Homemade DIY Small CNC Lathe 【DIJEST】
Vložit
- čas přidán 21. 01. 2023
- #DIY#CNC#5axis#Awesome_CNC_Freek
How to make a DIY CNC Lathe series digest.
I had always wanted a CNC lathe to lathe metal , but there were no CNC lathes on the market that were small enough to fit in my soundproof box and could lathe metal, so I decided to build one myself.
It took about four months to produce.
Website for this video series www.acncf.site/en/cnc-lathe
##########################################
The DIY Small CNC Lathe 3D CAD Data【for fusion360 and step file】
To celebrate the completion of the CNC lathe, I will issue 50% discount coupon limited to 30 Only for people who have seen this video.
That coupon expires on February 28 , 2023 so if you are interested, hurry up and click the link below.
Coupon Code : 234362
awesome-solution-workshop.tea...
##########################################
Homemade DIY Small CNC Lathe 【DIJEST】Part 1〜7
• Homemade DIY Small CNC...
Part 1 Design • Homemade DIY Small CNC...
Part 2 epoxy granite base • Homemade DIY Small CNC...
Part 3 Scraping & Z axis linear guides • Homemade DIY Small CNC...
Part 4 Make metal parts • Homemade DIY Small CNC... 5axis CNC
Part 5 Modification of parts • Homemade DIY Small CNC...
Part 6 Wiring and Operation check • Homemade DIY Small CNC...
Part 7 Test cut • Homemade DIY Small CNC...
part 8 I tried making original G code • Homemade DIY Small CNC...
Red CNC machine • 【Cut Steel】3 simple re...
Awesome Solution Workshop
awesome-solution-workshop.tea...
Quick Change Tool post set. s.click.aliexpress.com/e/_DEK...
Lathe Head Assembly s.click.aliexpress.com/e/_DFs...
Tool Holder s.click.aliexpress.com/e/_DEM...
Servo Motor s.click.aliexpress.com/e/_Dda...
Ball screw 200mm s.click.aliexpress.com/e/_Dmd...
Ball Screw Housing FK10 s.click.aliexpress.com/e/_DkS...
Liner Guide MGN12H, 150mm s.click.aliexpress.com/e/_DEK...
Threaded Rivet Insert s.click.aliexpress.com/e/_Dex...
Power Supply s.click.aliexpress.com/e/_Dl9...
Fine sand for epoxy granite www.acncf.site/en/amazon-e220...
Web Site www.acncf.site/en/top
Become a member of this channel
/ @a-cnc-f
*These are affiliate links. When you click one of these links and make a purchase, it helps to support this channel projects. - Jak na to + styl
Website for this video series www.acncf.site/en/cnc-lathe
As always, another cool machine. :) I'd prefer to hear the sounds made during construction. The music, eh, not needed.
Finally, some good reference for making CNC Lathe
Браво!!!На вищому рівні!!!!! Респект!!!!!!
Love the video. And great music
Super robota ! Brawo za pomysł
Thank you so much! Excellent work!
Mesmerizing build! Thanks!
Great Job man!👌 Congrats to this build👌
Duuuuude! It's awesome! Great work! Guide accuracy is incredible.
Amazing!
This is such a mind-blowing build to me. Amazing work!
Незнаю навіщо я це дивлюсь,але це круто!
all you need to build this awesome cnc machine is a cnc machine! how creative!
I must have this playlist for my shop!
Oh and i love the tune too!
That's incredible
Bravo
popular mechanics had one of these in the way back!! pretty cool!!
Fantastic👍🏻👍🏻👍🏻🥰
Nice machine, keep up the good work.
Amazing...you are a genius...beautiful machine...🤩
Nice project! Well done
Awesome...
I actually see someone lapping and attempting to do this right. . Ive been watching videos amazed how many don’t. You are the first. Im going to do a video soon myself to show the proper prep of a mill turn. TY🎉
Have to admit you’ve got some crude stiff there too. Hope you can keep upgrading and get rid of Ll the hacks.
Great job! I'm now inspired to do something similar with a steel CNC milling machine for metal. Huge thanks for the experience!
not the music. the machine is awsome
KEEP GOING , YOU ARE DOING GREAT
Thank you for everything.
Heiliger Strohsack! Sehr schön!
Magic
Creative video, thanks :)
Great job. So mutch dificult then a cnc machine !!! Congrats...!!
Wow
You make that look too easy. Well done.
Thanks
Good Job , Seeing The surface finish i can say the rigidity has to be improved a lot. Good Luck
Good job bro
Superb 🤩
Very cool!!!
Fantastic work! Truly awesome achievement . . . well done my friend! Wonderful to see this. And the video is excellent, really fun. Wishing you good luck in the future!
I am glad to hear that much praise.
It motivates me.
If anyone wanna hear about design process and more, rather than the music, please check out the video description. Thanks for sharing.
This video is a digest of a video series on producing CNC lathes.
If you want to know more details, please watch the videos in the overview section.
The music is just fine
Dude is kind of a genius then he starts to lathe with a drillbit. :D
Я в шоці! Браво!
quả là 1 thành tịu cùng nhau phát chiển nhé bạn
you are a legend dude
Awesome setlist too... Fire
Brawo !
I am honored to be appreciated by a great youtuber like you.
This is brilliant! Subbed here.
nice toy
That sound at the end when parting is so familiar... Just not enought stiffness for such a small gadget, I guess.
its pretty cool. If you ever build another you can get granite reference surfaces which can be grade A from many sites, even amazon for fairly cheap. They make a great starting point for a rigit lathe or mill.
If you can I'd switch out the risers for the chuck with cast iron. There is also rubberized epoxy you can put between the riser and the bed as well as the riser and the chuck to dampen sound and keep the bolts from vibrating loose.
Thanks for the advice.
I'm glad you are interested.
@@a-cnc-f a cheap for granite bloc and plate are rejected / dismantled graves , that a cheap supply of granite and grave making company can recut at the needed dims . That also possible to lap them to metrology class . I have built several setup for microscope or measuring machine with these granite supply .
cool
Хорошая работа!Подписался.
эпоксидный гранит в станкостроении-интересно....надолго-ли жесткости хватило....
🙌🏻👌🏻
Cooles Video, aber die Musik ist Horror. Like von mir. 😉
Круто 👍
Very cool project. I like the creative use of the "tool" für vibrating the air out of the resin. But the "music" ist totally annoying
Soldering cam at 15:00 was brilliant 👌
Thanks for the advice.
Real awesome freak, I just subscribed. Good work.
I would suspect the main lathe axial bearing part isn't rigid enough.
Would love to see your new works soon.
As for strength, I'd like to improve on that a bit.
Первая Реклама спиртного. Вторая реклама собачий корм 😁👍
всё правильно...выпил-закусил :))))))
Looks like you've started from nothing but now have working machines. That is impressive. I saw you included footage of parting off steel, too, which is a good test for rigidity. The sound it makes shows that there is still opportunity to improve. It's hard to know what causes vibration. Sometimes it is something small. I'm working on a 9x20 lathe at the moment, trying to make it more rigid. One trick is to put an indicator on a part and try to move it with your hands or pry bar. Something as simple as bolting the machine to a bench can make a huge difference.
I agree with you.
Mechanical strength is very important.
The tests you mention are done in part 7.
Anyway, I would like to increase the strength of the machine as well.
czcams.com/video/MuYGT4BuFmo/video.html
@@a-cnc-f did you use a cross slide from a cheap minilathe? Most of the time, they are terrible. Al riser blocks under the spindle aren't the best solution either.
Otherwise, it's a nice build. I like the base and the use of guideways.
@@besenyeim Cheap parts can have product problems.
But high quality products are expensive.
@@a-cnc-f Have you considered making your own cross slide with guide rails? I think you can make a better one.
I have thought about it.
The problem is that I don't have good machine to make it.
I have a 5-axis CNC machine that I built myself, but the machine size is small and it is not strong and powerful enough to do high precision machining.
☆☆☆☆☆
Amazing woork man
You r jineus
Thanks for the compliment, it motivates me.
i want ready
That's awesome! How did you collect so many skills? How did they come together for machining? Curious to find out and exchange background history. Subscribed and hooked. TY
This is the result of researching each of the unknowns.
There are still many things I don't know.
now do an EDM 😆they seem like such a no-brainer for cheap Chinese kits, no cutting force means they're basically a 3D printer in a tub
👍👍👍🎉
Totally awesome dood! I have been looking at my old lathe and my pile of Cnc parts and wondering if i should build a new Cnc lathe. I think i will now! Love the resin base. Looked like it struggled a bit with parting off, id be interested to know if and how you have overcome this. Did you do the tool changer and live tools?
My focus is on making the machine smaller.
I am thinking about tool changer and milling, but that is my next project.
Currently, I am working on a new 5-axis CNC machine.
Once this is finished, I believe I should be able to easily make advanced parts with it.
So I'm thinking of further modifying the CNC lathe.
that's crazy
Be interested to know what the red cast block was? You have sandpaper glue to it? Awesome build but I question the linear rails you went with look like they are for low load linear motion like 3d printing?
Thanks.
Certainly, linear guides are not designed for high loads.
Very cool! Looks like you have a lack of rigidity, probably due to the belts, any plan to change to screws?
thr belts is used for miniaturization and sound deadening. There are no plans to change this at this time.
@2:20 lol
When I think CNC lathe, I think rave tunes...?????
Fantastic job. The epoxy granite should be plenty rigid enough?
Epoxy granite has long been used as a substitute for casting castings. It should be strong enough.
In fact, after building this CNC lathe, I have no complaints about the epoxy granite base.
Awesome Job 😃
Only flaw is the base of epoxy. It is prone to resonance.
Epoxy granite is an excellent material for machine bases.
en.wikipedia.org/wiki/Epoxy_granite
👍🏻
Awesome job, compliments:D.
Can this machine be used as a watchmaker lathe?
I think it can probably be done.
great work, but sadly... mild steel and aluminium will never quite match solid cast iron.
i was holding the edge of my seat watching that parting blade.
really seems there would be a market for a basic 4 axis mill/lathe combo. in cast iron. with a bit more meat behind it than the average sieg...
one year later
are those linear rails still working?
what would you do different?
So far, no problems.
I don't use it that often to begin with.
And I don't have the power to do that much heavy cutting, so it's not enough to break me.
For now.
What's the grey filler you used in the epoxy?
yes.
An epoxy granite machine base can be made with epoxy, sand and gravel.
i still can't get passed the fact you are using what looks like a 2 flute flat endmill as a boring bar.... 🤣🤣🤣🤣
Nice project! 😎(horrible music though 🙉)
what software did you use for gcode programming?
I do not use CAM software for this machine.
czcams.com/video/AUsqvSUCJYk/video.html
whats the grey powder in the epoxy?
This is it.
www.amazon.com/220-Aluminum-Oxide-Blasting-Abrasive/dp/B08KHLW2DJ?pd_rd_w=cHUp2&content-id=amzn1.sym.deffa092-2e99-4e9f-b814-0d71c40b24af&pf_rd_p=deffa092-2e99-4e9f-b814-0d71c40b24af&pf_rd_r=M5JM3WGH8W1V3D7X6428&pd_rd_wg=Obd1h&pd_rd_r=9190b4f4-cad3-4ce8-987e-7432ca0a7b04&pd_rd_i=B08KHLW2DJ&psc=1&ref_=pd_bap_d_grid_rp_0_1_i
Please 4k. thanks
Did you try to turn the cutter upside down for parting operations?
I have never tried it.
But I will give it a try. Thank you.
Thank you.
Why would you? With the right speed and feed settings, and with the right cutting tool profile It would do the job easily if its rigid enough. From the video, the feed and the profile is pretty off in my opinion.
@Thom if the lathe is not strong enough for parting, cutting upside down is better. When the machine flexes, tool doesn't pull into the workpiece.
@@dokmetasonur The forces seems to be the same to me. In normal position the knife is pushed down to a muc more stable surface the some screws. I never used it upside down tho, only other knifes and only for speed.
I missed your comment, sorry.
The machining conditions for grooving are difficult.
I will put out a video of machining with the tool mounted the other way around in my next video.
Where is the other half of the machine? The rest of the bed and ways, the tailstock, steady or follower rest, etc...
Those have not been made yet.
@a-cnc-f Ohh nice! At least a tailstock would be very helpful, the rest might be overkill. Nice machine, great job!
What prize
whats the size of the chuck ??
K11-80
Best thing With CZcams clip like this that you can turn off the sound. Musik whas painfull but the machin looks cool.little chatter tho
It has been a technological deployment.😮
The music.... omg.... what made you choose it? explain please....
My preference.
. A flying saucer
Wouldn't be half the trouble
Lol ya goofy m8te from Australia
Kleinigkeiten, Die in meinen Augen eine Verbesserung darstellen würden:
-Der Motor für den Ober-Support liegt genau im Späne-Regen - auf der anderen Seite angebracht sollte Dieser weniger ab bekommen.
-Endschalter besser 'überfahrbar' montieren - damit die Achse am Endschalter vorbei fahren kann - und nicht den Endschalter zerquetscht, wenn's doch Mal blöder läuft.
... hehe ... 10 Sekunden später ... der Endschalter IST überfahrbar (zumindest der Eine - ich schaue weiter)
-Verlöten der Litze: Bei dieser Art Klemme sollte Das kein Problem darstellen (federbelastet) - bei Schraubklemmen wäre Das aber ein 'no-go' - das Lot fließt unter dem Druck der Schraube langsam weg und der Kontakt wird schlechter - bei Schraubklemmen Aderendhülsen (könnten entfallen, wenn die Schraube nicht direkt auf die Ader drückt, also z.B. bei Aufzug-Klemmen - schaden aber auch dort nicht - die paar Cent sollte einem die Sache wert sein).
-Die Drehzahl-Anzeige könnte man von den Ansteuerungs-Signalen ableiten - wäre dann auch genauer/schneller reagierend, als bei Aktualisierung 1x/Umdrehung
Alles in Allem respektable Arbeit und ich bekomme wieder Lust, meinen Versuch ebenfalls wieder Leben einzuhauchen (Grundplatte ist ein schwerer Tisch mit Führungen drauf - achja, Portal-Fräse bei mir ... vll. ... irgendwann ... :) )
Hätte es nicht besser beschreiben können 😄
Vllt wäre noch die gesamte Stabilität der Konstruktion zu bemängeln - siehe Zerspanung am Ende des Videos. Sehr viel Optimierungspotential, aber im ganzen eine solide Idee für sowas.
Mich wunderts dass dein Kommentar von den ganzen begeisterten noch nicht zerpflückt wurde 😂 denn es heißt ja oft „die Deutschen können nichts loben - immer nur meckern“ 🤣
Man hat da wohl einfach andere Standards als andere Nationen 😅
Thanks for all the advice.
I was very worried about the placement of the stepper motor on the X axis.
One of the most important aspects of this lathe for me is the small size. I have imagined that it would come down to the cutting tip motor, but in terms of miniaturization I thought this was the best placement.
I will act on your opinion regarding the switch.
I am glad if you felt something when you watched my video.
Thank you.
@@DeamRules Die Russen meckern genau so rum😅
看起来很难 其实一点也不简单
Best way to do parting is to cut in reverse so that your tool doesn't get pulled into the workpiece.
How much did this all cost to build?
I don't remember exactly, but I think it was about $1,000.
like your machine...but music is a little disturbing, ... too special for all of us here ...
The music in this video may have been too much in line with my taste in music.
@@a-cnc-f problem is, that I have some defect in hearing.... often change between voice & music makes it even more stressful for me. next time, take a piece of music from Mozart, Vivaldi or Bach 🙃
the music interfered with the video. nothing to see. You can't hear the noise of the tools, otherwise I would have liked it. thanks
На первом тесте видно дробление
Если это там где он протачивал головку болта, то это нормально. Жесткость станка минимальная, а болт наверника цементированный. А вот где проходил отрезной даже жалко стало станок, надо внести поправку в команду, чтобы резец проходил в два прохода (я имею ввиду увеличение канавки прежде чем углубятся дальше), да и центр похоже не выдержан.
Диванный токарь 10 разряда 😁
well that answered the idea using a vibrator.