How to remove the door panel Kia Rio

Kia Rio 2012 rear door panel removal.
Taking off the interior rear door panel Kia Rio
How to remove
Here is what removal tools i use :
amzn.to/2LPmZxN
With this camera I recorded this video:
amzn.to/2K8QgP1
Here is what socket set I use :
amzn.to/2NXmBe6
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Here are some AliExpress links to cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpr...
-22 pieces removal tool set
s.click.aliexpr...
-7 pieces ceap removal tool set
s.click.aliexpr...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpr...
Small Electric Drill Cordless Screwdriver:
s.click.aliexpr...
Hooks:
s.click.aliexpr...
Flexible Magnetic Pick Up Tool:
s.click.aliexpr...
Rubber Eraser disk:
s.click.aliexpr... (i use this to remove old Stickers and Glue Adhesive left on car)
LED Flashlight:
s.click.aliexpr...
Infrared Thermometer:
s.click.aliexpr...
Check out my other CZcams channel / carhax
❗Check any car's mileage and accident history with carVertical 👉 bit.ly/3b6S8pI
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpr...
-22 pieces of a removal tool set
s.click.aliexp...
-7 pieces of cheap removal tool set
s.click.aliexpr...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpr...
Small Electric Drill Cordless Screwdriver:
s.click.aliexpr...
Hooks:
s.click.aliexpr...
Flexible Magnetic Pick-Up Tool:
s.click.aliexpr...
Rubber Eraser disk:
s.click.aliexp... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpr...
Infrared Thermometer:
s.click.aliexp...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.

[@honestreviewer8076]

Thank you very much for this video, changing my speakers and fitting some silent coat as well. Perfect,

[@asamisael2720]

pro tip: watch movies at flixzone. I've been using it for watching lots of of movies lately.

[@zaynwilson7924]

@Asa Misael Definitely, been watching on flixzone for months myself :D

[@aresbowie2572]

@Asa Misael definitely, I've been watching on flixzone for years myself :)

[@brettcarson2590]

@Asa Misael yup, have been using Flixzone for since december myself :)

[@MohammedFathErrhman]

Thanks, you help me a lot !

[@timklein3962]

Good quality video; thanks; just wanted to be sure before I started prying on anything !!!

[@jaimeebussey6200]

Hey, thanks for the amazing video! I have a question... are the speakers for the Kia Rio a 6.5" or 6.75"?

[@spr0k3t]

6.5, but you can get 6.75" to fit easily. Also, with a small amount of work, you can also install a set of 7" with a custom MDF ring (will need to do some routing for the speaker to fit correctly into the MDF ring though). Last one I did I had to cut part of the door trim where the speaker cut out is to keep the oversized speaker from hitting the door with the 1.25" MDF ring. I also added some 0.5" felt stand-offs to keep the door plastic from rattling. The 7" coax set I used in a 3rd gen Rio 5 door was the Kenwood XR-1800. I did the same with the front location as well. Since the guys car only had a 4 speaker set up, I couldn't do components and still have the stock look, but paired with a decent amp we didn't need to add a sub once we finished with the install.

[@imansafaie5464]

I’ve got a question. In this video he’s showing de door panel of the rear door, but is it the same as the front door?

[@maximes4428]

Late reply, but it can help anybody searching for an answer. Yes it is the same: 3 screws at the same position, then plastic clip all around the panel.

[@FingerLickinChicken]

Do you need anything extra to reinstall the door panel once it’s off? Or does it just snap back on?

[@yunusmalik6143]

thank you
please more can you do a video about dash removal

[@puka5939]

Thank you my friend, good video it helps me change speakers.👍

[@DFCGarage]

You welcome my friend!

[@crvenazvezda3671]

Thank you

[@saulcollazos3697]

Quisiera tutorial de las puertas delanteras del Kia río por favor gracias

[@dragosrebe1875]

good dfc🎉

[@adalbertchiperco3086]

Bad name. What the model of Kia? What is the Year?

[@ziadfawzi]

Thanks.

[@DFCGarage]

You welcome!

[@babaktp2824]

Thnx, pls tell us the model of the speakers, (power or RMS)? I wanna know how much i need to upgrade

[@sfeddine8713]

kid 4 years old, can do this job

[@joaquinnorambuena7601]

Good video, but it's cut at the end

[@robasjusi]

👍Dziękuję 🇵🇱

[@nashkita77]

Rear door? Seriously? Window master power switch driver side door is the reason most people need to remove panel.