How to wire TPT-500.4 and other Brazilian 4 channel amplifiers with 3 terminals!
Vložit
- čas přidán 22. 08. 2024
- In this video I explain in depth how to wire Brazilian 4 channel amplifiers with only 3 terminals. What does 2 ohms mean? How low can I drop the ohm load when bridging? How do I wire 2 channels separately with only 3 terminals? All these questions and more are answered with this video.
This video also works for other Brazilian amplifiers.
HOW TO WIRE
HOW TO BRIDGE
TIMPANO TPT-500.4
TIMPANO TPT-1000.4
PRV QS400.4
PRV QS800.4
PRV QS1200.4
STETSOM IR400.4
STETSOM HL800.4
STETSOM HL1200.4
STETSOM HL2000.4
TARAMPS 400.4
TARAMPS 800.4
TARAMPS 1200.4
keep doing videos man 🔥 helps people who love music or people who wanna get into music learn and enjoy the processs doing great bro
Going to try and keep going 💪🏻
Keep doing videos 🔥🔥 should do one doing the boxes for the prv12ft1500 ported on 4 corners
The first example you drew out can that be used to wire the 4 4ohm speakers in my truck?
Yes
Hey. Thanks for the video. Quick question. I just bought this amp and have a set of JBL 6.5 components. My question is...the JBL are 3ohm. What would be the best way to wire this through the crossover that came with the speakers? They are 75 watt RMS and i am assuming the 3ohms is per speaker...thanks for any help you may provide. Mike
You probably should use the crossover that comes with it. The final ohm load with everything is what's important
I want to buy this exact amp. I'm upgrading my corolla speakers since I install an android unit. So I will upgrade 2 - 6.5" component speakers with tweeters that have a cross over to the 6.5". Then 2 - 6x9 in the rear 2, 3 or 4 way don't know yet. Is it possible with this little amp I just need a little umph since the factory speakers sound crappy now. I'm hoping for a little bass nothing killler. do you have a video on how to do this install with this set up and what do you recommend to set it up this way. Love this video I learned a lot. love the way you simplify things. I installed a Xtrons android head unit 9". Where would be prime location to put the amp. Rear in trunk, under seat or up front? looking forward to your answer. Thank you for any help given.
all speakers are 4oh do i need to run two of these amps or get 2 oh speakers?
I have this amp installed in my 2014 Corolla LE to an android head unit. I upgraded the speakers 6.5 mids and tweeters on front and 2 6x9 on rear. I also added a 4 band parametric EQ and a PRV 2.4 DSP. Honestly it sounds great but if you want sound quality and clarity not just loudness, you definitely need the DSP. That thing works magic.
You can put 4 speakers on this , 1 per channel. For car audio speakers it should be plenty of power. Just run 1 wire to each door for the speaker. 16ga is fine. Put the amp wherever you can fit it.
Hello I Have a 1000w 2ohm timpano can i do 2 - 4ohm twt and 4 - 4ohm speakers
Is it the first example on the paper?
Yes, 2 per channel in parallel
I blew( 2)8" black diamond 8ohm speakers with this amp is there another way i can contact you when i wire the new speakers i just ordered? So i dont blow them up as well??
How many watts is each speaker? Maybe it's not enough power.
Can I bridge 2 8ohm tweeters on one side, and then use the other 2 channels to run 4 4ohm speakers?
Yes, you can. But this way, you are getting much more power to the tweeters than the speakers.
Ok I have the timpano 500.4 2 ohm. I want to run two 4 ohm speakers for rear and two 2 ohm speakers for the front channel . Can I do that , do I bridge the 4 ohm and hook up the front 2 ohm normal???
Please watch the video again, until the very end. I clearly explain that you can't and why you can't bridge 4 ohm speakers.
Ok I watched it again. So I can hook up 4 ohm speakers normal to the amp ? Not bridged. The front channels are 2 5.25 speakers and the rear channels are 2 6x9. I did have the 6x9s hooked up bridged to the rear channels and they worked but it's going to be bad for the amp u said. I appreciate the help. Thanks in advance. I just want to clarify what will be alright to run them.
Which amp is the best fot timpano tpt-dh2000 ?
Depends how many you are using?
Do I need a crossover for super tweeters?? I have this same amp and (4) 4 ohm supertweeter
For just tweeters, no, you can use the crossover switch to take out the low frequency.
Wich speakers recommend to this amp at 4ohms?
Anything that's around 200/300w. It's a little weak for 500w speakers but it will work.
Actually is a 2 channel amp
The center connector is a dummy slot
Wrong. It's a 4 channel amp and the center is absolutely NOT a dummy slot. Did you even watch the video?
How do I use my processor to play bass?
By putting bass frequencies in the crossover.
So they're basically being wired in series
No they're not.
No they're not.
O" to of this timpano tpt-dh2000
I didn't quite understand the message but you can wire 4x TPT-DH2000 to a 4 channel by wiring them in pairs, in parallel, then bridging each pair to each side of the amplifier.
get back with the vids brave
Back at it 🎉