How to Replace Valve Cover 2008-2013 Nissan Rogue
Vložit
- čas přidán 11. 05. 2023
- Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ib/1AEVC00097
This video shows you how to install a valve cover on your 2008-2013 Nissan Rogue.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Pry Bar 1aau.to/oRs/1AXAA00020
• 10mm Wrench 1aau.to/oT4/1AXAA00010
• 14mm Wrench 1aau.to/oT4/1AXAA00010
• 10mm Socket 1aau.to/oa5y/1AXAA00017
• 14mm Socket 1aau.to/oboF/1AXAA00015
• 16mm Socket 1aau.to/oboF/1AXAA00015
• 18mm Socket 1aau.to/oady/1AXAA00043
• Air Compressor
• Trim Tool Set 1aau.to/o8e/1AXXX00006
• Needle nose pliers 1aau.to/oCh/1AXAA00051
• Needle nose pliers 1aau.to/oCh/1AXAA00052
• Pliers
• Torque Wrench 1aau.to/oaz8/1AXAA00044
• Block of Wood
• Gloves 1aau.to/oW9/1AXSS00048
• RTV
• Safety Glasses 1aau.to/oQj/1AXAA00343
• Sandpaper
• 5mm Hex Wrench
• Floor Jack 1aau.to/oZX/1AXAA00068
• Rubber Mallet 1aau.to/ogw/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
All this to change a gasket. Trying to figure out how to get this done without a floor jack or half the wrenches he used here lol. Great video, great knowledge, thank you!
Thank you. Saved daughter $750
You are the man, instructor giving professional instructions.. Knowledge is power.. thanks again... My 1st Mechanical job..
My Nissan Rogue says thanks as well.
Have A Great Day!
+TheGospel & TheGame Aman' Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Try changing blower motor on these. Interesting project
Informative step by step procedures, size of screws, and noted caution areas. Thank you for sharing.
Great attention to detail, camera angles, and lighting.
Thank you for this! It went smooth as butter!
Excelent good job greetings from Honduras my friend
Awesome bro
No torque value for any of the fasteners? Not even the valve cover? Great video!
Do you drain the oil before you remove the cover?
Hmmm.... You did not mention the torque spec for the valve cover bolts. What should it be?
Also the old valve cover uses 12 bolts but the new one only uses 10. Is the new part the correct one?
Can you please show a video of fuel injector replacement for a 2016 Nissan Rogue. I cannot find any info anywheres!
@TRQ How long do I have to wait for the RTV sealant to set before I can drive? Thanks
no, pero hay carro complicao en esta vida
Are there torque specs for the valve cover?
Mine has 3 bolts on the bottom how do I make the 3 hole?
Saludos, Dlsb
Hmmm, gonna have to live with the slow leak for now. Doesn’t drip but probably a quart a year.
Doesn't start it afterwards 😕
+@domdomdominoes6128 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
gotta be the dumbest design. good job engineers.
Clearly someone made the mistake of buying a Nissan. All the videos lately are on this pile.
This is a bit ridiculous!
What a rat nest of an engine. I'll just stay with my toyota.
I like tha video good job i see you from to colombia