why you got that look.
Heyyy lovely .. thank you so so much ! this is such a helpful tip .. xx Others said it might have been leaving them in the sun x
It's not the spray sealant that was the problem per say. The "mottled" look you got as your end result is something called "orange peel". You get this when you spray to close to the surface of your piece and/or the nozzle is clogged or faulty. This is very common with cheap spray cans. You can buy packs of nozzles that spray much better for a good price so you're not wasting your product.
Thankyou so much Jamie ... this makes sense because I've had much better results with one I sprayed recently ... no issues at all
@@ClairesCraftyCorner Np, ty for teaching me about Jesmonite :)
very nice
Thankyou lovely xxx
Faab video as always. Rustoleum do a 'matt' spray? I still love them. How much resin do these moulds take BTW?
I have the MATTE I used it on a tray and it didn't have this effect ... I was just praying for a gloss finish haaa
Can we use tattoos with cement!?
hello, I love your channel, I'm looking to start to work with jesmonite, I couldn't found where did you buy it, any recommendations shipping to Ireland?Thnak you💕💕
Heyyyyy lovely thabk you so much that means a lot xx
... You actually have a Jesmonite Stockist in Cork ..... If you Google Jesmonite Stockists Ireland .... it will come up ❤❤❤❤
@@ClairesCraftyCorner wow thank youu so much!!!💕💕
Thank you Claire for this tutorial too I'm really learning alot from you 🌷🌷🌷
If you don't mind me asking I really need to know if it is possible using vinyl on jesmonite if so is should be before or after demolding? And do I have to seal it after ? I really like the matt finish of the jesmonite. Thank you in advance and I'm sorry I asked so many questions.💕💕💕
heyyyy lovely .... thank you so much really glad they are helping. Yes you can use Vinyl on Jesmonite ... that is on my list of videos to do .. You need to add vinyl .. 24 hours after de mould. This is to make sure the jesmonite is totally dry and no moisture inside before sticking vinyl x You can seal with normal sealer ... or you can resin top coat ... or you can leave not sealed if you use permanant vinyl xxx
@@ClairesCraftyCorner thank you so much for your help , I do understand it's not easy to take from your time and reply almost all the comments so again thank youuuu 🌷🌷🌷🌷🌷💕💕💕💕💕
Have you found anything to rival the jesmonite sealer? I'm just trying dishwasher safe mod podge at the moment but I dont know if it will work
heyyyy Kitty .. I have not yet but then I have so much I have not been searching x I have heard you can use flexiguard for the AC730 and people are also using tile and stone sealer xx
love these!!!
what is the weight ratio for liquid and powder for this mould?
how much liquid and powder in grams?
hey lovely .. I have not worked it out as I usually make more than one and throw leftovers in another mould .... but the finish weight is around 300g ..
Hi Claire, in paint, you would call this orange peel, but how long will it last before the finish stars to lift.
hi John ... long time :) hope you are well .. I dont think it will lift.
Was there a follow up to this video?
Heyyyyy Glynes .. there actually wasn't 😢😢😢 I have since put a thin coat of resin in each and they looked great xx
Maybe if you sand it first then coat it with clear
sanding would have taken off the tattoo but that is a great idea.. I could sand down the first coat and reapply x thank yooooo
Claire have you tried 730 jesmonite does it take longer to dry than 100 jesmonite?
Heyyyy lovely ... no I have not tried the Jesmonite 730 ... Check out Virginia O studios ... she has used it I believe. She is on Instagram and Tik Tok x
Would mod podge work?
I have seen people using it and they dont seem to like the finish x I have not tried it so sorry x
How strange, they look wet! Seems strange for Jesmonite to be shiny. They are lovely though.
thank you sis .. yeh they totally do x
How do you clean your cups after finishing your projects? Thank you!
Heyyy lovely ... with Jesmonite I wash them in the sink ... with Resin I used Selloptape xx never water x
@@ClairesCraftyCorner thank you! I’ve let them soak for one day 🙈
@@danielacristinadicu9905 is that Jeamonite ? Soaking helps for sure .... I do find that I sometimes need a brush too ... if I'm working alone and not filming for a video then I wash immediately xxxx but not always easy
@@ClairesCraftyCorner Just started working with it 🥰 didn’t realise how messy it is 🤣 my desk is full of powder. Also mesmerised by it and i’m starting how it gets hard forgetting that the cup is turning rock hard
@@danielacristinadicu9905 🤣🤣🤣 omggg how true that is .... I have made so much more mess with Jesmonite than anything else lol
It’s called orange peel 🙈
ahhhhh yes yes lol thank yoooo
Talk too much
Rightbackatchya sweetie ❤️❤️
Would love the green and grey ones Claire
heyyyy lovely .. you would like to buy them? if so just let me know and I will give them a resin top coat xx
@@ClairesCraftyCorner hey lovely....... I would love too xx