Liked and subscribed. I've had many G body's over the years with most being Monte Carlo's... LS, SS, etc. Had a 79 back in the 90s on 13 inch daytons.... been wanting a true lowrider for years..... may have to score another Monte Carlo and look you guys up in the real world.
Dam I wish you was closer to me I am in Alabama I am doing a 82 cutty that came from Vegas. It’s a eight battery three pump set up but it’s been road hard so I’m totally gutting it and putting a LS in it but this is my first time messing with hydraulics so I love watching your videos and trying to learn and trying to do it just like you, I only body shop I have the tools I just don’t have the knowledge so keep the videos coming. Thank you.
Mrs.Conoy right here in Bakersfield was my Lady. I could drop off parts to her Monday morning & she would have them complete by Friday evening. She was right there off Mt.Vernon for years AC Plating. Damn California pulled her chemicals from her for Triple Plating. She ended up closing her doors. These other chromers are fucking lazy they take way too long.
Shit after this current car I'm welding out right now the next one is coming from Arizona. I do out of state rides also just have to pay the difference on fuel or transport by hotshot
Thank You very much 👍. The extended rubber brake line for axle i make myself. I have gbody extended brake lines available on ebay.com under Lowrider Hydraulics for search bar
Man you should make a logo of a cartoon character of you with thy quote "don't do it, haha" or C'mon or "Kno i mean" or other phrases you say and put it on your work, t shirts, hats etc. They're catchy as fuck it your work is fabulous!
Yea bwoiii, so bigger Springs the better or smaller springs the better? I need some flat Springs to sit on the cups better but not sure what type for my 78 coupe deville
Do you sell the kits for the uniball ball joint upgrades, tower reinforcements, trailing arms and drop downs? Would like to get a kit shipped to Canada at some point if thats something you do
Yes sir I'm with Black Magic Hydraulics. On Deck Pistons Comp Motors Fittings Solenoids Switches Switch plates Y Blocks Uniballs Check Valves Mounting Hardware Cups World Wide Shipping Available PayPal Ready
Thats what's up!.. I got a Monte just like the one in the video..mines a 88Ls pearl white...so you do builds at your house and deliver the car to the customer??😮
@@santoscamacho3361 when the rides are Located in California I personally do the towing. When there homies & homegirls from out of state & out of country I use a hot shot company. Installs do take place at one of my properties confidential to the public for the safety of the customers rides. If you need a telescopic drive line built for your ride contact Brothers Drive line out of Bakersfield CA. The homie Sergio will walk you through the steps to pull measurements on your ride. They are open Monday to Friday 9a.m. to 530pm
No Sir. Him & His Wife were hella respectful. It was the last 5 weeks of Welding in over 100 degree weather 🔥🔥🔥🥵 and 65 phone calls on a early Saturday morning that sent me into a grumpy ass mood Lol 🤣 and I'm closed on Saturdays 😆 I needed recovery time and a damn ice cold beer 🍺 chill out with my Wife & Kids straight up
@@miguelreno7759 I'm down. I'm currently on a down hill on current install. Once I get this ride back home I will leave a couple days open for No Limit Uppers.
ALL YEAH:"NICELY DONE ✔️ VERY NICE ✔️ WORK.😅ABSOLUTELY 10-4 💯%
Bad ass set. 👍👌👌 might have to take my car to you. Love the set up for sure. Keep 💯💯✌️
Hell yea 💯 Thank You 👌
Liked and subscribed. I've had many G body's over the years with most being Monte Carlo's... LS, SS, etc. Had a 79 back in the 90s on 13 inch daytons.... been wanting a true lowrider for years..... may have to score another Monte Carlo and look you guys up in the real world.
Si 😊😊
Clean AF ur work is second to none man
Thank You. Highly Respected 👍👍👍
@@nolimitfabricationwelowrid159love your work brother keep it up 💯
Another one!🫵 Nothing like a freshly cut Lowrider! 💪🏽
Yes sir I agree. The hoe still stiff 🤣🤣🤣
That’s the cleanest lowrider I ever seen 👍🔥
💪💪💪
U LA LA, C'mon C'mon NIce monte my brother, keep up the good work. Blessing to you and your shop
You guys do clean professional work, keep up the good work. God bless you🙏
💪💪💪💪 Thank You 💯
Dam I wish you was closer to me I am in Alabama I am doing a 82 cutty that came from Vegas. It’s a eight battery three pump set up but it’s been road hard so I’m totally gutting it and putting a LS in it but this is my first time messing with hydraulics so I love watching your videos and trying to learn and trying to do it just like you, I only body shop I have the tools I just don’t have the knowledge so keep the videos coming. Thank you.
Looks beautiful and I’m taking notes for when i do a build.
Thank You 💪💪
Research is king. Know what your getting your self into, it's definitely a investment
I do know what you mean. clean work
Thank You Highlt Appreciated 💯👍👍👍👍
Thanks for showin the parts and work. I'm thinkin bout doin a galaxie.
Very nice Monte Carlo saying hi from Dallas Texas and the mystical image car club of Dallas Texas
Puttin work son!!! Happy fathers day....
Awesome work! Awesome video! Thank you for sharing!.
Thank You for the Positive feedback highly respected 💯 💪
Great work like always 👍🏼now you got me thinking about getting some chrome 👍🏼
Mrs.Conoy right here in Bakersfield was my Lady. I could drop off parts to her Monday morning & she would have them complete by Friday evening. She was right there off Mt.Vernon for years AC Plating. Damn California pulled her chemicals from her for Triple Plating. She ended up closing her doors. These other chromers are fucking lazy they take way too long.
Sick work!!! Keep up the videos you putting the streets on. #nolimit
Thank You. Until The Wheels Fall Off 🤣🤣🤣
🔥🔥🔥Great work as usual I need you in Arizona !!!
Shit after this current car I'm welding out right now the next one is coming from Arizona. I do out of state rides also just have to pay the difference on fuel or transport by hotshot
Great work, I hope to get the no limit touch up one day
Thank You 💯
Beautiful work brother …
What’s the part number on the extended brake line ?? Thanks for info
Thank You very much 👍. The extended rubber brake line for axle i make myself. I have gbody extended brake lines available on ebay.com under Lowrider Hydraulics for search bar
Clean work wish you was in New Mexico
That's some bad azz work bro!!
Dang this was the $20k ticket?
She is beitiful
You know we gotta see that thang pop lock
Always nice work 🔥🔥🔥🔥🔥🔥🔥
Man you should make a logo of a cartoon character of you with thy quote "don't do it, haha" or C'mon or "Kno i mean" or other phrases you say and put it on your work, t shirts, hats etc. They're catchy as fuck it your work is fabulous!
Bad ass fucking car 😂
Beautiful 👌🏼
Love your work man 👍🏾
Thank You. That Juicey Juice 🤣🤣🤣🤣
@nolimitfabricationwelowrid159 lol come on! 😂 wooo la la
Nice work!
Damn my boy great job
Clean AF
Man seeing this makes me miss my 83 cutless g body my first car at 15 never even got to play with it that hoe is nice 👍
Where can I get those upper trailing arms in the rear
Love it, no vinyls
Ooh la la!! That mofo nice G!
💯💯💯🔥🔥🔥🔥🔥 always wit that get down
Your fucking dope first time watching
Is it possible to have the same work done on a 1992 Cadillac Eldorado?
Yea bwoiii, so bigger Springs the better or smaller springs the better? I need some flat Springs to sit on the cups better but not sure what type for my 78 coupe deville
Nice 👍
Very Nice !
bad ass
What size bolts do you put into the ears/dog bones? I wanna drill mine out n beef em up
Sick bro
Do you sell the kits for the uniball ball joint upgrades, tower reinforcements, trailing arms and drop downs?
Would like to get a kit shipped to Canada at some point if thats something you do
I can build everything. But it is all weld in & spindles have to be drilled out to 3/4"
Bro real talk.,,.. where u located?? I needa take u my car bro
How much for all that work my guy
Can you do a video on how to do pinion angle
Yes sir. Give me a couple weeks I'm currently working on a caddi right now where I will be able to show how I do the dimensions 💪💪💪
Tough 💪🏼
How much for some wheels?
Are the a arms extended 1.5 or 2inch
How much to do a buick regal 84 g
🔥🔥🔥🔥🔥🏆🏆🏆🏆🏆
How much you charge for that
What's the total price for basic install
25k + parts
I think No Name needs to work at No Limit 🤣🤣🤣🤣
@@nolimitfabricationwelowrid159 lol but I Love your work and I got 1988 Cadillac brougham that I you would work this brougham..... Come on let me know
In Florida
@@nolimitfabricationwelowrid159 add +10k custom chrome with pristine stencil.. 100% customer satisfaction 🙏 straight cash homie
you got a contact #
Is it for sale ?
So you got your own hydraulic parts for sale?
Yes sir I'm with Black Magic Hydraulics.
On Deck
Pistons
Comp Motors
Fittings
Solenoids
Switches
Switch plates
Y Blocks
Uniballs
Check Valves
Mounting Hardware
Cups
World Wide Shipping Available
PayPal Ready
Thats what's up!.. I got a Monte just like the one in the video..mines a 88Ls pearl white...so you do builds at your house and deliver the car to the customer??😮
@@santoscamacho3361 when the rides are Located in California I personally do the towing. When there homies & homegirls from out of state & out of country I use a hot shot company. Installs do take place at one of my properties confidential to the public for the safety of the customers rides.
If you need a telescopic drive line built for your ride contact Brothers Drive line out of Bakersfield CA. The homie Sergio will walk you through the steps to pull measurements on your ride. They are open Monday to Friday 9a.m. to 530pm
@@nolimitfabricationwelowrid159 orale Gracias!
Chrome > black. Even on a street hopper.
He's not playing
Hose retainer!!! No detail too small!!
Dude crying for paying to much
No Sir. Him & His Wife were hella respectful.
It was the last 5 weeks of Welding in over 100 degree weather 🔥🔥🔥🥵 and 65 phone calls on a early Saturday morning that sent me into a grumpy ass mood Lol 🤣 and I'm closed on Saturdays 😆
I needed recovery time and a damn ice cold beer 🍺 chill out with my Wife & Kids straight up
Good ass work need some a arms for 68 impala 2 or 2.5 extended
@@miguelreno7759 I'm down. I'm currently on a down hill on current install. Once I get this ride back home I will leave a couple days open for No Limit Uppers.
Sounds good let me know doggy