Yamaha Bear Tracker with No Spark - Part 2
Vložit
- čas přidán 26. 08. 2024
- Alright, Alright I found a new pickup coil that was in spec and finally got some spark. Be sure to verify the spec of the coil from the manufacturer or seller. I also replaced the petcock valve and fixed the carburetor, so no more fuel leaks.
The pickup coil for 1999 Yamaha Bear Tracker - amzn.to/3hRIBq8
How to Purchase our new Blade Balancer
hotshotpowereq...
HIPA Store
hipastore.idev...
Amazon Wish List Here!
www.amazon.com...
Amazon Tools & Parts
www.amazon.com...
I now have a Patreon account! Feel free to donate a dollar or two to keep my projects rolling out.
/ hotshotpowerequipment
Visit our website HotshotPowerEqu...
Visit us on Facebook @HotshotPowerEquipment
As an Amazon Associate I earn from qualifying purchases.
Im working on the exact same machine and im just beginning to throw parts at it. Carb cleaned, fresh plug and new ignition coil is due in tomorrow. Thanks for the video. Glad you won the battle and inevitability will be helping me fix mine.
Good luck. Let us know how it goes.👍👍
Great job on getting that machine up and running. Looks to me like the machine is one well built little tank. Sounds great. Thanks for sharing.
Enjoyed the atv videos. Good ones are few and far between on CZcams. Even though I drive a 98 Honda 450 foreman, I’m always on the search to catch an atv video of the older models.
Enjoyed watching your work you were very patient and calm. Wish I had your knowledge and patience thanks
Will you please do a video on how to test the CDI box
Thank you you for giving me a direction on what could be wrong with my 2002 Yamaha grizzly
Very well explained and visual video man!
Thanks 👍👍
Check your battery voltage while it's running. Voltage regulator is known to over charge and burn up the CDI and Pickup. It should not go above 13.4v-13.8v max. I have seen quite a few that were putting out 14+v after they run for a couple of minutes.
what website did you go to i need to get that part for mine thanks
I’m on my 5th aftermarket cdi for my 87 moto4 350. ,,,, they seem to be junk for the most part
What is the name of the place you get the second pick up coil?
Good deal, bad new parts suck. I would consider getting a carb rebuild kit, cause I expect that float or linkage is old and gonna happen again when you least expect it.
The day after I shot the video, I decided to put the carb in the ultrasonic cleaner...just to make sure.
great video, I have a 94 timberwolf, now i know how to try and find out why i have no spark.where die you get the replacement pick up coil? and have you found a good replacement CDI? how would you test the stator? sorry about all the questions, but you know what youre doing........
@James Thompson did you get any answers/parts you can recommend by any chance? Thanks in advance!
I have this exact model and the machine works just not when I push the start button... new coil pack, new relay, new handlebar switch... neutral and reverse light works when the key is on. I can turn the machine on via the main switch neutral like comes on, kill switch not on and I push the button to start an nothing happens... no click no start! I can jump the solenoid and the machine starts...can you do a video to help me... Your video is very well explained and step by step. I’m gonna clean all the wire connections and test the pulse coil...
if you're jumping the solenoid and it works your solenoid needs to be replaced
So it was the cdi? I've got a polaris sawtooth with same problem. Sometimes it woukd spark and crank now it just won't spark at all.
Use partzilla for atv parts
first