Easy Way to Tape an Inside Drywall Corner After Repairs and Skim Coat
Vložit
- čas přidán 1. 06. 2019
- In today's video, I show an easy way to tape an inside drywall corner after repairs and also some bonus footage of me skim coating a sheet of drywall. And if you stick around to the end of the video I show you how to mix the joint compound for perfect corners. I hope you enjoy!
Thanks so much watching and subscribing! -Paul
Feel free to ask about skim coating or any drywall repair questions you might have in the comments below?
If you're new to the channel? Please consider Subscribing to see more of my upcoming video's. 🔴 SUBSCRIBE for more useful Tips / @paulpeck
☑️Below in my Drywall and Painting Shop are all of the tools and products I used in my videos: ▶ www.amazon.com/shop/paulpeck
Here's Part 1- Diy Wallpaper Removal Nightmare- How to Fix it Like a Drywall Pro! • Diy Wallpaper Removal ...
Part 2- How to Skim Coat a Wall after Wallpaper Removal Step by Step Tutorial: • How to Skim Coat a Wal...
Part 3- Why I use FibaFuse Drywall Tape for Repairs vs Paper Tape for Corners
• Why I use FibaFuse Dry...
Part 4- How to Cover Your Ugly Damaged Wall with a Skim Coat- Looks Like Glass • How to Cover Your Ugly...
~~~~~~~~~~~~~~~~~~~~~~~~~~
More Helpful videos below!
~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's a couple of the Skim Coating Demonstration Videos:
*How to skim coat a wall in less then 10 minutes | Diy Drywall Tips and Tricks- • How to skim coat a wal...
Here's the entire Skim Coating over a textured ceiling Playlist Series: • How to skim coat over ...
Checkout my Never seen before super double dog secret diy skim coating tips and tricks CZcams Playlist: • Skim Coating Walls for...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's all of the videos from my Pro Painter Secrets Revealed Video Series:
Part 1- How to keep a Paint Brush Clean Trick- Pro Painter Secrets Revealed! • How to keep a Paint Br...
Part 2- What Primer do I use to Paint Over Texture? • What Primer do I use t...
Part 3- How to Never Have to Clean Your Paint Roller Again
• How to Never Have to C...
Part 4- Interior Wall Painting- Do you Roll First or Cut In First? Pro Painter Tips: • Interior Wall Painting...
Part 5- How to Roll Out a Wall Fast and Easy Like a Pro!
• Interior Wall Painting...
Part 6- Easily Cut in and What Brush to use when Interior Painting Fast like a Pro! • Easily Cut in and What...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Wednesday Walk-Through- Don't Make This DIY Drywall Mistake!
• Wednesday Walk-Through...
Torn Brown Paper on Drywall? Diy Drywall Repair Tips and Tricks
• Torn Brown Paper on Dr...
How to Repair a Ceiling Crack- Diy Drywall Repair Tips and Tricks
• How to Repair a Ceilin...
No More Dust from Drywall Repairs!!
• No More Dust from Dryw...
~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's the Part 1 of the Water Damage Repair Video Series where I show you how to access and dig into the water damage drywall ceiling and a water blistered wall
• Water damaged ceiling ...
Here's the Part 2 Video: How to cut out and install drywall on a water damaged drywall ceiling
• How to cut out and ins...
Part 3 Drywall taping and mudding a water damage ceiling repair and wall repair • Drywall taping and mud...
Part 4 Mudding and skim coating a drywall ceiling repair tips and tricks • Mudding and skim coati...
Part 5 How to repair texture on a water damaged drywall ceiling step by step • How to repair texture ...
Part 6 How to easily fix damaged drywall by skim coating
• How to easily fix dama...
~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's a couple of the Skim Coating Demonstration Videos:
*How to skim coat a wall in less then 10 minutes | Diy Drywall Tips and Tricks- • How to skim coat a wal...
#PaulPeck #DrywallTube - Jak na to + styl
I have been doing drywall (as a home owner) for 30 years. It has always taken me at least 5 coats with lots of sanding. Your skim coating video caught my attention a few months back. Your teaching technique is so clear and interesting that I’ve watch at least a dozen of them. I recently started to remodel a house. I am amazed at how much better, quicker and easier your methods are. You have turned me into a joint compound genie! Thank you!
I really appreciate your kind words and feedback Brian!💥👊🏻 This is what keeps me making these videos. Thanks so much for watching and subscribing my friend!😎 -Paul
I am a big DIYer & am pretty handy. I'm a good painter, but never have done skum coating, so excited about trying it. I 'm learning so much from watching your videos Paul, thank you!
Always good Paul! Great tips here, corners have been my nemesis but I see now what I was doing wrong. Thanks man!
Right on Chris!💥👊🏻 I’m stoked that my videos can help a fellow drywaller out!!!🔥 Thanks so much for your feedback and support! 🙏-Paul
Thanks for the great explanation and demonstration. Really clear and got me out of a repair jam.
#DrywallTube. Excellent. Good narrative without the bull. The right tips at the right time. I'm a pro painter since the late eighties and more and more get requests to do the repair work as well. Thanks, Thanks a lot!
Right on Brian!💥👊🏻 I really appreciate your kind words and feedback man!🔥 Thanks so much for watching and subscribing!😎 -Paul
I am doing exactly this task today... Lucky me. Thanks Paul
Love it Jay!🔥👍🏻 Let me know if you run into any questions along the way. Thanks so much for watching and subscribing my friend!😎 -Paul
Thank you for such a complete concise video Paul. As a professional car guy, the only thing I’ve avoided in 40 yrs is bodywork....at home.....drywall repair....practicing on my kitchen seems a good place for me to start....time to tackle my demons:-)
So glad my videos can help you get going on some of your projects!👍🏻 Thanks so much for watching and subscribing man!😎 -Paul
Love to see some outside corners
Here’s a video where I show how to install and finish some vinyl corner bead: czcams.com/video/Kl6uPml3zG0/video.html Let me know what you think? Thanks so much for watching and subscribing my friend!😎 -Paul
Great Pail ty for sharing
Hi Barbara!💥👍🏻 Thanks for watching and commenting my friend!🙏 -Paul
#DrywallTube
I'm a DIYer who only engages in this sort of home reno when I buy or sell a house, i.e. just a handful of times in a lifetime. I'm the kind of guy who won't call in the pros (sorry) if I think I can do a decent job myself. Last time was before the advent of CZcams and I thought I was a pretty handy guy, above average. Now I know better, lol. I was doing almost everything wrong resulting in me having to work harder and longer for sub-par results. I don't think I'll ever reach professional skills, but I will be able to hand over the house to the next owner and be proud of my work (and fetch a better price). Many thanks to you for taking the time to make and share educational videos like this!
I really appreciate your feedback Lars!👍🏻 I’m so glad my videos have helped you fine tune your drywall skills!💥 Thanks so much for watching and subscribing my friend.😎 -Paul
No wasted movements, the signature of a pro! Thanks Paul for another good one. #DrywallTube
Right on Gary!💥👊🏻 I really appreciate your feedback and kind words!🙏 Thanks so much for watching and commenting my friend!😎 -Paul
Great video i pretty much do it the same way but only tape on side of my corners then let it dry and do the other side
I've never repaired ceiling. The damages are exactly the same as your project. I learned a lot on this repair. I did not see how you put the sheetrock over head to screw the sheetrock itself.
I was a hospital-based medic back in the 80's. I always said that if you were good at drywalling, you had a career at the hospital. They were always remodeling some where, put a door here, remove a door there, room bigger, room smaller...They were amazing to watch. One day I seen them remove a doorway, and the mudding job was excellent. No need to touch anything up. The next day, I walked by it and the wallpaper was already up. Pro's...
Thanks 👍
#drywalltube thanks for this. Definitely helping with my home renovations.
#drywalltube
I am building my knowledge so that I will be ready to start when the moment comes. ☺
The two bathrooms will not wait much longer, but I don't have the money tonight, quite yet. In the meantime, I have been gaining excellent knowledge from your videos. Thank you!
\Bob
Wow! That’s great Bob!💥👊🏻 I’m so glad the my videos can help you tackle your projects. I really appreciate your feedback man! Let me know if you run into any questions along the way. Thanks so much for watching and subscribing!😎-Paul
Just came across this great video. Any tips on dealing with a wall that has crayon all over it? I just recently removed two old 1950 coats of wallpaper only to find crayon all over the drywall. Would the Guardz be good enough to mask the crayon?
I have about a 1 inch rectangle cut out I need to repair on a corner. How much tape would you apply for a small repair? Also, I always buy the premix all purpose, can I thin it up for this job? Just water?
Homeowner. Paul when you do second day coating the amount of mud to cover edge of paper only?
dry walling my ceiling in my kitchen with 2 right angle corners. Do i tape in the corner or no?
Great informative instruction. But how do you handle walls that are not flat straight but curve slightly.
Tear down the old & put new drywall? .
Thank you Samurai!💥👊🏻 Where is the curve on the wall? Could the curve be a poorly muffed tape joint? -Paul
Paul, should you use a setting compound to prefill the gaps or is all purpose compound ok to use? Your corners are perfect, nice work.
You could use all purpose, it may shrink as it drys. Most professionals use quick set because it don't shrink and sets fast.
Wow Paul, you make it look so easy. The motion that you use with the knife is so minimal. You don't touch it much. Know what I mean?
I really appreciate that Scott!🙏 Lots of practice my friend. Lots of practice...😅 Thanks for stopping by bro!👊🏻 -Paul
Why did the brand new wall need skim coated? Thanks for the tips.
Hi, I would like to know what type of joint compound would you recommend for small repairs at home.
Thank you
I would recommend USG all purpose joint compound with the dark green lid.👍🏻 I hope this helps. Thanks so much for watching and subscribing my friend!😎 -Paul
Hey Paul , I am a DIYer that just finished installing 40 feet of dry wall in my daughter's basement. Do I need to skim coat if I put two coats of a good primer on?
Paul, would this method be okay to use on old horsehair plaster corner joints also?
I'm also curious if you have think it would work well to tape "rectangles" around outlet boxes of those same old plaster walls, or if its not worth the hassle since it will be covered by plates anyway.
Hey Matt! Yes this should work on the plaster corners.👍🏻 And as far as the outlet I showed the perfect patch kit for your situation in this livestream: czcams.com/video/cSN0wZwxgGE/video.html I hope this helps.👍🏻 Let me know. -Paul
#DrywallTube. Enjoy it. I’m a handyman who is learning about drywall techniques and tricks. Thanks,
I appreciate your feedback Richard!👍🏻 Thanks so much for watching and commenting my friend!😎 -Paul
#Drywall thanks great video
I appreciate your kind words and feedback J!💥👊🏻 Thanks so much for watching and subscribing man!😎 -Paul
This house turned out to be a great resource for video content #DrywallTube
Hey Jayman!💥👊🏻 Yes It sure has...😅 I appreciate you watching and stopping by my friend!😎 -Paul
# drywall tube I’m a diyer just looking for a refresher on inside corners I hate them but I have not found a way to build a room without them yet I’m in the middle of a diy house renovation and I’m in a little bit to deep hopefully I can make it back out of this hole I dug to deep #drowning in my diy project
I appreciate your feedback Michael. Let me know if I can answer any questions you might have.👍🏻 Good luck with project. Thanks so much for watching and subscribing my friend!😎 -Paul
You see the hot new tool on IG those level 5 tools with long width trowels . Fun how years ago they would laugh at you for using wide trowels thinking you don’t know how to use a 12” knife .
Hey William!💥👊🏻 Yes, those big knives are cool for skim coating! I appreciate you watching and commenting my friend!😎 -Paul
#drywalltube hey Paul. I did a project with flat joints and got a lot of air bubbles and voids in my mud. Is that a knife problem or did I mix my mud wrong? Love your videos!
Thanks for the reply. It is an 8’x8’ repair filling in the hole where a built in entertainment center came out of the wall. All flat joints. Used mesh tape.
I appreciate that Lance!💥👊🏻 Was this on new drywall? Thanks so much for watching and your feedback!😎 -Paul
Only mesh tape when using 20, 45, or 90 minute mud right?
That’s right Carl.👍🏻 But don’t use the mesh for corners. Unless you’re in a pinch... I have a trick! Sounds like a good video!😉 Thanks for watching and commenting! -Paul
#drywall great job
I appreciate that man!💥👊🏻 Thanks so much for watching and subscribing!😎 -Paul
So first time doing a DIY.. I have a few large gaps do I fill with a lot of joint compound and cover with tape or screw a piece of drywall in..sorry hard to explain without photos brother..any help will do..
#drywalltube
drywalltube... of course i watch these vids..
Awesome!💥👊🏻 I really appreciate that. Thanks so much for watching and subscribing my friend!😎 -Paul
Your welcome.
👍🏻
Watching always re-affirms, that I DO know what I'm doing.
Lol. Drywalltube..
Hi Sherry!💥👊🏻 I have no doubt you know what you’re doing!!!💪🏻 Thanks for watching and commenting my friend!🙏 -Paul
# drywall tube. 😎
Yeah James!💪🏻 Thank you Sir!
#DrywallTube Ummmm, my corner doesn't look anything like yours😢🙄, where was this video two days ago?😂😂 Sigh, I need to redo the corner I did yesterday. I see where I went wrong : I didn't water down the mud enough and there were a couple of bumps here and there. I refuse to give up and will pull off the tape and try it again. Thanks Paul for this video. ☺️
Good for you Diana!💥👊🏻 Let me know if you run into any questions along the way. I really appreciate your feedback! Yes, thinning th joint compound should really make difference for you. Good luck! Thanks so much for watching and subscribing!😎 -Paul
@@PaulPeck , thanks Paul, it was a success after a couple more tries, SMH, but finally no bubbles, corner is defined, and I put a coat of mud on one side and will do the other side tomorrow after work. That corner kicked my butt, but I did it, thanks to your video. ☺️💞
#DrywallTube 👍
Right on man!💥👊🏻 I really appreciate your feedback and support!🔥😎 -Paul
👍
What's your opinion of corner trowels?
Hey Steve, I can make a nice corner with them!👍🏻 Here’s a video where I show how to use a corner tool: czcams.com/video/ZNT12zZZIc0/video.html me know what you think? Thanks so much for watching and subscribing my friend!😎 -Paul
Thanks Paul. I'm a general contractor and electrical contractor in L.A. area. I work by myself most of the time. I guess I could actually call myself a handyman because I find myself doing anything ftom a kitchrn or bath remodel to hanging a ceiling fan. I thoroughly enjoy your fown to earth approach with your channel. Unpretentious and very helpful even for someone like myself who has experience I still find it useful. Like tslking about work with a friend. I wish you much success with your endeavors.
#drywalltube love the vids
Looks good man. You know how they sell corner bead for outside corners! Do they sell a corner bead that goes on an inside corner? Just curious! Love the vids. 👍
Yep, Special Tape as well, strait flex is what I use, I don't like regular paper tape. But I only do repairs, and also always use spray glue
Thank you. I’ll check it out. 👍
1painter 4hire 👍thanks fir the info. 😃
The strait-flex insincere angle tape is what I would have recommended too 1Painter!👍🏻 I really appreciate you being active and helpful in the comments man!🔥 Thanks for watching and subscribing!😎 -Paul
Hey James, 1Painter is exactly right about the strait-flex corner tape.👍🏻 i appreciate you watching and commenting my friend!😎 -Paul
I assume the last coat is not thinned down
I appreciate that James. I should have mentioned that in the video. The second coat had been thinned just a little to remove any air pockets and make it nice and creamy!👍🏻 Thanks so much for watching and subscribing my friend!😎 -Paul
I hate drywall but I have to DIY because it’s hard to find anyone to come do it #drywalltube
#drywall
#DrywallTube
How would you go about fixing a 20 foot stairway wall corner that is slightly wavy because the Mexicans didn't do a great job the first time?
Hey Rick, if it was me I would remove that tape. Then make sure the drywall is attached good and any large gaps are pre-filled before retaking with paper drywall tape.👍🏻 I hope this helps. Let me know if you run into any questions along the way. Thanks so much for watching and subscribing my friend!😎 -Paul
drywalltube
Right on John!💥👊🏻
#drywalltube
Right on Victor!💥👊🏻 Thank you!
#drywall
#DrywallTube
#drywalltube
#drywalltube