How to Fix Oil Leakage Problem from Clutch Arm YBR 125| Clutch Arm Oil Seal Change YBR YBZ TTR CRUX
Vložit
- čas přidán 25. 08. 2024
- Assalamualykum Friends! you are watching my channel life hacks. In this video i will show you how to fix oil leakage problem from clutch arm leber or clutch pushing lever of yamaha bike ybr ybz ttr crux 125 at home.
yamaha ybr bike k clutch arm say oil leakage ko kesay thek karain.
ybr k clutch arm ki oil seal ko keasay badlain
how to replace clutch arm and oil seal of ybr crux ytz ybz 125
1-How to Fix Oil Leakage Problem in Yamaha YBR 125| YBZ 125 k head say oil leakage kesay thek karain.
• YBR Head Oil Leakage P...
2-Yamaha YBZ YBR 125 Bike Won't Starting Even No Compression No Power|Bike Kick Loose Problem Solution
• How to Change YBR Pist...
3-How to make clutch smooth and soft Yamaha YBZ 125|Bike k clutch ko smooth aur soft kesay banain.
• How to Make Clutch Smo...
4-How to Adjust Clutch Setting Yamha YBR 125 YBZ & YBR 125G yamaha bike ki clutch setting kesay karain
• How to Adjust Clutch S...
5-How to Change/Install/Replace Clutch Plates and Clutch Box For Yamaha YBR 125 YBZ 125 and YB DX-125
• How to Change Clutch P...
6-How to Install Magnet Springs and One Way Bearing in Yamaha YBR 125 | Bike One Way Bearing Fitting
• How to Install Magnet ...
7-Open Self Start Motor YAMAHA YBR |YBR ki self start motor ko kesa open karay|Repair Self Start Motor
• Open Self Start Motor ...
8-YBR Kick Shaft Timing Setting |YBR 125 Kick Spring Timing | Kick Return Problem | Kick Loose Problem
• YBR Kick Shaft Timing ...
9- How to Make YAMAHA YBR YBZ TTR 125 Shocks Absorber Bolt Holder/Puller-T at Home in Just 100 Rupees
• How to Make YAMAHA YBR...
10-Installing clutch wire of YBR 125 at Home | Replacing clutch wire of YBR | Changing clutch cable YBR
• Replacing clutch wire ...
11-Open Front Wheel of YBR | Change Mudguard of YBR 125cc | Remove Front Wheel Brake Hub of YAMAHA YBR
• How to open Front Whee...
12-Change YBR Shocks Oil Sea At Home|How to Replace Oil Seal of YBR Shocks|Shock Fork Seal Replacement
• Change YBR Shocks Oil ...
#lifehacks
#yamahaybr125
#yamahaybz125
#yamahacrux125
#ttr125
#Crux125
#STX125
#oilsealproblem
#yamahaclutchsealchange
#yamahabikeclutchpushingleversealchange
#ybrclutcharmreplace
#ybr
#yamahattr125
#yamahabike125
#fixingoilleakageproblemfromybrclucharm
#clutcharmoilsealchangettr
#clutcharmoilsealchangeybz
#bikeclutchspringchange
#bikekickshaftspringreplacement
bike ki kick k spring ko badalna ka tarika
ybr bike kick shaft spring replacement method
kick shaft spring changing method
ybr ki kick k spring ko change karna ka tarika
Best chenal 😊
Great thanks 👍
Thank you for your solution video my dr friend😊❤🎉
You welcome brother ❣️
Finally i got my problem solution in your video❤❤❤
Glad to know.. thanks for your feedback ❤️
Nice
Thanks
Very nice video ❤❤❤
Thanks for your kindness ❤️
The best 👍👍👍💯❤️ video bro her Tara ky fault kr video bano
Thanks bro for your motivational feedback. ❤️
Yamaha gladiator ss125 ki sil mil jaygi
Yes you can get from your local market.
Its same as r15 v2 ??
No sir it is different than ybr.
Amazing
Thanks sir
Good video bro
Seal ke number kya h & lockal shop sey mil gay gi matlab kisi ar bike ki lag jati h?
Seal number 30.40.10.5 while price is vary. You can buy from local market and yamaha showroom.
Kisi aur bike ki nhi lagay gi. Sirf ybr ki apni hi lagay gi price normal 200 say 300 tuk ho skti ha
Ybr 125 ka clutch box alter ka be terqa batao
Is it needed to open clutch side?
Yes without opening clutch cover side you can't able to remove clutch arm lever.
How do you know if it's tight enough on the centre of clutch? I'm currently replacing the clutch in mine and can't seem to get the plates to push apart. Does the middle screw need to be tight again the clutch plug from the idle position if the lever so it starts moving the plates apart as soon as you start pressing it?
czcams.com/video/XqWNrH2szZA/video.htmlsi=NxLFNMucxEEnNbhn
Watch this video and make sure have you installed back the tiny bearing ball in the centre of clutch rode before installing the clutch plate. Without installing this metal ball clutch can't move even proper fitting.
Thanks for reply. Haven't touched to clutch rod yet because I was just checking if the centre screw of clutch had to be tightened inward until Its touching the clutch rod in it's idle position. I've connected everything and replaced everything carefully just can't seem to get clutch lever to do anything no matter how much I tighten it
Price of seal?
100 rupees