5 SIMPLE AXE UPGRADES 2
Vložit
- čas přidán 26. 02. 2016
- Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.com/wranglerstar
-Radios Made Easy - radiomadeeasy.com/product/wra...
-Amsoil - www.amsoil.com/c/products/1/?...
-GoDark Bags - godarkbags.com/#cody411
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com/r.cfm?b=228804...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystems.com/wranglerstar
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar - Jak na to + styl
I don't know if I'm the only one but this guy's enthusiasm for this stuff is completely infectious. Sitting here in an apartment in Memphis some 500 miles away from my old man's home and all of our tools I want to refinish our maul handle with my Esee. Keep it up man, you obviously love what you do.
Right on, Bro! A year later; have you refinished it yet??
Hehehe. Yeah, same here. Used to woodcraft, build etc. with my grandpa in my teens and early twens a lot. We were more "practical" about things and not as enthusiastic as Wranglerstar here though. Eversince may grandpa died, the workshop and property kind of went to shit. I get called in from time to time if things really need to get done but for the most part I shy away because I am "too busy". This video makes me nostalgic as hell and I wish I wasn't trapped in my stupid city life several hours away from it all. One thing is for sure though: I will finally rehandle that one axe that has been wobbly for years now. ;)
A note on linseed: You can just go oldschool and use regular, unprocessed (nutritional) linseed oil without petroleum additives. As he mentions for unboiled linseed oil already, it will take a lot longer to dry and harden out and you may even want to soak the wood in it for like a week (capped PVC tubes are great for this) because it does not penetrate the wood as well. But it smells a lot better, you can get it all over you without worries and it gives your deprived city mind the "back to the roots" feel you might need, hehehe.
And six years later another person gets infected. I can’t stop watching these videos. Absolutely love this man. Like having a dad that I never had. Thank you sir for all these videos!
This guy is like watching Bob Ross. Very positive and encouraging.
im 39 yrs. old and I found you videos about 4 to 6 months ago and for a guy that didn't have a father that tought nor maybe didn't know himself show how to find or even use these tools the proper way thank you for your channel. My wife and I have two young girls and I want to teach them these skills so they will always have a wood working skill and know how. keep up these outstanding teachings and hopefully You tube will realize your valuable teachings.
Add another, cheaper, tool to the list: My grandfather used a broken Coke bottle as a scraper. He had other tools he could have used, including spoke shaves, but he preferred the Coke bottle. There is no edge on metal as sharp as broken glass. He preferred the Coke brand because of the thicker glass. He particularly liked to use glass when a handle had been exposed to water and the grain of the wood raised. A few strokes with the glass would re-level the surface.
Using a shard of broken Coke Bottle as a scraper was one of the first methods I was taught to re surface and profile worn shovel handles
It'll smooth that raised grain in a minute !
I'm having fond memories of when glass bottles were the norm and aluminum cans were only for long trips
Ok Cody.....you already know your videos has a lot of teaching. So after a hell week of work, dealing with people who not have any sense and do not respect anything.......wacht one of your video is the thing that relax me and reset me mind and soul. It is like balsamic lotion on a burn. thank a lot
+Abel Garcia Thank you Abel.
Thank you for these videos. My dad passed two years ago. Yesterday I was in his quite extensive woodworking shop. I found two old axes. One of the had the characteristics that you've shown me to look for. It was nicked pretty bad and the handle was painted red, although it was flaking. I use my angle grinder and re profiled the blade to get the nicks out. Then I used the knife Method on the straight handle and I just put the first boiled linseed oil on. It's looking so good. Lots of work to do on the head. I just wanted to thank you for this great info.
Hey Cody, I just finished restoring my grandfathers old Hults Bruk axe and put a new handle on it. I didn't have any good tape about to try your method for linseed oil so I got creative. I put a little oil in a very small dish, just big enough for top of the handle sticking out of the head. I stood the axe upside down in the oil and let the capillary action suck the oil up into the handle. It actually worked out really well. Thank you again for all the videos. They were a huge help in restoring my grandfathers axe.
You didn't wast any time getting back from Texas to put out a good video, WOW!!!
Thanks Cody
I am so glad that I discovered Wranglerstar. I love creating axes and hatchets and have not been doing it for very long. I am learning a lot here. Thank you.
I am enjoying your videos immensely. I have been inspired to search out old axes here in the UK to restore. Thanks.
Thank you for all of your videos, such a wide variety of excellent topics.
I have a couple I have to hang new handles on some day. I am so happy I have you to guide me through it. I will try to get video of it and will for sure give you credit for where I learned the methods.
So relaxing Cody. Thank you for your hard work!
Love these videos. I could watch you work on axes and sharpen them every day of the year and not get bored. Thank you. Beautiful axe.
I just subscribed last week and this series couldn't have come at a better time.I just received my husqarvana multi purpose axe today it's a nice axe,but a little ruff around the edges so thank you for sharing your knowledge with us
Another trick I've heard of is to coat the head (just the steel) in Vaseline and fill a small container (something the whole head will fit into) with BLO and actually submerge the top half of the axe head into the BLO. Leave it in there over night and the wood will soak up a lot of BLO deep into the handle. After its done soaking, take the axe out and clean it up, clean off all that Vaseline and put a couple coats of teak oil or tung oil to seal in the BLO. This also helps keep the steel tightly fit and prevents it from coming loose over heavy use.
Hope this helps some of you out there:)
-Shane
Even though we have heard and seen a lot of this stuff over and over from you (and others), these are still my favorite wranglerstar videos to see show up in my CZcams feed.
I’ve also used old coolant to soak loose hammers and hatchets in. It works great and doesn’t dry out
Great video Cody. My family just bought a bunch of property, and we need to take care of a bunch of downed trees. I'm planning on picking up a nice GB or maybe a husqvarna, and this video series is a great resource for keeping it in top condition
Liked your review of Husqvarna axes, so I ordered the carpenter's axe and the multi-purpose models. Haven't got the second, but the carpenter's axe arrived today and it is awesome. Sharp right out of the box, the sheath has a welt added to protect the blade and the grain is impeccable. I can hardly wait to test it out. Thanks.
Looking forward to more axe tips vids!!!!
David is going to get such a nice hatchet!
Just in an effort to be a little helpful- you seem to love wood as much as I do- get on the Veritas website and look at what you need to have and use scrapers effectively? Once you stone an edge square and burnish a good hook on it, a scraper can almost replace sandpaper, a hand plane, even some spoke shave work- a tiny investment and then you can even recycle handsaw blades and such... : )
Best thing ever to clean a workbench...
PS- Ever used Danish oil? Really penetrates to preserve wood, doesn't load up on the surface, a very close-to-the-wood finish like it's not even there, stops right at the surface. Smells great too...
PS- Post sanding, have you used tack cloth? Can even make your own...
Love the passion, very informative 👍🏻
Thank you/ I think do such a beautiful job explaining your subjects and are very educational. That's why I really enjoy watching your videos a following you, wishing you and your family well.
Very nice video, thanks for sharing!
I love this channel. You offer a ton of knowledge and experience. You are a good man and your content brings me peace when I watch it.
God Bless!
✝️❤️
Awesome timing, I let my friend borrow my axe and he nicked the blade, so I am pretty excited to see the sharping videos.
i used teak oil on my handle. came out really nice. i wish i had known the old timers oiling schedule when i did it though.
Search for OLD books that people think are out dated...old gunsmithing has real good old ways to finish or refinish the stocks....i mean old 1900 to late 1940es ..they are out there...gar.sales...auctions...even used book stores....ya get me....
Great video,Thank you for the tips!
Reminded of a buddy who took old blades from a 4 inch wide power planer and used them to make scrapers. he attached handles he made from epoxy putty to fashion make-shift pull knives. He also ground them into odd curves for antique restoration. I use Turpentine mixed with my boiled oil for faster drying and deeper penetration. I can do 3-4 coats a day and it smells GREAT.
I like the sharp knife work the most. I just bought a new hickory handle for my old splitter. I will use my fixed blade skinning knife to remove the varnish. Thanks for the video. I had used sandpaper in the past.
+Bill and Rosa Off Grid Homestead Thank you Bill,
+Wranglerstar I haven't done it but I agree that a nice sharp knife is a good way to do the job. easier to control the depth of the cut/scrape by controlling the angle of the blade. With the spoke shaver you can only control the depth of the blade not the angle (much) Thank you for another video. I always click yours first :D
+Wranglerstar Are the hickory axe handles from Ace Hardware any good? they say made in america and real hickory on them
just found your channel.. its fantastic! just scrapped down my cold steel trail boss handle and thought I had BLO but only had teak oil so I used that. looks good so far.
On the handles for my shovels, maul, axe, demo hammer, and wheel barrel (when I swap them out), I put them into a kiln at 250 for 4 hours, post finish and mineral spirit wipe down, to drive out the water first then liberally apply the oil. takes 6 or 7 coats to actually get a decent amount starting off. It is pretty cool watching it soak right into the grains. I would certainly not recommend it if it is already mounted because that destroys the fit, but for new handles, it works nicely.
When you fit it completely dry, then apply the oil once mounted, it is an unbelievably tight fit!
Loving these series lately. The war bag was a great one for me to see.
I like these DIY vids better than the travel blogs. They pertain to me better.
Cody, in medieval times, linseed oil was boiled with "litharge", a lead compound, to decrease the drying time. Now, it refers to linseed oil, an edible oil from pressing flax seed, to which drying agents have been added. Much better than adding lead compounds which will pollute many times worse than the dryers now added. You can increase it's protective abilities by rubbing in several thin coats, with your fingers or the heel of your hand, rather than using a very thick coating. Dries in about an hour or two, then put on another thin coat, etc. Some of the firearms that I restore have as many as thirty coats, producing a beautiful soft finish. Not rain proof! Tung oil can be used in the same manner; it produces a more waterproof finish. And when you are done with the bottle or can, invert it on the shelf. This will keep the top surface from polymerizing, making it difficult to get out of the container.
Thanks again. Have an axe from my wife's father who passed. In the process of restoring some of his tools to functional shape but as a reminder and a trophy. This should work excellent.
Wow! Never considered using a knife for smoothing out the wood handles. Thanks! Gonna try it my next tomahawk project.
I really like your workshop 🤙
I like the card scraper. It's affordable, you could probably make one if you had to. Also, it seems a little easier than the knife, less chance of doing some damage. Keep up the great work Cody, I love every video!
Ting oil works extremely well, my mother refinished her walnut piano with it and it gets smooth and warm and durable, nice tone, repels moisture and gets better the more you handle it
7:34 that grain orientation is aweful!
I agree. Joe H, the grain orientation should, as a rule of thumb, be as parallel with the blade as possible. Handles the shock of the strike better, less likely to break that way. Know what you're talking about before " keyboard warrior " labeling someone....
Quite a timely set of videos to watch... I've just purchased a Husqvarna Camping Axe... Will be following your recommendations for the axe/hatchet (and to be honest the rest of my outdoor tools - shovel, adz etc)... Greetings from Australia btw
These are some of my favorite videos
a note on the boiled linseed oil, make sure that you're not using steel wool to remove the finish or smooth the wood if you're using it. the chemicals that are used are oxidizers meaning that the tiny metal particles that are embedded in the wood will rust and then bleed unto your wood, that reigns true for any project you use boiled linseed oil in.
Very informative video. Thank you. I am curious about the saw blades you have on the bench; are they something new?
Enjoyed this video, better than the first one. Part is due to you finishing a step and part is due to you giving an idea of what you want to do to the axe in the next video. This makes the video more complete and ties into your next video better~! Cheers.
Mr Wranglerstar consider buying or if you have one an Ontario old hickory knife that's been used to death. I've shaped two of them one small one large into designated axe scrapers to get rid of varnish. When they are sharpened flat on a grinder their very thin stock makes the best handle scraper I've found.
is there a part 3 up? this series is really cool
When applying BLO I just pour some into my gloved hand and wipe it in, there's a good amount of excess which I leave for a few hours, then I wipe it off before it becomes gummy. Good video, thanks for your time and knowledge, not bad for a west coaster ;)
Bob Ross of homesteading
Happy little axe
There's no mistakes just happy axeidents
Little paint thinner, then just beat the devil out of it
I like the sharp knife method takes off just enough and it's easier and gratifying nice deerling btw
David is a lucky guy! That hatchet is looking sweet!
I use a piece of bicycle inner tube to make my "bowl" for the "proud" end BLO treatment....
Could you explain that a little more thoroughly?
+Forge North ... Cut a rubber band per se off an old ten speed bicycle inner tube . Stretch the rubber band over the proud part of the axe handle versus using tape to form a bowl for soaking the top in BLO... tighter fit, reusable for other handles, multiple treatments etc ... hope that helped relay my thought. Stay Safe
+C. Perry Was just scrolling down to the comments to write just this! Bike inner tubes are some of the most versatile scraps on the planet.
+pawpawtx oh that makes sense, thanks
I admire your passion for the little details. I wish more people had the attention to detail. Maybe things would last longer and we could have more "Made in America with pride "
I have found that a tack cloth works well for removing sand paper dust. I really liked this video, I can't wait to try these tips on my own gear.
Just ordered a new Husqvarna Forest Axe and Small Hatchet ($62 & $35 via CPO) and will use some or all of your 'upgrades' when they arrive. Might opt for 100% Pure Tung Oil...but that's just a druther. Totally agree with your scraping preference though. But I'd seriously consider using a Japanese Carving File...the best designed and made wood files anywhere...commonly available...various sizes & shapes. They're like using a file made up of hundreds of little scrapers! Anyway, I've got a number of other choppers around here but among them would most highly recommend the Stihl hatchet sized splitter...the only non maul sized splitter I've ever seen or used that actually is well thought out and works like a dream. Other than the above I wanted to leave you a huge "thank you" for your great Vids. Loved the 'won the lottery' saw Vids and the felling of the big Doug Fir.
Great videos, Really in joy them,
The scraping method works the best. I strip all the stocks on my firearms and put on a boiled linseed oil finish. If they get scratched or dinged, it is a lot easier to repair them, plus the finish doesn't shine in the woods like a high gloss finish does.
In Laura Ingalls Wilder's book "Farmer Boy," there is mention of Almanzo's father scraping an axe handle with a piece of glass as the family sat by the fire in the evening. I'd assume that would be similar to what you are doing in this video.
awesome video. really loved the video. thanks for sharing. :)
My grandfather and father used shards of glass to scrape the surface of the wood , because it costs nothing and glass edge is sharper than any steel...I do not want to read all the comments, so I do not know if someone did not write it before
Hand scraped w/ tung oil is my liking. I really like the way you work.
I've always used broken window glass for scraping varnish from handles, something my grandfather taught me years ago.
Same, also taught by my grandfather.
When the glass gets dull, you can break it once again to get a sharp edge.
I also now use glass for rounding edges and stuff, works really well.
Have you ever heard of Renaissance Wax? It's a micro-crystalline wax polish and it absorbs into wood so well. Because of the micro wax if you apply a couple coats and buff it in it has a great waterproofing effect as well.
I leave the varnish on the end of the handle, that part never rubs my hands, and the varnish helps slow the take up and loss of moisture in the handle. I have a piece of pvc drop the handle in, pour the oil in, let it soak an hour or so, wipe it down hard 1st with a rag, then with bare hands. Wipe it again an hour or so later, then leave it alone a week. Then just refresh it any time I think it needs it after. I live on he Oregon coast though, and linseed takes a long time to harden here. I've noticed you guys east of the mountains have it set up faster there, I'm sure because of the dry air.
thank you for the great lesson. I've learned allot from your videos. I've ordered the German style hatchet from Prandi and I'm looking forward to taking that varnish off and putting some booked lend seed oil on it. thanks and God bless! How are the Prandi axes,hatchets holding up?
I find over here in the UK the best quality linseed oil is the stuff used for oiling cricket bats, always seems to be low on any sort of chemicals and to me produces a nicer finish than the tins from hardware stores.
One thing that works nice with the boiled linseed oil is to wet sand the handle with it. It is how they used to finish gun stocks. The fine dust is worked into the pores of the wood and helps seal the grain. Afterwords if you use some burlap you can buff it like you would with shoes and it shines the wood nicely. It is not necessary with an handle that is used regularly, but with one rarely used or something you display.
Love these videos. You have converted me. No more varnished handles for me!!!!
Hey Wranglerstar, do you think you'll ever visit the UK? A meet and greet here would be cool!
I like to use the bushcraft knife to take off all the varnish, then finish the handle with 80, 120 and finally 320 grit sandpaper to give it a really good hand feel
I just watched the first two can't wait for the other tip's I also looked on your amazon store and I was thinking to myself why don't you sell axe and hatchet handle's too or is there a way to send you my axe head's and you can hang them and what would be the charge for something like this thankyou
I'm sure Cody knows of this, but in case there's fellow viewers who don't; one way of making quality sandpaper last much longer is to keep old shoe soles around and use it as an eraser on the sandpaper. The rubber will pickup built up wood dust off the paper, helping keep the abrasion surface effective for much longer. On cheaper sandpaper I'll also use duct tape on the back to keep it from cracking or tearing.
Have a good day.
I’m with you. The 4 in hand stays in my pouch. I use it all the time.
Cody, perhaps someone already asked this, or you discussed it in a video I missed, but re.: boiled linseed oil... do you apply the first 1-2- coats neat, or do you cut those coats with a solvent? I learned from an old-timer to cut the first coats with turpentine: 50:50. It does take longer to cure (a lot), but that's because the oil gets in there a lot deeper.
Discuss....
one of the great things about the 4 in hand is that its mostly kid friendly, they can carve and shape wood with it rather than use a knife, works great at making things like slingshots.
I fiddle with axes as well. Doing them up or altering them and edging them with what ever i can put on them. You do have the long end there. Its not always about what you buy, it is about what you make it into :)
Warm the combo of boiled linseed oil/turpentine/bees wax is all I'd usually use on wood handles. Nothing better than that beeswax feel. Even better to wet-sand with the cooled down version of that combo.
haha...@Abe. I was just thinking that, I'd love to download his theme music and just chill to it.
The question popped up, "which method do I prefer?"
I'm a bushcraft man...by that I mean I watch bushcraft videos and buy equipment, and go camping.
I prefer using the bushcraft knife. I've used my Mora to exact a nice smooth finish to a craft item. it took time to really lean the technique but as WS said, a bushcraft knife I'd a great tool to keep handy.
My dad used to scrape his axe handles with a shard of glass from a quart jar. It worked splendidly.
Thanks for the info I need to handle a hatchet and all the shop handles are soaked in varnish! How does the knife edge hold up to the scraping?
When putting an axe handle on, how far is the wedge notch cut into the handle?
My son's and I always look forward to your videos.Its always nice to watch Wranglerstar before going to worship, may God continue to bless you and your family.
I use bleach to raise the top grain and let it get flattened by use. It feels so good.
I use spar urethane for its durability, satin finish and it is thin so I can feel the grain.
Did I mention how much I love to feel the grain?
Thank you! Now my Ka-bar is no longer hair shaving sharp!
Its fine! its really enjoyable to scrape all that finish off!
Plus I really like whet stoning knives and was planning to put a better edge! Thank you for all your content I love the way you do your videos! Some people are to nutty your real down to earth.
John 3:16
I found Danish oil from tried and true works great for handles also, and it doesn't have any of the heavy metal driers in it.
+BrokenArrowFarm
Danish oil is one of my very favorite finishes. I have used it on everything from guitar necks to handles of different sorts. Once it is good and dry, you can burnish it to a satin luster that will last years while continuing to develop a beautiful patina.
How do you like that axe? I throw axes somewhat competitively and I use the Prandi german axe
Me again . I don't know if we get the same linseed oil as you have but I was always taught to water down the linseed oil with turps (turpentine) so it soaks in further and drys better .
Tips are great, I learned a lot. If I may: how do you feel about axes you find at Lowe's and Home Depots?
try an elastic band around the tape at the bottom to keep linseed oil from leaking out while it soaks in
How do you clear out the varnish from the lanyard hole? When that varnish is removed, there is end grain exposed.
I subscribed. I think your videos are tremendous. Very informative and end enjoyable. Thanks for making these available.
I use a Q tip and dip it in a cap full of BLO and use it to coat the end of the handle. Another way is to pour some no in a dish and stand the axe in it, overnight and then wipe off any blo off the axe head when you are through.
A scraper or knife are what I use on many of my wood projects. For tight in work I also use a utility knife blade on its own like a scraper.
In sweden they cut the firewood in longer pieces and after that they cut of a full length of bark and it will dry fast. Love the vid.
As far as scrapers go, a 21st century field expedient can be a thickish piece of bottle bottom glass that has fractured and along a 'fortunate' fracture path, leaving a sharp straight-ish edge; if you want to go old school, obsidian baby!
I have found thay raw linseed oil is faster in the long run. It soaks in so fast that I usually have my initial 26 coats coats done in a week and it is dry enough to use after a night by the radiator in winter or 24 hours on my deck in the summer.
Cody I recently bought a Marbles camp axe and had to use it before I could condition it. Now that the oils from my hands have been on it, what's the best method of cleaning the handle before I treat it with BLO? Thanks!
Instead of tape for creating an eye "bowl", I cut a cross-section of bicycle inner-tube and stretch that on. Can't take credit for the idea, as I read it somewhere, but it works beautifully and doesn't leak.
I just need to know! where did you get your green coat and grey vest? I love them so much
You mention never having seen varnish on the head end of the axe handle. Sadly, I have. The local general market has a tool stall, and the axes they sell are ... let's be charitable and call them "for people on a very limited budget". Sadly, when you look onto the head end of the handle, they are usually cut too short, and then the shortfall is made up by pouring an epoxy resin into the end.Those which are cut close to flush usually have a varnish over the end. I think that, until proven otherwise, you could use the presence of varnish at the head end as an indicator of lower specification, mass-produced-to-a-budget items.
A very informative video as always. As a side effect of your videos, all the wooden handles i have access to at home and at work are now de-varnished and cleaned up, and given a monthly wipe-over with boiled linseed oil. Heck, even the workshop broom and hand-brush have had "the treatment", and are so much more pleasant to use now!
what knife were you using for the scraping in this video.i'd really like to know. because i have an old SA wetterlings boy scout hatchet head that I've re-profiled and need to make a new handle for and I love your methodology. Hand done and extremely nice work. Great job and I appreciate you sharing your knowledge. I thank you greatly for that.