【YAMAHA SR400】5cm Extended Swing Arm ~TIG welding Part.~ (English subtitles)
Vložit
- čas přidán 12. 11. 2018
- Extended swing arm video of SR400
It is a welding part!
This time we will finally use the TIG welding machine!
TIG takes time, but it is the best as it can be beautiful!!
A thin tie→Tonkotsu
A thick tie→Kero
【Twitter】
/ nantoka_zyukou
【Instagram】
/ nantoka_heavy_industries - Zábava
Like everything made in japan looks on a different standard of quality
Thankyou! I’ve been researching about this, it’s been bugging me the whole time.
Great job and I like that!
thank you guys,,,now i know how to extend motorcycle swing arm,,,,,
Good job
Show , trabalho muito bem executado !!!!!!!!!!
That's alot of work for next to no extension
You should consider getting a more linger spring. It looks like your bike will fall apart at the rear if you didn't
Very excellent work! You should be pleased with the result. I hope Mr. Tonkotsu is very very happy and pleased with the result. Looks Great!! How does it ride?
Im a tig welder in PH nice weld
Good work fellas, I have question maybe someone here could answer. Why do they work on the floor like that? why not set this onto a bench top so you can be in better position while welding/ working.
なんと言うことでしょう❗バイク工房おいかわさんは、近所ですがね「なん重」さんたちも近所なんですね、関西なまりが名古屋弁ではなかったので、もっと西の方たちだと思ってましたわ、いつも拝見していますよ、次がたのしみですわ。
直進安定しますが曲がりにくくなりますよね!わからないかもしれないけど!
Sr400form Thailand 🇹🇭 🙏❤️👍
ショックが変更無しなのでスイングアームの垂れ角が...
簡単にいくなら、ショックをもう少し長い物に変更が吉かと思います。
Any reason for not doing multipass welds here? Warpage?
What is the main advantage of the 5cm extension in the SR400 swing arm?
@@simonsaysride9961 Aesthetics makes sense, not to reduce acceleration wheelstand then :)
英語の勉強にもなって良いです(^-^)
英字幕ってことは外国人の視聴者さんが増えたんかな?
sir i m from Pakistan.sir I can't understand Japanese language so please describe in english and please tell about engine and transmission please i like to know please
Michakuronはわからんのぢゃないのか?
👍🏻🇺🇸
さっそく英語テロップが入って来ましたね!しかし、日本語とダブって見えない所も有りました(>_
リアサスの取付角度が鋭角になるから、乗り心地が悪くなってるような気がします・・・
取付後の乗り心地のインプレッションが気になります・・・(´・ω・`)
First extend the rear suspension don't be so foolish !!! If ur extending the swing arm u have to extend the suspension too in these type of bikes !!!
想像以上に下手だったぁ…
まず溶棒の送りが出来てない、というか持ち方が出来てないから自動的に送れない。
送れないから溶接が止まる。溶接が止まったり、余裕がないから溶け込みが足りない。
ビードの美しさは直線ではなくwwwwwwwwwwwwwwwwwと進んでいかないとでませんね。
ま、それは見た目だけの問題だからいいとしても、溶け込みが足りないのは強度不足を招くので注意しましょう。
まぁこんな部品溶け込みが多少不足したところで大丈夫だろって話もあるけど。