XVII | Part I Sandcarving Acrylic
Vložit
- čas přidán 13. 09. 2024
- Session XVII - Sandblast Acrylic. Live from the Rayzist Photomask Workshop
Liz Haas demonstrating sandcarving acrylic using photoresist film. Create a smooth etch using your sandblasting system with SR2000 photoresist film.
Recorded July 28, 2020 - Jak na to + styl
I love this job. I did this job for 5 years in Singapore 🇸🇬.
Awesome! Hopefully, you can get back into it on a personal level at some time. It's a great hobby and can be a great money-making business as well!
Thanks for watching!!
Both WD-40 and micro plastics down the drain. Where do you think that stuff ends up?
Thank you for your concern. The WD40 stays on the rag/towel you are cleaning with. No micro plastics... the resist does not go down the drain. We use sink screens to prevent any resist films from going down the drain.
Always essential to be as responsible as possible in your work studio. Great point.
Hey! Sorry for commenting on an old video, but what is the kind of media that you’re blasting? What’s the grit or mesh size?
Hello Chris, don't be sorry...Thank You for watching and for the question; glad to help. In this video, we were using 150 Grit Aluminum Oxide. It is a product we carry if needed. See: Rayzist.com/store
Thanks again for watching!
Can you give an example of a stencil that you make for a customer with the price of that stencil?
Hello Connie, send us your image/graphic (as a PDF) or page of designs. We do have a minimum order for our Custom Mask service of $40.
Example: You can send a single image,
example size:
4" x 5" image and get 9 of those images back for the minimum order...$40
3" x 4" image and get 16 of these images back for the minimum order...$40
or you can send a verity of images (fill up a page, up to 14" x 14") and get 1 page for the minimum order
Custom Mask is priced but the "square inch" of your total image size. Base pricing is $.12 per. sq.inch + an print film $15 (per image layout)
The CM Pricing complete depends on the size and quantity of the image/mask you need back.
see: www.rayzist.com/Film/CustomMask.php
I hope you find this helpful.
do you make 200cm x 200cm cabin for sandblasting how much it cost
Hello, We do not manufacture anything that large as an enclosed blasting system. I would suggest our portable Pressure Pot for work of this size and a blasting environment you can move around in freely, using proper air-feed hood breathing equipment. Or perhaps have a look at the Sandmaster Jr. dustless blasting system w/ the leveling arm option.
See: Portable Pressure Pot
www.rayzist.com/store/Sandcarving_Equipment.php/Sandcarving_Equipment/portable-sandblasting-pressure-pot-pp100x
See: Sandmaster Jr.
www.rayzist.com/store/Sandcarving_Equipment.php/Monument/Sandmaster%20Junior
Why was this a live stream
Hello Maruss, we had a series for about 18 weeks that were LIVE events and were recording simultaneously on our CZcams channel. Thanks for watching!
I really like ur jop
Thank you for your kindness! We appreciate you watching! If we can support your Sandcarving needs please reach out to us at Rayzist.com