how to remove rubber print from t shirt at home
Vložit
- čas přidán 11. 05. 2019
- #MrNams Share, Support, Subscribe!!!
Subscribe: goo.gl/mqbdai
Facebook: / mrnamsofficial
Twitter: / mrnams
Hello friends,
Hope you all doing well!
In this video we will learn to remove rubber print from t-shirt at home.
Step 1, Put the t-shirt on a table with the printing to be removed facing up.
Step 2, Place a wet cloth over the printing.
Step 3, Iron the wet cloth to melt and loosen the printing.
Continue applying the heat of the iron until the printing has melted sufficiently.
Step 4, Work at the melted printing, remove it whatever melted from the T-shirt.
Please repeat step 2 to step 4, unless all printing melted and removed completely from T-shirt.
See, we have successfully removed rubber print from t-shirt.
THANKS FOR WATCHING.
If you enjoyed video, please do like, share and comment.
Please SUBSCRIBE to follow new Uploads goo.gl/mqbdai
WARNING:
Always be safe, everything you do is at YOUR OWN RISK!
I shall not be liable for any injuries, loss or damages claimed to be caused by watching the contents either.
#MrNams #mrnamsofficial #instagram
#reels
#instagood
#craft - Věda a technologie
*Click below link to subscribe,it's absolutely free.*
*goo.gl/mqbdai*
*सब्सक्राइब करण्यासाठी वरील लिंकवर क्लिक करा,ते पूर्णपणे मोफत आहे.*
*सब्सक्राइब करने के लिए ऊपर दिए गए लिंक पर क्लिक करें, यह बिल्कुल फ्री है|*
)HTC
*The voice makes me laugh so hard that I can't pay attention to the video-*
ha ha ha
Whats the fuck is soo funny ??
ikr it remind me of the dude reading redit memes loooolw
@@bilalnure6252 shut up
lol
I hate this especially when it’s a double sided shirt and there’s print on the inside that gets stuck to you the whole time you have the shirt on
i put hand sanitizer (alcohol based) and waited 5 minutes and scratched it off
Ohh really? Thats best then
But hand sanitizer is so expensive
Shush It yep
weird enough it actually worked
I can’t get hand sensitiser now cause of covid19😂😂😂
I wish I discovered this before I ripped the hoodie 😭
damn
Do hoodies use rubber print or vinyl
@@Skiana 1 we
you’re in luck,ripped clothes are now in style
@@user-jg1yy7mb4i АХПВОАВ
My mom got me a perfectly good shirt with a unicorn sticker on it😭
Dffffffff😹😹
@@kkriisa2869 lil wayne is dope tho
@@kkriisa2869 lmfao same but it his face 🤣
Mine a beautiful short with Punma(stitch image) that is copycat of Puma brand😭
It's better if you washed it in cold water then put it in the laundry dryer. It peels off the paint and the glue gets washed away.
Wait how can that work then I would be ruining all of my tshirts with prints. I have to wash them. I am confused
just dont put it in the dryer if its soaking in water XD
my towel started sizzling
my first instinct was bleach. did not work. now my room smells toxic lol
im making a belphie cosplay. im making his shirt from a instant ramen shirt. thanks 4 posting dude
Have fun!
Oh my gosh, belphie from obey me? I love him
subscribed after seeing u replied almost everyone's comments
Thanks, yes I try to reply almost all comments.
Your video was way better than the first video I saw that was similar to what your doing. I also like the fact that there is someone or something talking and explaining what your doing but peeling it off by hand, you have to have patients to do that and that is something I do not have. LOL but I still loved the video.
😀😀😀
i ended up stretching out my tshirt.
sorry to hear, is it because of over heating ?
MrNams i guess 🤷🏽♀️
Just wash it with water and soap for 5 min and then don’t dry it yet , go and peel it very easily
didn't work for me.
You really got to love a t-shirt to go through the peeling session!! I will be shopping for a nice patch to cover it instead. (But as for the one featured in the video, LET IT GO, good will it for christ sake lol)
I have perfectly fine nike tennis shirt with one of my favorite design, but only the logo is worn out. Why should i throw 80€ shirt away? Everyone has their own reasons and recycling is in fashion nowdays.
Nah. I got a brand new vest that just has a stupid print on the back. Maybe I should cover instead of removing print, but no way I will goodwill right now. It's literally new.
This is helpful, thanks
Glad it was helpful!
All he had to do is, heat up a regular old iron and put it inside the shirt and heat the back side of the sticker and it would peel right off.
yes
So like the t shirt would be inside out?
Could you detail exactly how?
I don't wanna do it wrong and mess up my white t shirt.
Thanks
heat transfer vinyl or dark paper
not a screen printed
Good point!
Yo can you help me out?!!
There is a weird rubber print on my hoodie and I can’t get it off with your steps, it’s a different print material do you know what it is and how I could get it away?!?!
Sorry,I don't have idea, how to remove material you are saying?.
I request all other viewers, can you please share if you have any idea?
try acetone or isopropyl alcohol
Put a nice patch over it :)
works thank you❤
You're welcome!
you know when you take the print off but you can see where the print used to be what should i do to not make that seen
It gets vanished after few days i mean after few Laundry.
it’s working i just try it 👍🏻👍🏻
Great 👍
can this work for a facemask? my husband got one from work and it's the only one that fits me but it has their logo and I dont want it on it.
It should work, please try and share your experience for all
Oh yesss i wanna do the same thing
Did u try this out ???
Hey wear it inside out bruh😸
Can you like wet the shirt with the rubber and place a dry piece fabric on top? Would it be more effective?
I think it is more efficient than repeating again and again...
Good, lets do that and share your experience for us.
Thanks.for this
Enjoy
will it work if my hoodie is 65% cotton and 35% polyester?
I am not sure, can anyone please respond.
Will it work if I had crab for dinner
Does this work on a jeans jacket too?
Sorry, i too dont have idea of this? I request other viewers to respond you.
Only sports cloth ka nikalta h...
My cat ran away hearing this voice 🎃
ha ha ha ha ha
@@MrNams LOL!
How long have you got?
i bought a cool red hoodie not knowing a huge BIEBER was on the back...
Does it work on adidas pants?
Only if print is rubber print.
SAME I HAVE A RLLY COMFY A
PAIR OF ADIDAS PANTS BUT THEY HAVE A DUMB NEON “ADIDAS” PRINT DOWN THE LEG ITS SO ANNOYING
How to remove mark tho?
After two-three wash mark get vanished.
@@MrNams tysm
Ear Tong did it work?
Buy a new one
Thank sir
I'll do this to the t-shirts given by politician. ☺
😁😁😁😁
Biden/Harris tee shirts!
Hi, Does this also work on jackets?
Not sure, but I feel It should work. Other viewers please share your thoughts.
I don’t see why it wouldn’t work. If it’s made of the same material, I’m sure it would be fine
How do you remove the glue left behind?
It will vanish after 2-3 wash
That’s too hard a work son when you been fishing all day!
Can we use hairdryer to be more careful
I wont recommend
@@MrNams ☹️
We cant control region using hair dryer
Guys this only works on bad quality prints i got a shirt with a really good quality one I ended cutting the shirt instead of removing the print and I did try both acetone and iron but nothing worked 😟🙏🏻
Sorry to hear
Would white spirit work?
No idea, if anyone know please share.
got a sweater that has written "Cowgirl" in it even im a guy
And it's a miracle after 5 hours of nibbling
Glad it was helpful!
I thought it's gonna peel it self
Would this work for a hat
It should, if it's rubber print.
heat back of print to easy remove
Thanks po
Nice... Should only take 2 hrs 😂
🤣🤣🤣🤣
this is v time consuming tho right
yes
how about the rest stain how to remove that?
stains will disappear after few wash
MrNams I try to use nail polish to rub it on my cotton clothes but it still
the most fast way : buy another one without any print.
:D
I have 2 new company sweaters and they both have a huge logo on the back rigt above the right ass cheek. Everyone hates it. And i think i will try this
Yes please try
@@MrNams i tried. but unfortuneately the print is thick and very high quality although ugly. so it didn't work. i will try acetone, rubbing alcohol and sticker remover see wich one works.
Thanks for update, it will definitely help to others
How to remove the glue mark after removing the print?
It will vanish after 2-3wash
pano naman po pag natatanggal na ung print pano po sya idikit ulit?
I tried mine but I couldn't believe what happened 😢 my cloth ended up burning which made me sad and I teared all of it and threw away and imagine it was a new one
OMG, sorry to hear that, guys do it patiently
this is bullshit.. The print is actually on even harder now. thank you.
Sorry to hear this
@@MrNams Me too. 250 euros work pants i cannot use in my new job becasue it has another company logo on them :(
اكو عربي
):
هلا
But what if its newly printed?
You can remove it.
@@MrNams using the tactics you showed?
Yes, also there are few other tricks too,i am not remembering exact who mentioned those, can you please go through comments.
@@MrNams ohh thankyou for the advice, ill try those tomm
I'm here because my mama gave me a jacket full of 'I ❤️ mama' on it. I love my mama but I just want to remove it but it seems i got a lot of work to do 😐
Did it work?
@@MrNams Unfortunately, no. I tried to do all your steps but still can't remove it
so its either not rubber print or high quality print, if you sure its rubber print, and want remove anyway, then you can put iron directly, so that print get attached to iron then remove it from other cloth or blade.
@@MrNams thanks!
You could also never wear it lol - just when you visit your mother :p
Or you could print her a jacket with your face all over it lol - see if she'll like it
I already follow all the steps and it not worked but im sure it's rubber print
As i already told,if you sure its rubber print, and want remove anyway, then you can put iron directly, so that print get attached to iron then remove it from other cloth or blade.
Didn't worked for mine but it's not exactly same type so go figure
Try by increasing iron temperature, if not you can remove cloth and directly use iron, you may need to clean iron later when logo stick with iron. best luck
Try to acetone
Can’t you just put the iron straight on the plastic ?
We can, but carefully. Need to clean iron after each time we put it on logo.
and melt the print onto the iron and all over the shirt...?
It'll melt on the iron
I typed in “how to remove print from a shirt” on google and I’m disappointed this is 2nd video that popped up
:D
wanted to take my deadname off my grad hoodie
😀
Didn't work for me
Sorry to hear
Abe T- shirt kaharab ho gyi re baba 😂
🤣sorry to hear, guys please take proper care.
Just move on and buy a new shirt. Too much work
Agree, that depend on cost and quality T shirt, if its costly then ok to do these stuff
Bruhhh its so hard that my t shirt almost messed off
Ohh sorry to hear it. Do it carefully.
LMAO
Lol
😁🤣
That was totallyyy unsuccessful methoddd!!!!!!!!! 😑😑
ohhh sorry to hear
how nice.. it looks like shit :D
You are Not successful remove anything,?
Sorry to hear it
Ni it doesn't work guys.
Sorry to hear that.
Flop
Sorry to hear.
@@MrNams ☹️
its not workıng
sorry to hear that
بارك الله فيكم انتبهوا من الموسيقى لأنها ذنوب جارية