excellent introduction on Ethercat, especially for me who comes with "IT"/Communication backgroud. speaking about Ferrari, love German guys of making a joke as seriously as telling a truth
What most interesting is etherCAT has two different protocols which share the same lower layers, enables two different mode to run faster mode and conventional TCP/IP mode. Since TCP/IP tools are widely used already so it will greatly contribute lower manufacture cost. Geneous!
Great presentation, I watched to learn the basics and left wanting to implement it on every system I work on :'). I think I get what you are saying about topology and EtherCAT existing "below" Ethernet but seems to good to be true. If i have a ring setup with say EtherCAT Master Port 1>Ethernet IP router P1>Ethernet IP router P2>Stepper drive P1>Stepper Drive P2>EtherCAT master Port 2 will that work?
EtherCAT is a network where you can use one EtherCAT master at a time only. So the network you've described will not work. Please get in contact with techinfo@ethercat.org and let us know your requirements in more detail.
Really great presentation. Is there any link where we can access the presentation? I searched on your website and I wasn't able to find this presentation. Thanks!
Hi Gerfel, you may have to distinguish between configuring an EtherCAT network (which is very simple, as the master typically assigns the addresses automatically) or implementing EtherCAT into your device and configuring the ESC. If you need some support, please get in contact with us at techinfo@ethercat.org!
@@EtherCATGroup Wow! I really appreciate your reply, thank you. I am relatively new to EtherCAT and slightly acquainted with slave devices, mostly LAN9252. I'll definitly contact if I need some support.
Thank you. It's challenging to include all features of EtherCAT within 20 minutes. :) However, you can find more information about EtherCAT P on www.ethercat.org/ethercat-p.
The yawn when looking at EtherNet/IP's 8ms cycle time was savage! Love it
When the Speaker yawns, everybody yawns.
tip, try to use personal mic to avoid the reverb effect
excellent introduction on Ethercat, especially for me who comes with "IT"/Communication backgroud. speaking about Ferrari, love German guys of making a joke as seriously as telling a truth
What most interesting is etherCAT has two different protocols which share the same lower layers, enables two different mode to run faster mode and conventional TCP/IP mode. Since TCP/IP tools are widely used already so it will greatly contribute lower manufacture cost. Geneous!
Great explanation. I love the subtle wit!
Very effective presentation and a great marketing speech. ;-)
I would give it a try on my next plc+motion application.
Great presentation
Great video, simply about complicated!
At 11:02 "UCP" should probably be "UDP" otherwise a great introduction, also like the idea of not administring any more ip addresses /theitguy
@EtherCATGroup Do we need to replace the Ethernet communication modules in both PLC rack and I/O rack or only in the I/O rack to adapt EtherCAT?
Great presentation, I watched to learn the basics and left wanting to implement it on every system I work on :'). I think I get what you are saying about topology and EtherCAT existing "below" Ethernet but seems to good to be true. If i have a ring setup with say
EtherCAT Master Port 1>Ethernet IP router P1>Ethernet IP router P2>Stepper drive P1>Stepper Drive P2>EtherCAT master Port 2 will that work?
EtherCAT is a network where you can use one EtherCAT master at a time only. So the network you've described will not work. Please get in contact with techinfo@ethercat.org and let us know your requirements in more detail.
Can we get the PPT ?!
I saw what you did there with the yawn. Lol!
Great talk! U really raised some interesting points! Thank you
Really great presentation. Is there any link where we can access the presentation? I searched on your website and I wasn't able to find this presentation. Thanks!
Please write to info@ethercat.org and we'll try to help you.
It's nice, Thank you...
Great work, I love it :)
who are the makers of ethercat chips?
HAHA the YAwning XD
#Topology Option Is Best For Troubleshooting while EtherCAT Error...
I am not sure if it's just me, but configuring EtherCAT is relatively difficult for me. Configuring ESC (EtherCAT Slave Controller), for example.
Hi Gerfel, you may have to distinguish between configuring an EtherCAT network (which is very simple, as the master typically assigns the addresses automatically) or implementing EtherCAT into your device and configuring the ESC. If you need some support, please get in contact with us at techinfo@ethercat.org!
@@EtherCATGroup Wow! I really appreciate your reply, thank you. I am relatively new to EtherCAT and slightly acquainted with slave devices, mostly LAN9252. I'll definitly contact if I need some support.
Very Good Presentation But Why Not Explained About EtherCAT Cable Connections(24VDc/RJ45) 4Wires?
Thank you. It's challenging to include all features of EtherCAT within 20 minutes. :) However, you can find more information about EtherCAT P on www.ethercat.org/ethercat-p.
@@EtherCATGroup okay sir... thank you... you're doing good job...Best wishes to your Team...
EtherCAT is obsolete?