The laptop has an NVIDIA Quadro K1100M graphics card, which is old and no longer made. The smooth rotation of the view is facilitated by use of a 3DConnexion SpaceMouse.
Change the Solution Information details from Force Convergence to Solver Output. Read the error in the output. There are many reasons for convergence to fail and many errors are resolved by improving the mesh. For example distorted element errors. Some errors are not resolved by improving the mesh. For example, deformation exceeds limits, which is resolved by changing from force input to displacement input.
Hello, Sir i am having some issues regarding convergence while performing transient analysis on my model with a non linear contact. Is it possible that you can help me..
Graphics was so smooth. What GPU you are using in this system?
The laptop has an NVIDIA Quadro K1100M graphics card, which is old and no longer made.
The smooth rotation of the view is facilitated by use of a 3DConnexion SpaceMouse.
how we decide for every convergence problem is with meshing. Why not other parameters. would please comment back. Thanks
Change the Solution Information details from Force Convergence to Solver Output. Read the error in the output. There are many reasons for convergence to fail and many errors are resolved by improving the mesh. For example distorted element errors. Some errors are not resolved by improving the mesh. For example, deformation exceeds limits, which is resolved by changing from force input to displacement input.
@@ansysfeaexamples9351 thanks for your kind reply
for hyperelastic material
@@ansysfeaexamples9351 Hello how did you go from force input to displacement
Low voice even if we increase the volume
Hello,
Sir i am having some issues regarding convergence while performing transient analysis on my model with a non linear contact.
Is it possible that you can help me..
Join forum.ansys.com/ and ask a question in the Structural category.