@@GPGarage1 cheers mate! I do have a possible recommendation though for another video for you, I've been struggling to design and fabricate my own exhaust tips, you reckon you could help?
Flow direction is wrong in your case, v shape insade must be " inlet--> < --> outlet". And shorten that pipe after v plate towards the exit, you will get a better flow.
Yes, you can also shorten the pipe after the V sheet for better flow. I made muffler like this for my e39 523i and also was working perfectly, only in my case it was 76mm inlet and 2x76mm outlet.
Very well done!
Thank you for including the sound test, priceless information.
Thank you very much
Good job!
AMAZING WORK PLEASE MAKE A CORSA MUFFLER WITH YOUR OWN PERSONAL MODIFICATION
Ficou MUITO bom 👏👏👏
Sound's better than Stock but not too loud 😁
I'm opening up my own exhaust shop soon and all I can say, from one welder/fabricator to another, your work is beautiful mate keep it up my friend 👌👍
Thanks mate and good luck with shop. 👍👍
@@GPGarage1 cheers mate! I do have a possible recommendation though for another video for you, I've been struggling to design and fabricate my own exhaust tips, you reckon you could help?
You can email me (perogojkovi@yahoo.com) what you think and I'll see if I can help.
masterful work
Thanks
hello, please, how thick is the sheet metal most exhaust silencers are made from?
super
"priceless!"
Waouuu ! Mais pourquoi il n’y a pas d’isolation ? Merci
In this type of muffler does not insulation.
@@GPGarage1 ah ok . Very god work 🔥🔥🔥
Thanks 🙂
Loại này tiếng gầm của xe thể thao.
I really wish you would be willing to vuildctgese for others.
Сделал такой же глушитель, по ощущениям машина хуже ехать стала, чем вообще без глушителя
I don't know what you did, on this Opel Astra this muffler works perfectly, it's not too loud and it has a nice sound.
czcams.com/users/shortsMpCtCHJgXFg?si=oyZ94fNH6x5BpymE This is what made a bmw e39 2.8 liters, a pipe in the interior 63mm,) @@GPGarage1
Flow direction is wrong in your case, v shape insade must be " inlet--> < --> outlet". And shorten that pipe after v plate towards the exit, you will get a better flow.
I did it differently than in my video, bricking the partitions Flow direction - >> =[ =| < =| ]= Is that right?
Yes, you can also shorten the pipe after the V sheet for better flow. I made muffler like this for my e39 523i and also was working perfectly, only in my case it was 76mm inlet and 2x76mm outlet.
Bgm not matching 😢