OBS Chevy truck quad corner LED lights & Black Rust-Oleum Automotive Trim & Bumper Matte Spray Paint
Vložit
- čas přidán 27. 08. 2024
- Welcome to another episode of this old hooptie :)
Subscribe to the channel and follow the build!
In this video I refinish the window trim with Rust oleum trim and bumper spray paint then unbox and install new quad led sidelight turn signals on my 1992 c1500 OBS Silverado. Everything used in the video can be found down below.
Thank for tuning in!
Build what you love and love what you build.
The Rustoleum was mixed 4 parts paint / 2 parts acetone / 2oz Majic catalyst. The pieces came out great.
If you plan on doing something similar, test something small first to learn your recoat and dry times for the products you choose. Your local temp and humidity will effect your project. :)
During this project I will try to stick with built not bought. As an Amazon Associate I earn from qualifying purchases.
Under no circumstance should you take any of the information in this video as advice or instruction. I am not a professional. This channel is for entertainment purposes only! Do not do what I do, you could grow a third nipple or permanently damage your chakra. The way I do things may be completely incorrect or dangerous. If you do not know what your doing you should consult a professional to complete or provide proper instruction on any project you choose to take on. I am not responsible for any injury or destruction of property. RESEARCH everything prior to starting your project. You read to the end here is a digital cookie :)
Don't forget to Like, Subscribe, and Share!
The products I used in this video are below.
I may earn commissions for purchases made through the links below.
GemPro LED Corner Lights Side Marker Signal Lamps for Chevy C/K 1500 2500 3500 1994-1998 C10 Pickup Truck Silverado Suburban Tahoe Front Grill Lights, 4PCS (Smoked Len)
amzn.to/3Bf5Oiw
Spec-D Tuning LED Halo Chrome Housing Clear Lens Projector Headlights Compatible with 1988-1998 Chevy/GMC C10 Pickup, C/K, Sierra, Silverado, Yukon, Suburban,Tahoe Left + Right Pair Headlamps Assembly
amzn.to/3wC9XwW
Rust-Oleum Black BlackRust-Oleum Automotive 251574 11-Ounce Trim and Bumper Spray, Matte, 11 Ounce (Pack of 1), Fl Oz
amzn.to/3PPDqax
Didspade 2oz Purp-Fection 0.008 Purple Micro Metal Flake
amzn.to/3vfGfZL
Black Rustoleum paint 1 gallon
amzn.to/3v4045O
Majic 30679 Accelerator Hardener, 1/2 pint, Clear
amzn.to/3Q3W5jR
Speedokote smr 1150 clearcoat
"Get the right activator for your local temperature!"
amzn.to/3argR9B
Kleanstrip Prep-All Wax & Grease Remover, Gallon
amzn.to/3Fv93ls
Fuji 2805-T75G Mini-Mite 5 - T75G Gravity HVLP Spray System
amzn.to/2YGOe5x
Fuji Air Cap Set 5100-2,4,5 and 6 for T-Series Spray Gun with 5137 Carrying Case Bundle (5 Items)
amzn.to/3BxuUWV
Sidemarkers are an awesome addition for sure. I need to stop being lazy and paint the trim on my truck as well. What a difference!
Oh yeah 👍 in the grand scheme of things the trim is an easy fix if they are not ripped up. Cheap too, it was under $25 including paint, paper and tape.
The BADDEST corner LEDs I’ve Seen
I agree, the only thing that would make them better is being sequential like the new mustangs. Alittle extra bling. 👍
I’ve seen them sequential on utube somewhere but they might have been custom I never got led in front because of that hyper flash I have them in rear replaced flasher how did u fix hyper flash anyway looks great really clean!
Thanks 😁 Look up using a resister to stop hyperflashing leds. That should get you fixed up. I would love the sequential look. Probly have to make them one day when I have time. 👍
you helped me alot
my inside of truck went from terrible to actually looking real nice
next im getting another bed for truck then work on body to paint it
Enjoy the process and the outcome 👍
I really like how the truck is coming along. Nice work
Thank you👍 lots more to come. Still have the ls swap, the air suspension, and the flake paint final version. Once I my s10 is drivable I will be swapping back to the c1500.
That was nice, the sidemarkers looks awesome 👍
Thanks bro 👍
I just got done with my grille last weekend, converted to a 94-98 style grille, had to purchase two new inner bumper brackets, but it gave me the chance to take everything down and paint the brackets, tow hooks, nuts n bolts. Been waiting to put this grille on for a few months now, and like you I had to add some extra special custom attachment locations lol. I was very happy with the results, but boy lemme tell you... mine is very annoying to remove - already had to remove once to reinstall the bumper, but she looks great! I have an extra set up upper ball joints from Kryptonite that should fit one of your two OBS's btw, if you plan on making a video on changing out your suspension/steering parts on your front end let me know. I haven't been able to sell em on Ebay and they weren't that expensive but if you want em I'll send em to ya. They didn't fit on my K2500 due to the different bolt pattern and angle.
Thanks bro appreciate that. Ill keep it in mind, I need to figure out if I'm swapping the engine or doing the bags first. My son wants me to take him to school in it so may do the bags first its faster still debating in my mind. I've dug in deep on the s10 wiring and made some progress. I will have a video out on that later this week. As for the grill I feel your pain. 4 times in the last 7 days have pulled the grill and put it back. 2 in one day last week when could not make up my mind on the temp side lights 🤣
I'm hoping mine comes out just as nice. Looks great. I got a few progress video of mine on the Channel. Keep up the good work
Your shop has some sweet projects. Love that c10 👍
@@thisoldhooptie thank you always wanted to do a black truck but hate the maintenance u wash them once and game over. I have 2 color in mine for my 89 stepside charcoal gray or blue
@@sebolloobs6665 very true, it gets very dirty sitting in my driveway after a week or two. This was just to have it all one color while I work on my s10. Once I can drive the s10 I'm doing the suspension, ls swap and a metal flake job again on the c1500. I have enjoyed the black though its a nice look.
Beautiful obs we’re you find the chrome trim interior I love it I have 1990
They now remake most of these billet pieces. cunninghammachine.com/chevy-and-gmc/obs-1988-1998/
Thank you sir
@@criaderoeltacuachecuhpurot3836 No problem, good luck with your project 👍
The side corner lenses should not hyper flash I've had a set should go in a sequence
Mine don't hyper flash, and they are not sequential. I will eventually get or make a set for the fro t and back. I really wanted the sequential leds like the mustang tail light turn signals.
Truck looks nice,thanks for the tip on trim mine looks faded real bad,paint looks amazing,how soon till you get to the rear end.
Thank you 👍I'm just making sure my tahoe is a solid driver so I can either start the ls swap or install the new suspension on this truck. If I start on the ls swap I will paint the bed then reinstall it to save space. I should have things figured out this week.
Looks good
Thank you 👍
@@thisoldhooptie beautiful truck 👍🏻 u plan on ls swapping it in the future?
@@kriswoodall6435 Thank you, yes I have a second 5.3 in the garage. Same setup thats in my s10 in the background. Also have a full air ride going on the black truck this year too.
@@thisoldhooptie that’s nice it already looks badass but with the air ride you’re gonna be turning some heads 🤟🏻
@@kriswoodall6435 Im enjoying the journey. 👍
To remove over spray on the windows use 0000 steel wool it works the best walmart has it or home depot , Lowes. Just don't use it on tint
Thank you for taking the time to leave a tip, happy holidays 👍
Where did you order your bumper from and did you have to do some mods? Your truck has comes a long ways from last video I saw
Thank you 👍little by little, it will get there. Here is the link to the front bumper on summitracings website. It's just cleaned up then sprayed with rustoleum black with hardner added. www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjpltXd56-CAxWZsVoFHc3LDaQYABALGgJ2dQ&ase=2&gclid=Cj0KCQiAuqKqBhDxARIsAFZELmI5m2OSsBx4VaIrEg1ot4kiE7idF9-3N8DnQj_FzJd40lJKwONoZWUaAuLcEALw_wcB&sph=&ohost=www.google.com&cid=CAESVuD2CdcjoOlZ3qhRm-tzEe9D0QS01MDp0TFCnvx6ixh8ICpEIFO02fyu0OWOAP0APMj1Vx_LgsVKcdoX-fEkEysRlaL1XfNYXXDLSHa2UU8swfkoDdCv&sig=AOD64_1Kh0znve5kmP6U8AfWumqQ5Hw1YQ&ctype=5&q=&nis=6&ved=2ahUKEwiNpcrd56-CAxVknYQIHVBWDsgQwg8oAHoECAcQIA&adurl=
Bro where did you find that chrome bowtie Chevy emblem for the front grille. I cant find one anywhere and my OEM Gold looks like crap
Ebay. Search for billet chevy bowtie with your year grill. 👍
Black shoe polish works better,and no over spray! Applies with foam applicator
Thanks for the tip 👍
What headlights are you using?
They are listed in the description under the corner lights. I would definitely check that the seal is good on the headlights. If not, grab a tube of clear silcone and seal the whole front piece. I have not had moisture issues. Others have and mentioned that to me. Good luck with your project 👍
doing mine tmmrow that looks awsome i got my paint yesterday from amazone i used your link the paper you said u got it at home depot?? does it have tape on it??
Yes, its in the tape isle just below the masking tape. They have thick and thin I used the thin never had it bleed.
Good luck with your project 👍
the paper you said u got it at home depot?? does it have tape on it??
Yes it does and yes it was from home depot in the tape and glue isle of the paint section.
Where did you get the hardware pigtails for the headlights?
They came with the headlights. Info on everything i used is in the description. 👍
How did you wire the halo lights and turn signals together? What was the step?
I spliced the only the halo wires from the headlight into the lower turn signal harness wire. The best way is to solder them together. You could yellow but connectors just be sure to add heat shrink over them to keep water tight.
I spliced the only the halo wires from the headlight into the lower turn signal harness wire. The best way is to solder them together. You could yellow but connectors just be sure to add heat shrink over them to keep water tight.
Hello dude!!!
Where did you buy the secuentials corner lights?
Link is in the description for this video👍
Where did you get those billet dash pieces?
Some are original from the 90s others were from amazon and eBay. Search for c1500 billet dash and see what pops up. Also Jeremy over at Cunningham machine is remaking many pieces look him up at the website Cunninghammachine.com or on the Facebook obs chevy truck forums.
I need a driver's side door