DIY Angle Grinder Rack Stand
Vložit
- čas přidán 31. 05. 2024
- Here's a simple angle grinder stand that I made out of a rotor, an axle shaft, and some scrap metal.
Disclaimer: The following disclaimer applies to The BFH Garage CZcams channel (referred to as "the Channel"). By accessing or using the Channel, you acknowledge and agree to the terms and conditions of this disclaimer. If you do not agree with these terms, please refrain from accessing or viewing the Channel.
Content: The Channel provides automotive-related content, including but not limited to repair guides, maintenance tips, product reviews, and general information. The information presented on the Channel is based on the personal opinions and experiences of the Channel's creator and contributors. However, the Channel makes no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the information, products, or services mentioned. The content is provided for informational and entertainment purposes only and should not be considered professional advice.
Personal Responsibility: The Channel encourages responsible automotive practices. However, any actions or decisions you take based on the information provided on the Channel are solely your responsibility. The Channel cannot be held liable for any damages, injuries, or losses that may occur as a result of following or implementing any information or advice presented on the Channel. Always exercise caution, consult professionals, and adhere to safety guidelines when working on or modifying vehicles.
Third-Party Content and Links: The Channel may include links to third-party websites, products, or services. These links are provided for convenience and informational purposes only. The Channel does not endorse or have control over the content, products, or services offered by third parties. Accessing or using third-party content is at your own risk, and the Channel shall not be responsible for any damages, losses, or issues arising from such content.
Intellectual Property: All intellectual property rights, including copyrights, trademarks, and any other proprietary rights, in and to the Channel's content (including videos, images, graphics, logos, and text) are owned by or licensed to the Channel. You may not reproduce, distribute, modify, display, perform, or otherwise use any content from the Channel without obtaining prior written consent from the Channel.
Changes to the Disclaimer: The Channel reserves the right to modify, update, or change this disclaimer at any time without prior notice. It is your responsibility to review this disclaimer periodically for any changes. Your continued use of the Channel after modifications to this disclaimer will constitute your acknowledgment and acceptance of the modified terms.
Governing Law: This disclaimer shall be governed by and construed in accordance with the laws of the jurisdiction in which the Channel operates. Any disputes arising out of or in connection with this disclaimer shall be subject to the exclusive jurisdiction of the courts in that jurisdiction.
If you have any questions or concerns regarding this disclaimer, please contact us through the appropriate channels provided on the Channel.
Last updated: May 11, 2023 - Jak na to + styl
Love the old keep grills on the wall
That towel dispenser is ridiculously exactly what I need
I'm telling you, the more I use it the more I realize how much I like it. It's light enough to move around but heavy enough to have a towel tear off without it falling over. That's really important for when your other hand is full or in use.
And hopefully never misplace it@@TheBFHGarage
That is very good idea you did a very nice job I'm going to change my rack now
"Finally finished the project, and IT IS AWESOME." Nice job Mike. That tool chest looks awesome tool. Nice find.
Nicely done, I made a bench grinder stand sort of like that with a semi truck cast iron drum brake. Very moveable yet stable.
nice build
A piece of art nice work Mike.
Dammit I JUST THREW OUT my old axles. Great idea.
Genius
Looks great. Really like the cleanliness!
Thanks for the compliment! It has been great on my welding table!
@@TheBFHGarage the axle shaft paper towel holder is a good idea. I see your content on TJ Forum also.
Great job but, for the love of your sanity please put some felt on the bottom side of those things lol