Hi Juan, thanks for watching our CZcams videos and for getting in touch! For this kind of question, it will be best if you contact your local Danfoss support office to make sure you get the help you need from the right specialists. Please find contact information here: www.danfoss.com/en/contact-us/ Best regards Danfoss Drives Social Media Team
Hi Haji, Thanks for your interest in our video! I'm not aware of any specific workshops for this, however if you search for 'Integrated Motion Controller' on danfoss.com, quite a bit of documentation comes up, including an Application Guide: www.danfoss.com/en/search/?query=Integrated%20Motion%20Controller&filter=documentationLanguage%3Aen_en%2CdocumentationArchived%3Afalse You are also welcome to follow our webinars or watch previous webinars here: www.danfoss.com/en/about-danfoss/news/dds/globalwebinars-4-2020/ If you need specific support in setting up your machine, I would recommend to contact your local Danfoss Drives support: www.danfoss.com/en/contact-us/ Best regards Danfoss Drives Social Media Team
Hi Alberto, For this kind of technical support, it will be best if you reach out to your local Danfoss support office. They will be best able to help you. Please find contact information here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Just select the country you're located in and you will see who you can contact. Best regards Danfoss Drives Social Media Team
@@danfossdrives I am the local support office Puerto Rico and we have a client that requires this service, please just want me to confirm if it is possible to enter the position through profinet or in any case a contact in Europe who could help me on this issue
@@albertoroselloalvarez8241 All our parameters are accessible via bus, is the info I've got. But for further information it's best if you go through Danfoss technical support. I suggest you use this form: www.danfoss.com/en/contact-us/contacts-list/contact-details/?id=261e36bd-ca53-42cd-0a8b-08d63b8e7523
Hi@@user-cc9sn3bx4l, I think it will be best if you reach out to your local Danfoss support office for this kind of support. They will be best able to help you. Please find contact information here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Just select the country you're located in and you will see who you can contact. Best regards Danfoss Drives Social Media Team
Hi Yopi, I would like to ask you to reach out to your local Danfoss support office for this request. Please find the list here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Just select the country you're located in and you will see who you can contact. Best regards Danfoss Drives Social Media Team
Positioning only works in flux mode. Select parameter 1-01; and select "flux sensorless" or "flux w/ motor feedback". In parameter 1-00 select "positioning"
Hi Ray, you have to use the FC302 just like in the video. For more information about the VLT Midi Drive FC 280, please also see here: www.danfoss.com/en/products/ac-drives/dds/vlt-midi-drive-fc-280/
@@michaelmcclellanjr9831 Hi Michael, it's an old Lafert motor. The type number is B5602P3H2BRS0000. Hope this helps! Best regards Danfoss Drives Social Media Team
@@michaelmcclellanjr9831 Hi Michael, Danfoss is generally not recommending any specific motors, our drives are designed for motor independence meaning they can basically operate any AC motor both asynchronous and synchronous motors. Please contact your local Danfoss representative if you need further support on selecting the best drive for your application. You can find the contacts here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Best regards Danfoss Drives Social Media Team
142/5000 In my factory there is inverter FC-302P30KT5E20H2BGXXXXSXXXXAXBUCXXXDX , which has a number of terminals from 1 to 12( green). show me how to connect the encoder and how to set these parameters.Looking forward to receiving answers, as well as video tutorials.
Hi there, For this kind of technical support, it will be best if you reach out to your local Danfoss support office. Please find the list here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Just select the country you're located in and you will see who you can contact. Best regards Danfoss Drives Social Media Team
The clamp to hold LCP holder is great ;)
Dear sir how I connect my PC with vlt
Hello, How to configure closed loop for position control? Using an incremental encoder 32/33 input. Best regards
Hi Juan, thanks for watching our CZcams videos and for getting in touch! For this kind of question, it will be best if you contact your local Danfoss support office to make sure you get the help you need from the right specialists. Please find contact information here: www.danfoss.com/en/contact-us/
Best regards
Danfoss Drives Social Media Team
Many Thanks for that
So do you have a workshop and where please ?
I got a Cookies Machine to set up if possible.
Hi Haji,
Thanks for your interest in our video! I'm not aware of any specific workshops for this, however if you search for 'Integrated Motion Controller' on danfoss.com, quite a bit of documentation comes up, including an Application Guide: www.danfoss.com/en/search/?query=Integrated%20Motion%20Controller&filter=documentationLanguage%3Aen_en%2CdocumentationArchived%3Afalse
You are also welcome to follow our webinars or watch previous webinars here: www.danfoss.com/en/about-danfoss/news/dds/globalwebinars-4-2020/
If you need specific support in setting up your machine, I would recommend to contact your local Danfoss Drives support: www.danfoss.com/en/contact-us/
Best regards
Danfoss Drives Social Media Team
Is it possible, instead of entering positioning values by LCP, to enter values remotely using profinet?
Hi Alberto,
For this kind of technical support, it will be best if you reach out to your local Danfoss support office. They will be best able to help you. Please find contact information here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Just select the country you're located in and you will see who you can contact.
Best regards
Danfoss Drives Social Media Team
@@danfossdrives I am the local support office Puerto Rico and we have a client that requires this service, please just want me to confirm if it is possible to enter the position through profinet or in any case a contact in Europe who could help me on this issue
@@albertoroselloalvarez8241 All our parameters are accessible via bus, is the info I've got. But for further information it's best if you go through Danfoss technical support. I suggest you use this form: www.danfoss.com/en/contact-us/contacts-list/contact-details/?id=261e36bd-ca53-42cd-0a8b-08d63b8e7523
Is that possible to use that functions for asynchronous motor? I am planning to use that for dough machine.
Hi there, the answer is yes, it is possible to use IMC on an asynchronous motor.
Best regards
Danfoss Drives Social Media Team
@@danfossdrives I am sorry for my repeated question, but you think that the settings are the same as in yours video?
Hi@@user-cc9sn3bx4l, I think it will be best if you reach out to your local Danfoss support office for this kind of support. They will be best able to help you. Please find contact information here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Just select the country you're located in and you will see who you can contact.
Best regards
Danfoss Drives Social Media Team
how to get firmware 48.20. (ose , oss , osx files)?
Hi Yopi,
I would like to ask you to reach out to your local Danfoss support office for this request. Please find the list here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Just select the country you're located in and you will see who you can contact.
Best regards
Danfoss Drives Social Media Team
Nice Vedio
Howcome I can't see the parameter 1-09 [positioning] ?
Positioning only works in flux mode. Select parameter 1-01; and select "flux sensorless" or "flux w/ motor feedback". In parameter 1-00 select "positioning"
Can I setup an positioning application with a VLT Midi Drive FC 280?
Hi Ray, you have to use the FC302 just like in the video. For more information about the VLT Midi Drive FC 280, please also see here: www.danfoss.com/en/products/ac-drives/dds/vlt-midi-drive-fc-280/
@@danfossdrives What is the part number please of the motor that is being used in this demonstration?
@@michaelmcclellanjr9831 Hi Michael, it's an old Lafert motor. The type number is B5602P3H2BRS0000. Hope this helps!
Best regards
Danfoss Drives Social Media Team
@@danfossdrives Is this the motor series that Danfoss recommends for IMC applications? Could you provide some other suggestions?
@@michaelmcclellanjr9831 Hi Michael, Danfoss is generally not recommending any specific motors, our drives are designed for motor independence meaning they can basically operate any AC motor both asynchronous and synchronous motors. Please contact your local Danfoss representative if you need further support on selecting the best drive for your application. You can find the contacts here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS
Best regards
Danfoss Drives Social Media Team
142/5000
In my factory there is inverter FC-302P30KT5E20H2BGXXXXSXXXXAXBUCXXXDX , which has a number of terminals from 1 to 12( green). show me how to connect the encoder and how to set these parameters.Looking forward to receiving answers, as well as video tutorials.
Hi there,
For this kind of technical support, it will be best if you reach out to your local Danfoss support office. Please find the list here: www.danfoss.com/en/contact-us/contacts-list/?filter=type%3Adanfoss-sales-service-center%2Csegments%3ADDS Just select the country you're located in and you will see who you can contact.
Best regards
Danfoss Drives Social Media Team
Thanks