I have found that when you get the wind row set, go back over it with the right front tire just to the left of the row and let the rake roll it more to the left and the windrow will be rolled and more narrow, better for the square baler to make more consistent bales.
I agree, make a twist in the windrow for a square baler and bales will look great. I tell my customers when I train them... You learn how to rake once you bale. You learn how to cut once you rake.
My father used to do all his hay with this back in the day. One of the lift connections had the tip missing so instead of a clip he tied it with a rope. The rope never actually failed! He used to make big rows for making hay cocks but sometime it would 'rope' the hay. That was the only downside to it. But with no pto, it was a great machine. It's rusting away in the corner of a field now sadly.
😅I have a 1/4 acre that is long and narrow. I have cut it with a brush hog and want to rake it up, dry it, and store it loose. Would this be a good way to rake it to dry then load it on trailer to haul to the barn?
I would get you a two wheel rake. But in the future to get more tonnage, use a hay mower, sickle, drum or disc. A hay mower cuts the forage one time where a rotary cutter chops it up into small pieces and you have a lot of loss. We have seen hay yields decrease over 60% using a rotary cutter.
How would this type of rake work for lucerne? I am still doing everything by hand but I am now looking to go a bit bigger. I don't want to be wasting anything.
They work fine in medium thick grass. If there is too little material it will fall between the tines, and if the material is too thick the wheels will ride on top of it. Nor is this machine good for turning. Turning to the right makes a complete mess. Turning to the left does work somewhat, but not sharply. Rather only make straight windrown and lift the rake when you are turning at the ends.
@@cypak4477 not sure what you mean, all the wheels are the same on a right hand rake. If you have left hand wheels on a right hand rake the hay will just pile up beside you. there is no way the hay can exit.
sorry mate but this is wrong, maybe it is just due to purpose of video capture, but you are driving way to slow. Those wheels have to spin faster to be effective, the tractor has to pull faster.
Your correct but we wanted to show how the machine worked. In addition, we do not want someone with little experience drive faster than their experience allows.
@@smallfarminnovations4265 didnt want to sound like ass (which I did at the end), maybe it should be mentioned and showed in video that the rake is more effective if the speed is higher.
“Remember, you will learn to rake once you bale!”-never were truer words ever spoken!!!
Never operate a rake unless you have operated a baler
Thank you Thank you! Just bought a 3 rake and didn't understand how it works. This helps so much!
Great tutorial, thank you!
Thank you so much for this video
I have found that when you get the wind row set, go back over it with the right front tire just to the left of the row and let the rake roll it more to the left and the windrow will be rolled and more narrow, better for the square baler to make more consistent bales.
I agree, make a twist in the windrow for a square baler and bales will look great. I tell my customers when I train them... You learn how to rake once you bale. You learn how to cut once you rake.
Excellent
My father used to do all his hay with this back in the day. One of the lift connections had the tip missing so instead of a clip he tied it with a rope. The rope never actually failed! He used to make big rows for making hay cocks but sometime it would 'rope' the hay. That was the only downside to it. But with no pto, it was a great machine. It's rusting away in the corner of a field now sadly.
Exactly what I was after, thank you!
Great to hear!
Must be nice to put up hay on table top flat land . I'm jealous.
Yes, A wheel rake is a great low cost way yo rake hay but they are ground driven and require some skill to operate for the beginer.
😅I have a 1/4 acre that is long and narrow. I have cut it with a brush hog and want to rake it up, dry it, and store it loose. Would this be a good way to rake it to dry then load it on trailer to haul to the barn?
I would get you a two wheel rake. But in the future to get more tonnage, use a hay mower, sickle, drum or disc. A hay mower cuts the forage one time where a rotary cutter chops it up into small pieces and you have a lot of loss. We have seen hay yields decrease over 60% using a rotary cutter.
How would this type of rake work for lucerne? I am still doing everything by hand but I am now looking to go a bit bigger. I don't want to be wasting anything.
I would go with one of our rotary rakes. very gentle and minimal leaf loss. Also no dirt to introduce parasites or tooth problems.
Thanks so the rotaries rake a bit cleaner?
What hay rake is being used in the video?
4 wheel Befco 100% Italian Made
Need wheel hay rake 2+2 A shape which work in sugarcane farm. Row system.move leaf trash from one row to another row.
HOW WELL DO THEY WORK ON SMALL GRASSES SECOND CUTTING FINE HAY
They work well with material 6" or longer. Thats my opinion. They use them to rake leaves and pine needles.
They work fine in medium thick grass.
If there is too little material it will fall between the tines, and if the material is too thick the wheels will ride on top of it.
Nor is this machine good for turning. Turning to the right makes a complete mess. Turning to the left does work somewhat, but not sharply.
Rather only make straight windrown and lift the rake when you are turning at the ends.
@@Drottninggatan2017 thank you for letting me know that
Dlaczego jedna obręcz jest założona zębami w lewo a druga w prawo?
English translation?
@@smallfarminnovations4265 Why are the teeth on one rim set to the right and the other to the left, does this have any specific meaning?
@@cypak4477 not sure what you mean, all the wheels are the same on a right hand rake. If you have left hand wheels on a right hand rake the hay will just pile up beside you. there is no way the hay can exit.
sorry mate but this is wrong, maybe it is just due to purpose of video capture, but you are driving way to slow. Those wheels have to spin faster to be effective, the tractor has to pull faster.
Your correct but we wanted to show how the machine worked. In addition, we do not want someone with little experience drive faster than their experience allows.
@@smallfarminnovations4265 didnt want to sound like ass (which I did at the end), maybe it should be mentioned and showed in video that the rake is more effective if the speed is higher.