Trying Out The OTC Hub Grappler 6575 Kit
Vložit
- čas přidán 10. 04. 2017
- Come along with Eric O. at the SMA shop as he replace a press in front wheel bearing in a Ford Fusion using the new (new to him) OTC Hub 6575 Grappler. This is a perfect edition to his older OTC Hub Tamer.
OTC (6575) Hub Grappler Kit: alexa.design/2p0sYl9
OTC 6575-1 Hub Grappler Puller: alexa.design/2nyKxM7
OTC 6575-2 Hub Tamer to Grappler Update Kit: alexa.design/2nyFaMU
OTC Hub Tamer Video (add on bearing) • OTC Hub Tamer Elite 65...
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the S.M.A. "A-Store" and help support the channel! : astore.amazon.com/httpswwwy083...
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: www.patreon.com/user?u=5031451
THANKS A MILLION!!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair. - Auta a dopravní prostředky
I really like the extra detail you put in your work. In this video for example cleaning the bearing surface before installing the new bearing. I'm suprised how many channels you find where they just press the new bearing in without cleaning the bearing surface. It drives me crazy when I see guys not cleaning a bearing surface, reusing cotter pins, not removing grease from brake pads, and other things.
Nice work Eric !
Thanks Ron
He's called a *PROFESSIONAL* for a reason.
For the guys who only have a cut-off tool... slice a groove across the face of the race 3/4s deep and hit it with a wide chisel. Will usually crack the race so you can slide it right off. Works great on Diff carrier bearings after the cage is removed. Be careful not to cut too deep
I just put the hub in a vise and use an air hammer and chisel between the race and hub. Gives me enough space to use a puller... Or more realistically continue using the air hammer to push it off. Takes like 3 minutes. Easy peazy
Eric O , You have really inspired me to work on my Subaru. It takes a little more time but I love the way you run through and simplify the diagnostic process. Keep up the great work on CZcams. Again thanks EJones.
that's strange, when i do bearings there's lots more swearing and physical injury. You must be doing it wrong 😂 haha nice work
LMAO!!
And blood... LMAO
I watch these guys on CZcams and every bolt comes loose and some of them like last video I watched the guy even used an adjustable wrench with a torks bit in it for taking out tork screws and needle nose pliers for snap rings yet I use snap on tools and every bolt fights me and half strip or break lmao I guess it wasn't meant to be. I'm replacing the water pump on my pontiac vibe Thursday or Friday. Wish me luck
🤣🤣🤣🤣👍👍
Yea when pulling a wheel bearing I usually want to cause physical harm to someone while motherfucking the world.
Based upon this and a couple other reviews of the OTC 6575 kit, I ordered this kit and 4 bearing assemblies and DIY on my Altima. I managed to break the first forcing screw by omitting the necessary lube AND forgetting to remove the bearing snap ring. Got a 2nd forcing screw ($55) and applied lube liberally before utilizing it. The rear bearings were super easy while the front ones were nothing short of a pain in the buttocks. Now my personal conveyance drives much quieter than it has in a few months. Its difficult to tell when it began, The bearing noise gradually sneaks up on ya. Overall the OTC 6575 kit was a great investment in my ever growing collection of tools. Thanks Eric!
Excellent video. It's real, not staged, full of typical things that we hacks run into all the time. You handled the challenges and irritations professionally. I like your creativity when met with a challenge. Work the problem people.
Thanks
Hi Eric , you’re exactly right. We grind the heels off the legs to grab the reveal but we’ve also ground a g clamp to tighten against the legs so it won’t slip off 😊
Thanks Eric for your videos - especially on brake hardware. I just recently did front brakes last summer on my Honda CR-V and with your advice, also worked on the rear discs this past weekend. Wow, what a difference. It stops better, very little or no noise and lasts longer. The tip of using Permetex Purple Ceramic Brake Caliper Grease and cleaning and sanding off rust on contact points on the caliper, caliper bracket, and the backings of the brake pads. I now do my own brakes and not going to friends and shops due to the fact that they just throw the pads on and ship them out without doing the "detail" work that makes the brakes work better and last longer. Again, Many Thanks!!!!!
We got a Grappler at our shop about a year ago. Very handy! Used to take the knuckle off and take it to the machine shop to press the bearings. Depending how busy they were, could have a car torn apart on the lift all day. Just did a Kia Sedona last week and it only took an hour or so. Of course, between phone calls. :)
Ahhhh the PHONE!!
Hi Eric. I use a small cut wheel & grind side ways on the race. Once you get most of the way through just put a chisel in the cut & hit it with a hammer & she splits enough to slid off. Just another way to approach it. Love your videos. Watch them a lot. You are very good with electrical issues. Keep up the good work
Dremel?
Wiz wheel
@@Enonymouse_
cut off wheel.
Exactly what I do... Dremel EZLok abrasive disk, almost all the way through, sharp(ened) chisel, pow with the crack hammer... off
I love the way that you got that old o-ring moving. Nice touch! Thanks! Answering almost every comment, impressive contact with the "people" Mr. O.
Hey man you know how it is. Gotta keep "the people" happy :D
lol love this video. Been watching you for 7 years. After working for a dealer and city. I’m finally starting my business, because of you always saying if , I can do it you can do it, and I’m finally doing it 😢. Thank you. 🙏
when i have to get the race off, i take a grinder and make a diagonal cut in it, then take a chisel and a hammer to crack the cut and then you can usually walk walk it off the hub. neat little trick i learned at work. it is a huge time saver.
And i just wanted your large evap diag video on the pontiac torrent, and found it very helpful! Im in the market to get an autel scanner along with alot of astro tools after seeing your use of them, so a very big thank you from a fellow technician!
Watched* not wanted. Silly autocorrect
i was taught the same thing at work. Grind a line across it and use a chisel to crack it.
my girlfriend just said " I hear you're watching your online boyfriend again, I recognize the guys voice"
she even quoted the "here's you're problem lady !" Lmao
'There's yer problem, lady', and my wife says it all the time
Ditto. My wife says the same thing.
It needs to be on the SMA apparel!
@@Syncopia Yeah. "Here's your problem lady" t-shirt. If would be worth it to have.
My wife says he sounds like Beetlejuice.
Looks like a great tool! Great tip on using the vice grips to hold the puller. Never thought about do that before!
What kinda farmer are you if you don't know every vice grip trick in the book!? Come on Jay your letting me down here haha See you do need some IPA. It clears the mind!
LMAO, I never even owned a pair of C-clamp vice grips until a couple years ago. Now I do know a few regular vice grip tricks though ;) IPA clears minds eh? Not the ones I've tried :D
Man, watching you use the proper tools and what-not almost makes me rethink the home-garage suspension work...
Another great video.
I didn't think the Hub Grappler would be strong enough. I've always removed the knuckle and used a 20 ton Norco Shop Press. And there has been times I've seen that thing get stressed and struggle a bit.
Hey Eric that snap ring landed in my garden...you want it shipped back?!
Great video!! .... Love the way you see things not going your way the first time, it's so normal to have all this happen, ... Most people cut the video so everything goes first time, in which it never does!! ... Thanks for sharing. Keep up the good work.
Thank you alot, I just purchased a 2008 Jeep compass, bushings, back wheel bearing needs replacing so watching you it cost me less by doing diy
Every time that I have to use my air hammer at work now, I'm always like "Big Nasty for the win!"
So glad both my vehicles have hub assemblies, bolt off... bolt on... job done
Lot easier for sure!
Wow!! Good job on the demonstration on how to use n OTC tool kit properly, very thorough n precise n little short cuts of dos n donts.. Very educational 👍🏻 keep up the excellent work
I just ordered my kit tonight. I always used the old shop press but that looks so much easier and quicker
I always put the bearing in the freezer to ease installation whenever there is a interference fit. Dissimilar temperature sometimes will surprise you. Fork stem bearing on a motorcycle is the opposite, you would heat it up.
Thanks for these videos, Eric.
REAL MECHANICS GREAT STUFF SIR A LOT OF WORK INVOLVED FOR A SMALL BEARING PEOPLE DONT realise
Got my SMA fix for the day!Always fun to watch!
17:43 I am going to start wearing safety glasses watching your videos. Sheesh.
You might have good hearing now, but believe me if you don't use hearing protection you will loose the ability to hear good. Please save your hearing because you won't ever get it back. Your young enough to save it, I'm not, but I use protection all the time now to save what I have left. I love your channel, good job.
Seriously, he's not kidding. Hearing protection. Eye protection. Every time.
I'm mid 20s and I can tell when my power tools are too loud! 45db folks
With the guys who haven't worked a day in their lives please don't comment.
Switch to electric tools, air tools are far too noisy. There are a ton of very good cordless that`ll do much of the work you need including impacts. Use air tools only when absolutely necessary, it has saved myself a lot of ear ringing.
Doug Peterson Yeah I totally agree. Between growing up in a NRA family and discovering Dad’s air tools , my hearing is 💩💩💩
As a home gamer I wish something like this could be rented. Love you work Eric!
I just replaced my front left wheel bearing today. Had the same problem with part of the bearing being stuck on the hub spindle. Used an angle grinder to make a diagonal channel on the bearing, then used my air chisel on the channel to get it rotating and it moved slightly outwards. Changing chisels, I was able to get it off without damaging the spindle.
Need to be very careful not to grind into the spindle.
Was a very difficult job, factory bearing and hub from 2010, lots of corrosion due to Canadian winters and roadsalt. My first time doing a bearing replacement, and it was a success.
thanks man i just bought this grappler , perfect video
Oh yeah, finally some rusty wheel bearing work with air tools!!! That's what I subscribe for.
Haha hey Tom, yeah I try to throw in some nuts and bolt videos in between the other stuff :)
Good thing I had my safety glasses on, you almost got me in the eye with that snap ring!
I really enjoy watching your videos, you do a great job and aren't big headed at all. All the best to you
Nothing like starting your day with a new SMA video. It's better then a cup of joe. Now I have to get one but hey you could never have to many tools right?
Another amazing video Eric.
That's right!
that was swell !
Thanks for the inspiration
Keep on trucking (from France) !
Thanks!
Always great video's great sound and interesting patter. Thank you so much for all of the time and event. Best wishes to you and your family.
This video got me hooked to this tool so much I bought my own!!! Only thing I have not been able to find is the famous bearing that you use to make last the tool longer. Great video cheers
Great tool. Be careful of the book. First time I used it, was doing a Escort Zx2. The manual said I should use the 311882 receiving cup and the 314305 adapter to force the bearing out. The 314305 was to large. It was on the body of the knuckle meaning it couldn’t press the bearing out . Needed to use a larger receiving cup and a smaller adapter.
Excellent procedure, my grandaughter has a Saturn Vue, wheel bearings are failing after I have replaced them both two time, just looking for an idea to put good Timken bearings in the old hubs. How to separate the spindle from the bearing. This bearing kit you use looks to be the ticket for the job. Thanks for all the great videos!
Dang Eric, you almost put my eye out with that snap ring. Good thing you make us wear safety glasses! Thanks for video.
Thanks for the Video Eric, really enjoyed that I feel your pain my backs knackered oh for a new one.
I'd really like to see this job on a mkiv Jetta. That bearing race is impossible to get off without ruining the abs sensor ring. At least for me it is. I'd love to see a method for getting them off without ruining anything that matters. Great work, BTW!
Facts!💯 Did one this week both front and stubborn as shit..
You monster, robbing us of brake cleaner in a video :P
:( I repent I repent!
Incredible video. Thank you for making it. I bought the OEM tools version of this kit, but you did an incredible job, and I loved the Pirate voice. Made me feel like my uncle was teaching me.
Your Uncle is a pirate? 🦜😅😂🤣
How is that OEM tools kit holding up? I'm thinking of getting it too
@@supersabrosinho It didn’t really hold up, sadly. It didn’t make the wheel bearing come out. It did make the wheel hub assembly move a little bit, but ultimately it was a disappointment.
If you can find it, get the OTC version of this kit instead as I know OTC is AT LEAST 3 times the quality of OEM tools. OEM tools brand quality just isn’t there. Thankfully I got my money back 👍🏼
P.S. It’s worth nothing that I was not using air impact guns like most technicians. I was using Milwaukee’s “fuel” line of impact guns. I think the max one I had was 4,500 ft lbs of torque
Lots of valuable info on you page. I've been doing it for a living for 28 years. Still find different ways od doing things. But I also have a few tricks up my sleeve. BTW just got a Pico scope. It's amazing. Found a problem on a audi in 15 min. Typical other shops replaced everything but the sink.
I flinched when the snap ring flew out. I'll wear my safety glasses next video.
I'm wearing my safety glasses and my safety pants , ( leather front leggings on top of jeans ) and safety boots .
You just can't be too safe this side of a video .
*@**15:20* Mr. O's tool is so big and powerful- that his balls are hitting the floor.
Nice video of tool in use! When removing inner race with a small lip I never use a rattle gun to start it, most often just takes hammer energy and vibrates arms off. I tighten it, spray some good ole go quickly spray on shaft, go answer the persistent phone.When I get back it I usually can tighten more or a strike on the bolt head of the tool and it's away. Even with an acme thread have found rattle guns hammer action can bind threads whereas a smooth crank on it doesn't. But there is always the exception to every rule, but as you say, we have the solution!
Some funny stuff my wife was imitating the sound of your angle grinder while watching your video,, priceless.
That snap ring almost hit me in the eye.
Gotta duck!
South Main Auto Repair safety squints were engaged
@@SouthMainAuto Not the first reaction on the list when your neck is not 100% (lol). Over here, we vered right rather fast.
use a split bearing puller on the bearing race works good.
I was cheering on the Lil nano if she pulled off that job I would've been sold lol,great video as always Eric .
Hey there. Back about 35 years or so that pic you use to clean out the locking clip groove,was a cotter pin tool. But sure made a good pic. Keep up the good work.
you wouldnt like rust free automotive...you only need like... 6 tools.
I laughed a little too hard on this one
And you can never find the 10 mm socket!
I have thought about how nice it must be to be live in a place that doesn't use salt.
Love the grappler.... lol 'there's the phone again!'
Hah true story!
Nice 3D flying snap ring action. I actually dodged and got some of the good stuff in my eye. Wasn't wearing my safety glasses as usual. Thanks buddy.
Another great video sir. I have really been looking at getting a Hub Grappler since I'm working from home now and do not have a press. I think you have just helped me make up my mind. As always, enjoyed the video sir.
Trust me you wont regret it. i have used the hub tamer for many years and love it. Links in the description box.
Safety tip: secure the part in a bench vice instead of holding it by hand!!! I learned the hard way 43 years ago when I almost severed my thumb!!! And I was holding the part with pliers.
Neat trick with the cutting wheel. I would have been heading for the torch.
The right tools make all the difference in the world. Thanks for the video.
I have that tool I love. It saves you time and also keeps you from having to do a wheel alignment after you do the wheel bearing.
gear oil on the threads and on the "bearing". works like a charm.
Nice job, but I felt something was missing.... On an unrelated note, I have an unexplained urge to go to my garage and spray Brakleen on something.
Haha get some!
That's a bad ass kit. I don't do enough car work to validate the purchase but I wish I did. Excellent video as usual
I replaced a rear wheel bearing on my sister's 2008 AWD Fusion. The design is such that you have to remove the whole hub and knuckle assembly to get the axle shaft out of the hub. I think I spent more time fighting that stupid rusty snap ring than I did removing the knuckle. At least the front one will be easier when the time comes thanks to this video. Keep up the good work, Eric!
I have the same kit & it works great and I even bought the hydraulic ram kit which eliminates the possibility of jackscrew thread failure...there's nothing like hydraulic power. Hope your neck is temporary. I have degenerative disks in my neck concave instead of convex and sound like that bearing but I have been blessed over the years so you learn to live with a little pain & crunching noises. Shoulder surgeries are all healed up so good to go :D
Maybe OTC could make you some replacement washers to shim in there ;)
South Main Auto Repair HaHa nobody is touching this neck.
Leave it to ford to come up with a Toyota idea of putting bearings in. Ahh makes life easier. Remember on those snap rings, always keep the champhered side out.
flat side out fool...
these vids are one of the most informative and useful on the net many thanks for sharing
Thanks
Nice video! Big Nasty is never too big! I was pretty upset there was no sound effects for the lubes☹. What I do to save time is to cut a slit in the race with a small cutoff tool then use a mallet and chisel to break it away. Nice tool set up! I need that in my life. Thanks!
Cool way cutting notches to remove the race, BUT...Go low tech, I use my little dremel with its little 3/4 or 1 inch cut off wheel and cut the race at the hub, with the cut off wheel at slight angle to axle sleeve so I dont cut the hub, then when nearly thru just one bang with hammer and chisel it splits the race every time. I've done 3 that way and never has taken more than 3-5 mins to do so.
Go low tech and listen to Navy Submariner who had to do this at sea using only my teeth!
Also how I've always done it
One thing that I learned in the navy was that every Mechanic has THEIR own favorite way of doing what works for them. I had to learn 5 different ways of doing the same thing once.
Then after I became the trainer later on. I tried to find out what the trainee was comfortable with, if possible, Then taught them the Navy Aviation Book way, the "Don't do that" way, & the reduce your repetitive motion way.
At least one guy went on to Retire an E-8 after 26 years.
I do a similar process only after I use an air hammer with a dull chisel to knock it off. It is much faster.
Great video! However I usually change the hub as well, due to parts store warranty's in my area.
Your video's are the best on the internet. I have a Harbor Freight bearing puller. First time using it, the bearing moved maybe a 1/4 inch and the threads pealed off the forcing screw. Harbor Freight sold me a new one at thier cost. Again, same thing the first time using it. Last week I did wheel bearings and I put the new bearing in the freezer for a while. They pressed it like butter. Thanks
Oh man bummer about the HF kit. Makes you wonder how any one even uses them!?
Replace that threaded bolt with a piece of grade 8 threaded rod and nuts from www.mcmaster.com and you will not have to worry about it again, also use a thrust bearing instead of just washers. Never had a problem after that.
did you see my video I did on adding the bearing?
I used a knockoff pitman arm puller and it did the exact same thing. I had more metal shavings then progress
Yes I did, I did add a thrust bearing to both and I lubed them well.
I know your feeling. As someone who compulsively shoulder-checks at every opportunity on the road, the commute to school has been painful.
Normally i just cut the race of with a cut off Wheel and use a chiesel with a rag over the race and smack it so it breaks and it can be slit of easy
Good tip with the rag over it first :D
I only cut a small groove into one side of the race then hit it with the air hammer, takes 2 mins or less.
I do the same. Comes off quick with no special tools. Any press fit stuff on the wheels I take off with a cutoff wheel and chisel. Titan axle seals I've gotten down to 15 minutes a side from when the wheels come off the ground to when they hit the ground. Includes R&R axle bearing and spacer.
Big nasty needs its own intro sound effect
Hmmm have to think of a good one!
It does in the newer videos
I was surprised they used ball bearings in that hub. I enjoy your vids. You are funny when things don’t work quite right.
My tip for those snap rings is to always plan on replacing it. Run around the old one with the torch will take the springy-ness out of it making it less of a missile. For one heavily rusted in the groove it will loosen it up there also. Tapping it with a punch while heating and cooling will loosen it up also. The stubborn ones may require a couple applications of fire but they always give up.
That hub grapler is a nice kit, i'm so jelous. I've done some DIY jobs with some stuff i borrowed from a machineshop and those terrible one use chinese kits on ebay. 😂
You might want try what we in aerospace use, Use your induction heater on the bearing race, it will expand and slide off due to different grain structure between bearing and spindle.
Yes sir I have done just that in several occasions and it works fantastic!
South Main Auto Repair love to see that one day
South Main Auto Repair Eric which 1/2"impact did you use once the nano couldn't handle it? It seemed like your air gun had plenty of torque. I've seen you use earthquake harbor freight cordless impacts but I'm trying to find a really good 1/2"air impact but on my cheap budget. Thank you sir if you see this and answer. And thank you as well for taking the time everyday to teach us!
@@BuggysTowJam ingersoll is always the best bet for impact wrenches
Even with a thousand bucks worth of beautiful on-size pullers plus infinitely skilled seasoned hands, this is still a nightmare job.
This one vid alone shows why shops charge for this, not enough probably if working from book time.
Hats off to you, sir.
nice video. For us out here in the west we get all the rust from out your way. Keep up the great videos
I see one improvement to make to the grappler, replace those set screws with thumb screws.
I was thinking of putting some wing bolts in there actually! Good call.
Then take a soldering iron to the box so it will fit and the lid will shut
I'd prefer Allen Head Fasteners.
Good video, but where's the Good Stuff? How can you clean without it? My life is in shambles Lmao
Lol Next time I promise!
17:19 17:44 This man says *WHOA* with more enthusiasm than the current Crash Bandicoot 🤣😂👌🏾
Hi Eric , I'm a new viewer sort of, been watching for a while , always enjoy your videos, thanks for making the videos, Ingemar from Newfoundland.
"That's for our headphone users" Thanks!
Haha YW!
Jason Steih In Dolby Surround in theaters near you!
Sorry haven't watched all vid but why not just a cut off wheel across the bearing inner race & crack it with a chisel to get it off the hub ?
Oh you could have for sure but this way here we are sure not to grove the spindle
and his way he gets to use all those thousands of dollars worth of specialty tools that will sit in tool box 360 days out of each year
Cause he just got the fuckin hub grappler karin
Your definitely the hub master good job taking that race off
picos,grapplers,Smith and Wessons oh my.you have all the fun tools Eric.
Haha
'For our head-phone users.'
..... thanks.
Haha YW!
not any fun without the rust
I know right!?
Trust me, it's a lot more fun without the rust. First being from Pittsburgh and now living in Arizona. RUST SUCKS!!! My pal Max is from Montreal and now lives here in Phoenix too. He's a professional Lexus mechanic and thanks God everyday that he no longer needs to deal with rust.
I have to say, Among all of your talents the thing i believe I respect the most is you use tools as what they are "TOOLS" if they can't handle it they go away.... As with all your videos great job and thanks for sharing.
If it is junk, I fling it... or modify it :D
That retaining ring almost hit me in the eye❗🤓
If that was my car, I would want the Hub replaced, for obvious reasons...
Help us mere mortals by telling us why
Pip Parker ?? Hub replacement?? Excessive Rust in CV axle spline area or spline wear?? Desire for an “easy” new set of wheel studs?? Hub face extremely rusted?? Beats me what he’s getting at. Did you figure anything out??
Come on Eric, you don't need those fancy tools. I''ve seen you yank those hub bearings out with your teeth, manly style. :-)
No one likes a show off Glen so why boast ya know?
nice to see a proper mechanic, if that was taken to most garages in the UK they would have wanted a new hub and stub axle, there are not many mechanics left anymore only 'Fitters' ,well done
neat tools. never replaced hub bearings that style before.. thank you for the info.