There is different thingy for your bars that makes it low beam ... I have no idea what it is called that’s how I ended up here . Pa mine came with a plug to plug straight in
Right.... But it is the top plate that has control of the angle of the lamp. Also, I purchased the Exact Same 48W LED spot work light from eBay for $9.88 delivered to my door. I had an old plastic light visor ... SO I made my own 48watt lamp for less than $10. LOL
YES, HaHa.. I also purchased the Exact Same 48W LED spot work light from eBay for $9.88 delivered to my door. I had an old plastic light visor ... SO I made my own 48watt lamp for less than $10. LOL
@@renegoudreau8578 I got one just like this.. Make Sure it is the thick one with all aluminum housing. There are some cheap smaller, thinner ones made of Plastic.. The one I have is a Fabulous light that runs on 12 VDC...
Inspired me to order one, looks good! Thanks for the video
Great Video, pleased you mentioned the wiring the instructions just leave that out. Fitted mine to high beam also. 👍
Thank you for stating the electrical (brown/blue) because mine came with the Pos+Neg in the wrong slots on the connector
Thanks for sharing this! 👍🏻
Just hooked one of these up to my Ktm 2013 xc150, when I rev throttle the light dimmed so I hooked up a capacitor and all is good
What compactor did you use?
Good vid. Was just about to buy a Baja.
So you did not need a rectifier at all?
Hi plugged mine in and nothing comes on ktm 500 2018 .. any suggestions 🤔?
Can i use this light on the road?
There is different thingy for your bars that makes it low beam ... I have no idea what it is called that’s how I ended up here . Pa mine came with a plug to plug straight in
No rectifier required if efi bike.
When adjusting the pitch of the light. There is an adjuster option at the bottom of the light mount. This might only be on the latest release??
Right.... But it is the top plate that has control of the angle of the lamp. Also, I purchased the Exact Same 48W LED spot work light from eBay for $9.88 delivered to my door. I had an old plastic light visor ... SO I made my own 48watt lamp for less than $10. LOL
@@crazybob1954mo good to know there are cheap replacements if the LED part fails.
hi. I have 2018 KTM 500 exc-f US version, will it fit my motorcycle? my model not mentioned on the box. Thank you!
They have this for your bike bro. Google it homie
why couldn't I put it on a 125?
doesn't a ktm 125 generate enought tension or something like that?
Does it have high beam and low beam ????
No, there is a "dimmer" kit available at Slavens, and taco moto.
I did mine the same way. Low beam light is off. High beam light is on
hello friend. mine is flickering all the time and it is anooying, when i give gas its not
. do you have any solution?? i have exc 300 2017. carb
Thats because your bike is making AC not DC .. go on ebay you can buy AC to DC converter
You need to buy a full wave bridge rectifier for @ $3.00 from eBay to rectify the AC voltage to DC.
The cheap version is to use an LED bulb to replace the original one.
YES, HaHa.. I also purchased the Exact Same 48W LED spot work light from eBay for $9.88 delivered to my door. I had an old plastic light visor ... SO I made my own 48watt lamp for less than $10. LOL
@@crazybob1954mo what bulb did you order?
@@renegoudreau8578 I got one just like this.. Make Sure it is the thick one with all aluminum housing.
There are some cheap smaller, thinner ones made of Plastic.. The one I have is a Fabulous light that runs on 12 VDC...
@@renegoudreau8578 Good Luck.... OK...
@@crazybob1954mo true, having WR450,want to ride offroad at night..should get a good quality led bulp, wish acerbis make same for wr450..
A chair bi.