Good content! As an older person with hearing loss the music interferes with my ability to hear the presenter. Please consider eliminating the music or mute it while the presenter is talking.
I love watching ur videos - I sure wish there were a set that used LaserGrbl or had LaserGrbl included with outcomes with Light burn - I watch many videos and the last few steps are....add to Light burn and. Love the videos though!!
Power and speed are very depending for different laser power. In my Ortur, i set power 75% and speed 5000. I am not satisfied with the deepness of engraving but, DPI test is good. It would be much better with lower speed but that would increase work time several times, and, i dont have a time.
Can you explain line interval. I saw on the lightburn forum that someone put theirs in Inches instead of MM. I'm wondering if I use a lens from American Photonics for the glass tube C02 laser. I should be able to get more DPI because the beam is smaller. If I keep the line interval the same is that correct or should it be adjusted?
Great video. I downloaded and loaded the Lightburn DPI text pattern. Each of the images in the test pattern have the same settings however. Is this correct? I am new and still learning the ins and outs of ImagR and Lightburn.
Are these instructions exclusive to this particular laser? How do we find the optimal DPI on a Glowforge Pro for example? We can't really set the head/bed height. This is automated. But I would like to know what DPI to enter into my images in Imag-R online when converting images.
For Some strange reason, I cannot get the rulers to cut. The file loads fine in Lightburn but does nothing when I send it to the machine. Using a Thunder 51 w/100W.
@@christianfranz2601 tested and should work. Sure you downloaded with the newest link? I changed it yesterday, probably you downloaded before the change.
The light burn template file only has one cut loaded, is that because each picture has its own preset DPI so do I just have to turn on threshold or create individual DPIs?
Good content! As an older person with hearing loss the music interferes with my ability to hear the presenter. Please consider eliminating the music or mute it while the presenter is talking.
Not all of us can afford a CO2 laser. I would be very useful if you posted projects with diode lasers.
I already bought one. Will arrive soon and then I will start.
Btw all of these videos can be used as well for diodes :)
@@ImagR-Laser Preparing to try with a diode 10w xtool d1 pro as I type!
This was the fastest video I ever saw explaining correctly choosing DPI for laser cut 👍🏻
I like the idea of using a real picture to do the fine tuning since in the end, picture quality is really what matters. Nice job.
Awesome video Luki, thank you! Thanks for making it!
This was an extremely helpful video, thanks so much!
I love watching ur videos - I sure wish there were a set that used LaserGrbl or had LaserGrbl included with outcomes with Light burn - I watch many videos and the last few steps are....add to Light burn and. Love the videos though!!
LOL, Luki, Thank you, You sound like a nice young lady.🤣
I think 282 dpi was better. Great video and ideas, thanks.
Power and speed are very depending for different laser power. In my Ortur, i set power 75% and speed 5000.
I am not satisfied with the deepness of engraving but, DPI test is good.
It would be much better with lower speed but that would increase work time several times, and, i dont have a time.
It would be more useful if you did this with a diode laser. But it's useful for some I guess.
Great Video. Thx for your time and work :)
Why not test higher DPI to insure 318 is in fact the best?
Very helpful. I want to know how to calculate correct step size?
OK....
Now what was the Image mode you used?
Stiki, jarvis, grayscale?..... What?
Thank's for the great vid.
Can you explain line interval. I saw on the lightburn forum that someone put theirs in Inches instead of MM. I'm wondering if I use a lens from American Photonics for the glass tube C02 laser. I should be able to get more DPI because the beam is smaller. If I keep the line interval the same is that correct or should it be adjusted?
Amazing job, may i ask what kind of wood you are using?
Thank you!!!
hi, do you do any settings with the xToolF1, I keep trying but without much success on Slate....
liked and subbed!
No longer had the dpi test opshion
Great video. I downloaded and loaded the Lightburn DPI text pattern. Each of the images in the test pattern have the same settings however. Is this correct? I am new and still learning the ins and outs of ImagR and Lightburn.
Are these instructions exclusive to this particular laser? How do we find the optimal DPI on a Glowforge Pro for example? We can't really set the head/bed height. This is automated. But I would like to know what DPI to enter into my images in Imag-R online when converting images.
For Some strange reason, I cannot get the rulers to cut. The file loads fine in Lightburn but does nothing when I send it to the machine. Using a Thunder 51 w/100W.
Great video, but unfortunately I don't have a c02 laser, I have a sculpfun 10watt diode laser, do have any videos that will suit a diode laser?
i did...the focus is set at the factory and once I tried this I found the focus to be right on!
What speed and power can I use for 80w input/10w output diode laser for dpi test using lightburn
Can the LB test file be sized to fit my pieces of wood, or do they have to be kept the same size?
Since they‘re already dithered you shouldn‘t change the size
what way was the images processed? What type of processing so you can match it with your own photos
I used imag-r.com - kasia algorithm
Hello. the file for rdworks its not working. "File format error! Please check file version." I`m using v8. Any help?
hi i downloaded the files but when i bring them into lightburn it is all one layer no different layers any help would be great
Hello.Do you have any test files for acrylic
yes doesn't open in light burn
If you have downloaded it within the last 2 hours it does. We tested it. It also opened before, but was empty
How many watts the Laser have that you used for the Video ?
80w
can not open the test file help needed please
Can i use the same method for a fiber laser?
same to me: lb-file doesn´t open
Changed the link basically 2 min ago :)
@@ImagR-Laser thanks, but lbrn2 still not working, has only 549kb, greetings from bavaria :-)
@@christianfranz2601 what happens when you try to open it?
absolutely "nothing", no error message, no graphic, nada.. ;-)
@@christianfranz2601 tested and should work. Sure you downloaded with the newest link? I changed it yesterday, probably you downloaded before the change.
Hi, the test files for lightburn do not show anything when imported into lightburn.
Changed the link
could you please check -Testpattern and Images files? Link does not work for me.
What‘s the issue?
@@ImagR-Laser using RDworks (8.01.33) - and got error "File format error! Please check file version."
Noice
is the lightburn file supposed to be pass through?
Yes
The light burn template file only has one cut loaded, is that because each picture has its own preset DPI so do I just have to turn on threshold or create individual DPIs?
Yes
@@ImagR-Laser thank you. Final question, do you have a suggested speed/power to start at for 100W when running this test on slate?
@@matthewgilchrist1068 i would use low power and high speed. Like 10-13% power and 500mm/s
Is the DPI different than lines per cm?
Dpi means dots per inch
and who uses LaserGrbl, how to do?
I don‘t know, never used
where are these files? i cant find them
got it, sorry