thanks for the video. helped greatly. the only thing I did differently was, I taped the cameras with yellow tape before unscrewing them so the cameras wouldn't moved. It worked.
Thx a lot. It works nicely. The camera Module can take in place Not nessesary to demaunt it. Heat up battery 55degree. Heat up for the Display 85 degree in a Ofen. Works without any Problems. 45 mins
Don't need to take cameras out. Just unclip all the flat connectors. The whole camera circuit board will come off. Then we can UNCLIP the old screen flat connector from the main motherboard. To put re-clip the flat connectors, under the the camera circuit board, simply line up the circuit board where it need to be. Then press down. All the flat connectors will go back to where they are supposed to be. PS: put in the oven at 90deg for 10min. Easier to remove old screen with plastic triangle.
thanks for the video. helped greatly. the only thing I did differently was, I taped the cameras with yellow tape before unscrewing them so the cameras wouldn't moved. It worked.
Thx a lot. It works nicely. The camera Module can take in place Not nessesary to demaunt it. Heat up battery 55degree. Heat up for the Display 85 degree in a Ofen. Works without any Problems. 45 mins
the max disessembly is at 17:24 but it doesnt show screen or dusplay replacement. it is a pure half disallesmbly video.
My phone screen freaking out how to deal please help
Don't need to take cameras out. Just unclip all the flat connectors.
The whole camera circuit board will come off.
Then we can UNCLIP the old screen flat connector from the main motherboard.
To put re-clip the flat connectors, under the the camera circuit board, simply line up the circuit board where it need to be. Then press down. All the flat connectors will go back to where they are supposed to be.
PS: put in the oven at 90deg for 10min. Easier to remove old screen with plastic triangle.
12:00 So the broken glass just magically came off and you had a clean surface that didn't need any adhesive?
No. You should preheat the screen before removing it
@@silentrepairs And what part of your video shows that? NONE
@@Rx7man none
@@silentrepairs exactly... you don't think that might be good information to have?