Making a Halo Infinite Master Chief Helmet
Vložit
- čas přidán 2. 06. 2022
- In this video I go over the sanding and painting techniques I used to make my Master Chief helmet
3D Prints: galacticarmory.net/products/m...
3D Files: galacticarmory.net/products/h...
Visors: galacticarmory.net/products/h...
Flashlights: www.etsy.com/listing/11569499...
Want all newly released files? Check out my Patreon: / galacticarmory
Filament Supplier: www.zyltech.com?aff=57
Use code GalacticArmory5Off for 5% off your filament order!
My recommended 3D Printer for beginners: amzn.to/3lE8oXp
Interact with me on Facebook: / galacticarmorystore
Follow me on Instagram: / galacticarmory - Jak na to + styl
What would be really sick is if someone made a Spartan helmet with actual tiny cameras on the outside near the sides and put little screens on the inside so you actually felt like it was giving you a HUD view.
I don't remember to what extent they did this, but Hacksmith Armory did what you're talking about. At least the cameras part!
@@PastaLuke you mean Hacksmith Industries, right?
@@BlatantlySwedishPGN lmao yep 😂
Check out Installation00! He's making a full fledged functional Master Chief suit! It is what you just mentioned and more!
Installation00 and Hacksmith have already done it, I am currently doing it as well, its like some sort of vr experience feels good but the hard thing is that cameras have to be really high quality for it to feel good and not make you dissy which is hella expensive lol
Fantastic work! The light feature is a really nice touch. Also the shade of green is perfect!
This is absolute beautiful love the video and how much time you take to show step by step and explain what you are doing
someone was asking me about the acetone/bondo in an airbrush and I'm glad you referenced how that's nottttt the best thing to do. everyone's looking for the silver bullet for less sanding but it's just a fact of FDM printing, you're gonna be sanding no matter what lol
You're exactly right - shaving off minutes of sanding isn't worth the potential risks
That's sick! And a custom vacuum formed visor? Never heard of that being used, sounds really cool! Both my helmets are also nearly done, gonna give away the second one next week if the postal service can deliver the visor on time :)
Hi
@@orsom1234 hi
@thebattlefrontier1051, could you give me a link at where you purchased your vacuumed visor. It would be greatly appreciated.
@@tarkentonlarry9973 I purchased a Hobart face shield way back then, directly from GA here as I was making Mandos. They make finished vacuum-formed visors now as well though! I have a 10% coupon code if you buy from them, let me know if you want it :)
thank you so SO much for this! i sense an early christmas present for myself >:3 also some great tips in here for general armor work.
thanks for showing the process! im getting ready to start prepping my 3d printed Doom Slayer helmet and i haven't a clue on the type of paint or detail techniques im going to be using, so this helps!
Awesome work Sir.
So Awesome!!
This is really cool I think a marine helmet would look great as well
Yesss more helmet videos pls
Could you possibly make a how to paint video for the bad batch crosshair helmet? Also I LOVE your work!
Could you make a video of the Cavallino helmet Im saving up for it and was curious on how to assemble everything including on how to install a visor and also what materials I would need to use for everything
Great video! It literally looks just like the helmet from the game! I’m making a Star Wars helmet out of cardboard and was wondering if bondo would work without cracking. Any advice?
One thing I dont see enough of is people doing up the interior of the helmets. You should do a video on that, especially if you can get one of those custom liners.
Wowlooks great!
He is the master of star wars helmets!
in the process of doing this file in PETG at 102% sizing. I'm interested in the lens video, because I was going to do a mirrored motorcycle lens, but this one completes the look.
Ah a fellow big head brother. I’m testing if my head would fit his Cavallino helmet without increasing size, and I think I’m going to have to leave it in two parts to be able to wear it.
@@CAMOxXxFluffy ya, sad part is, this still doesn't fit me. lol This one I'm printing is for a friend. When I did a Mando helm, I had to scale up to 106%.
Hello i was just wondering how big is your 3d printer?
I am curious if its going to fit on my ender 3d printer.
@@RZK_Propshi i was just wondering if u know how big the helmet is?
@magnusuvwiik7940 I printed it in 3 separate pieces (back, visor, and front face). All 3 fit easily on the CR10s I have with room to spare. Depending on the sizing scale you need and which Ender you have, it might fit at a diagonal. The front face part might be the only issue.
Use the yellow frog tape. It’s great at not pulling any paint when you peel it off.
I was just thinking the other day about how it’s been so long since your last full helmet tutorial. Glad they’re back. Also why did you go back to bondo instead of UV resin?
Many people don't follow the proper safety precautions when doing it so I try not to promote it
How many filament rolls for one clone helmet? Just wondering because im looking at making one myself.
Hi, did you put something inside the helmet to wear it ? (For keeping the helmet in place and comfort)
Just bought ur 3d files for this helmet yesterday, and i must say they are perfect.. very satisfied costumer. i think i will buy your visor for this helmet, do u ship to sweden? cheers from sweden!
Hey I was wondering how much money you spent on filament for your boba fett armor?
Can you share your print settings?
Can you clip the front and back of the helmet to put it on and use it as a two piece, instead of fusing the front and back, or will it not stay together just by clipping both pieces while wearing it?
I would like that helmet to use for my motorcycle
What size printer is required to print this? I have an ender 3 v2 and am wondering if the files on the store are small enough to print on it.
Hi Galactic Armoury!
Would it be possible to seperate the black “gasket” from the back part as it’s own file? I was thinking of buying and printing this but I wanted to do the back part in a flexible filament.
Looks sick! I'm currently working on a Mandalorian helmet, trying to get my hands on some Bondo seems to be more difficult than I thought it was gonna be lol, it's out of stock, if you know where I can get some or a good replacement would you mind letting me know?
(The helmet took about 85 hours of printing)
I'm also making the Mandalorian's blaster it's printing rn
(About 8 hour print, it's not a working one, I just wanted to have it so the helmet had something to match with)
I use wood filler to fill my prints, might work for you and isn’t toxic! On my Insta (same as username) you can see my Mando helmet which was done with this method
I have some woodfiller lying around, just normal wood filler?
@@orsom1234 yep just normal wood filler will work, so long as it’s fairly thick
@@atomoworkshop3327 just tried it, sanded down and it's worked thanks, imma have to put another layer of the filler down as I did it a little thin I will do that later tho
@@orsom1234 glad it worked out for you :D
It seems like some leave some of the seams visible and some cover them all. Is it just personal preference?
These pieces have the alignment tabs on them, but the files I just got don't have them. Is this part of a recent update?
Are these the files from your website? When I look at the files on your site it seems that the helmet is only separated in two places. If it is the same please let me know.
Yes it is the same!
This is a thing of beauty - but no offense; I can never let my 12-year-old see this because he will think whatever I craft for his Halloween costume is absolute garbage :(
Could you make me a usable master chief welding helmet with miller clear lens 2.0? I'll gladly pay
I'm still working on my clone commando blaster
Sounds cool how is it going?
@@orsom1234 honestly just Sanding it and spraying prime filler on it right now just getting rid of the 3d lines
Yep that's about 90% of it
Can you make a pilot helmet from Titanfall someday?
Please make helmet from knights of Zakuul from starwars old republic
Make a Revenge of the Sith clone pilot helmet
No-one ever covers the padding.
Hi.
I have a Printvolum of 220 x 220 x 270mm does anyone think it will fit on my 3d printer? :D
I have a 256x256x256 printer and It was too big, I printed it in 3 parts
Have you been hitting the gym? Or all the sanding is making you buff
Little bit of both
Can I get one for free
Your girlfriend must be impressed. oh, wait....
HAHA, step 1: buy 3D printer.
I’d add bluetooth speakers inside that helmet to listen to music.