Kev, a standard electricians socket screw is M3.5 and they're available upto 100mm in length. Unscrew one out of a socket or light switch and see if the thread is the same as you need
What an Epic build Kev 😱!!!! Loved the bench clips too. That hit in the grass was a bit rough 🙀🤣. My front RPM broke the second time out, but it was really my bad landing on a huge pipe from height. 34/34 gearing should work about perfect with the 800kv 👌. Just need another limitless spool gear for the spur, or you could fit 39/39. You're gonna love the M2C 7mm shock kit Brother. 🍻😎💪👊👊
Yup I did almost all those M2C upgrades on my Outcast 8s too, except for the steering stuff. I also added front and rear K8S EXB links and rear K8S shocks all around. It's a freaking BEAST now. I also replaced the diff cases in the front and rear diffs with aluminum Arrma ones. The plastic diff cases split apart.
@@aidenmaves5537 Aluminum is necessary in some key components like the diff cases and hinge pin retainers. It's just too much for the composite plastic to hold up to the torque on the diffs and the weight of the 30lbs trucks on those hinge pins. Plastics do work well on stuff like the control arms and shock towers though 👍
That was a cool parts upgrade. The 3.5mm bolt are the same as your electrical sockets around the house. So you can get double length plate screw from any decent electrical shop. Fun vid👍🏻
Yeah Kev try 34/39 or even 34/34 1:1 gearing, I run 34/39 with the same electrics Beefcaked out and it's good. Gives you more torque to correct with all that weight. Horrible landing mate exploded them Stock arms 😔😂😂 Let us know how them RPM ones do... Unfortunately no droop setting on them arms so guess "Pick your Poison" Then you will need either the EXB shocks off a breaker site or I would get the M2C ones about to come out. I just got a set to test 7mm, hardened, and 7075 ends💪.... Dudes are still killing the EXB ones... So that's what I suggest. I should have a video out soon on them. Shame all you have to do $$ to these 8s Rigs but once there right they are beastly. Side note, them HUGE batteries just asking for more weight Dammage. I personally don't go over about 6700mah in my big rigs especially off there M2Cified 💪 Bash on brother.... Great vid mate
Kevin, besides the car, I have learned something from you. I was just wondering How you use that drill on those screws without locking then so tight due to the power of the drill. thanks I like your video's
Freddy music at 2:42 lol. love the vid kevin its not easy to take apart and put those cars together the speed and accuracy you do it. Id love to know as much about rc cars as you.
Hey Kev, little Tip from a 1/8th scale buggy racer. We put a lot holes in the back of the spoiler. With that done the car is much better to control in the air. The chances to crash by a bad landing is much lower now. (Sorry for my bad English; greetings from Germany :) )
You get it to belch heaping amounts of smoke, and I'll send you as many American Flag stickers as it can hold! Love your stuff dude, keep up the good work
The chassis didn't look that bent to me🤔. It's amazing how you could easily get fitting upgrade parts for this model🤔. I thought you had to use modeling adhesive with the screws also, for better construction🤔. I usually lubricate any moving parts with CRC and top grade machine oil. This also allows for smoother performance, increased speed and handling, gear performance, and less friction and overheating potential. I'm not experienced with pulling things to pieces and assembling, building from scratch though🥴. I have a lazy streak, thats hard to conquer😖. I just like things to happen quickly, with little fuss. But I admire your skill and ability here. I don't think its necessary for rc vehicles to go so fast though🤔. Around 60klm is plenty I think, just to enjoy racing them. When they go too fast, I don't see the point, when they just shoot off into the distance🥴. It's all relative really. Eg. Going faster, accidents are just as fatal with an upgrade, as it is having an accident without the upgrade. What we have to remember is, that the original manufactured model, is specifically designed to be adequate for the max speed it does🤔
kev's craziness is concerning yet entertaining. Glad he actually works on and upgrades his rc's. Even fabricates things to make it work. Thats how you rc!
Be good if Kev did a "how to make your own 7075 bash bar" vid. You can buy sheet 7075 ali, drill, saw, clamp etc. all in for less than an M2C chassis AND learn some metalworking skills in the process!
Omg that thing is built to beat that kids height record. 100mph easy with that set up. Looks so good with the polished aluminum. Tim the tool man Taylor would be grunting.
Does conservation of angular momentum apply when rotating the wheels say, in the opposite direction the car is tilting while mid air? If so is that what is allowing for what looks to be small amounts of in flight angular adjustment to the vehicles tilt?
exactly what I was thinking, very noticeable in some of the jumps. I know air braking is a thing in Trackmania.. Didnt know it was a thing in real life tho :o
oh my gosh, what a nightmare having to screw with that chassis for those that just wanna bash and drive around when they have so very little free time after work and family obligations. I cant imagine having to replace all that after such a short period of time. Not to mention having to spend even more money.
After Kev does all the hop ups to the EXB series from Arrma. What is still left stock and would it be cheaper to start from scratch with upgrade parts and build your own. I want a Kraton but wonder if I should build one from upgrade parts?
You need a 39/39 gearing and the frond and rear diff 500.000 oil and the middle silicone earplugs. It's a perfect combo with this motor and ESC (i have exactly the same setup and it's a BEAST!)
you should really hae a tap and die set, much better than just drilling those holes, or if you are cheap have a long screw of that pitch and cut a couple of channels down the thread, the channels will alow some material to escape. you could also make any screw you need of any thread pitch so you wouldnt have issues like with not finding a long enough screw
Hey guy! Am new to your channel. As a child I was fascinated by small remote controlled toys and at a point I even built one or two myself to play with. But watching your channel now brings back long recessed memories of my childhood! Thank you for that! So, I have an idea for you! Since it's normal for you to launch you rc's into the sky! You can morph a small quadcopter to the sides so whenever you launch you will have a control descent! What do you think?
epic! Can't wait to see how it performs with that servo and some better arms/shocks. arrma can not make 8s arms lol... you'd think they would start copying rpm by now haha
How did you get the dumborc to work also I have basically a d99 rc I'm putting said receiver in I have a working Winch I have added but in order to do it I need to put a separate esc in
That thing's like an abused puppy. You kick it around the garden, send it halfway to orbit and it still comes running back to daddy even though you're trying to kill it! And then you break its leg. Poor sod.😂😂
Kev, if you are ever in desperate need of a longer M3.5 then buy a plug socket face plate screw from somewhere like Screwfix. Yes, they are a slot head but as a temp it may do and they come in different lengths.
Maybe you need a parachute on the car protect it on landing after the jump. It would be impressive if you could jump the first ramp, land on the roof of the building before taking a second jump off the building.😳
I could use the old ones!if you have any of the things that you replaced like the stock motor and ESC from the outcast or kraton or x Maxx I would love to use them!!! please??!
Boom
BOOM!!
@@KevinTalbotTV BOOOOOOOOOOOOOOOOOOOOOOOM!!!!!!!!!!
@Gabriel hello my friend
@@vicsarnaudov3486 BOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@@TanFrX BOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM!!!!!!!!!!!!!!!!!!!!
Kev, a standard electricians socket screw is M3.5 and they're available upto 100mm in length. Unscrew one out of a socket or light switch and see if the thread is the same as you need
So satisfying to watch! 😃🙏🏾❤️
Yeah
Oh wow it’s you!
OMG Verblase, I didnt know you watched this
Why is u on here. Edit: thanks for the like it’s my first
Wait verbalase!?!
You should put “It’s Christmas Every Day” on a t-shirt
Yes
That would be really cool with the xmax or the raminator in the background
Yes
that is a good idea i will buy it if it is available
I know carnt stop saying it to my mate when my spares arrive 😁
I think you can now say that kev is basically a pro at working on rc cars he could own a whole hobby shop
Nah
I think Kev should make a new video series of opening posts cause its so satisfying.
That may spoil future vids though
True but package opening is satisfying to
2:45 *Music plays*. Memories come back from 2014
I was to say that XD
Finally the full vid is here
Glad it’s not just me who got inpatient
@@adambg02 I was not inpatient I was just saying
@@faisalalradwan5874 finally makes u seem impatient?
I feel like I've seen this video, and it sucks cuz all the good parts are spoiled. Only the boring parts are new
@@notacti actually ya it does makes me fell impatient
What an Epic build Kev 😱!!!! Loved the bench clips too. That hit in the grass was a bit rough 🙀🤣. My front RPM broke the second time out, but it was really my bad landing on a huge pipe from height. 34/34 gearing should work about perfect with the 800kv 👌. Just need another limitless spool gear for the spur, or you could fit 39/39. You're gonna love the M2C 7mm shock kit Brother. 🍻😎💪👊👊
Thanks rich! yeh deffo needs gearing up ill get a limitless spool :) thanks dude!! yeah cant wait for the shocks :)
Imagine humans that scale , going to work would be epic
keV, 3.5mm screws are standard socket and switch faceplate screws
Anybody else love seeing Kevin build rc cars like this?
No
Yep
Yup I did almost all those M2C upgrades on my Outcast 8s too, except for the steering stuff. I also added front and rear K8S EXB links and rear K8S shocks all around. It's a freaking BEAST now. I also replaced the diff cases in the front and rear diffs with aluminum Arrma ones. The plastic diff cases split apart.
Nice
@@aidenmaves5537 Expensive but worth it. It's a flying tank. Now I'm waiting for the M2C beefcake driveshafts, which would make it war ready 🤣
@@joseCalderon1976 Ya lol. Id think all plastic parts would be best cause they can bent right but idk havent bought them
@@aidenmaves5537 Aluminum is necessary in some key components like the diff cases and hinge pin retainers. It's just too much for the composite plastic to hold up to the torque on the diffs and the weight of the 30lbs trucks on those hinge pins. Plastics do work well on stuff like the control arms and shock towers though 👍
That was a cool parts upgrade. The 3.5mm bolt are the same as your electrical sockets around the house. So you can get double length plate screw from any decent electrical shop. Fun vid👍🏻
What kind of oils do you put in shocks jumping that high? Or doesn't matter coz it's gonna bottom out anyway.
I love how Kev uploads great videos so reguarly
2:01 can u please try that whit an m2c chassis
Challenge : singing "it's Christmas everyday" with each time a different melody
Noice idea!!!
Challenge: Next wrenching unplugged… no electic tools…
But will he accept the challenge 🤔 let's hope
@Mike Dee maybe stupid but more likes than all the respect people have for you
Yeah Kev try 34/39 or even 34/34 1:1 gearing, I run 34/39 with the same electrics Beefcaked out and it's good. Gives you more torque to correct with all that weight. Horrible landing mate exploded them Stock arms 😔😂😂
Let us know how them RPM ones do... Unfortunately no droop setting on them arms so guess "Pick your Poison"
Then you will need either the EXB shocks off a breaker site or I would get the M2C ones about to come out. I just got a set to test 7mm, hardened, and 7075 ends💪.... Dudes are still killing the EXB ones... So that's what I suggest. I should have a video out soon on them.
Shame all you have to do $$ to these 8s Rigs but once there right they are beastly.
Side note, them HUGE batteries just asking for more weight Dammage. I personally don't go over about 6700mah in my big rigs especially off there M2Cified 💪
Bash on brother.... Great vid mate
Damn I can’t believe that rear arm shattered like glass! But that chassis is tough as nails👍😎
Kevin, besides the car, I have learned something from you. I was just wondering How you use that drill on those screws without locking then so tight due to the power of the drill. thanks I like your video's
Kev's video makes my day!! it's feel like ITS CHRISTMAS EVERYDAY ❤️
Freddy music at 2:42 lol. love the vid kevin its not easy to take apart and put those cars together the speed and accuracy you do it. Id love to know as much about rc cars as you.
Fun fact: This motor reminded me of the McLaren's Formula E motor. Maybe twice that size. 5kW/kg.
Hey Kev, little Tip from a 1/8th scale buggy racer. We put a lot holes in the back of the spoiler. With that done the car is much better to control in the air. The chances to crash by a bad landing is much lower now. (Sorry for my bad English; greetings from Germany :) )
thanks😊
You get it to belch heaping amounts of smoke, and I'll send you as many American Flag stickers as it can hold!
Love your stuff dude, keep up the good work
12:34 LOL love watching your videos!
The chassis didn't look that bent to me🤔. It's amazing how you could easily get fitting upgrade parts for this model🤔. I thought you had to use modeling adhesive with the screws also, for better construction🤔. I usually lubricate any moving parts with CRC and top grade machine oil. This also allows for smoother performance, increased speed and handling, gear performance, and less friction and overheating potential. I'm not experienced with pulling things to pieces and assembling, building from scratch though🥴. I have a lazy streak, thats hard to conquer😖. I just like things to happen quickly, with little fuss. But I admire your skill and ability here. I don't think its necessary for rc vehicles to go so fast though🤔. Around 60klm is plenty I think, just to enjoy racing them. When they go too fast, I don't see the point, when they just shoot off into the distance🥴. It's all relative really. Eg. Going faster, accidents are just as fatal with an upgrade, as it is having an accident without the upgrade. What we have to remember is, that the original manufactured model, is specifically designed to be adequate for the max speed it does🤔
Arrma = aftermarket tough! Spend the price of the car again to get something nearly useable.
Traxxas = out the box ready to race! Tough as anything 👌
Except the erevo. That things glass
@@andyvannort2743 ya🤣 it may look tough but its not
The sound you put when you break stg is absolutely epic!!
kev's craziness is concerning yet entertaining. Glad he actually works on and upgrades his rc's. Even fabricates things to make it work. Thats how you rc!
at this point M2C racing is making like half of their sales just on Kev.
Be good if Kev did a "how to make your own 7075 bash bar" vid. You can buy sheet 7075 ali, drill, saw, clamp etc. all in for less than an M2C chassis AND learn some metalworking skills in the process!
And the rest
Fr tho
@@Slimboid it's far from that simple and no the materials and tooling will cost more than buying it from m2c
@@raynman6466 I'm not talking CNC quality here. A strip of 7075 between the diffs, bolt spacing reference from a paper tracing. It is that simple.
YOU ARE SO COOL KEV I LIKED YOUR ALL VIDEOS. YOU ARE LIKE A GOD OF RC'S
1:25 aah I see what you did there bc arrma fans are missing some salt
Omg that thing is built to beat that kids height record. 100mph easy with that set up. Looks so good with the polished aluminum. Tim the tool man Taylor would be grunting.
Lol hey I use those expensive dewalt hammers like that also.
Kevin. From where did you buy the arrama limitless clear body shell .
Can please please say
Anyone who wants a armma just buy the body shell and go to m2c for the rest of it lol
Does conservation of angular momentum apply when rotating the wheels say, in the opposite direction the car is tilting while mid air? If so is that what is allowing for what looks to be small amounts of in flight angular adjustment to the vehicles tilt?
exactly what I was thinking, very noticeable in some of the jumps. I know air braking is a thing in Trackmania.. Didnt know it was a thing in real life tho :o
You need a “WHAT HAPPENED” shirt with random broken RC parts on it!!!!
can i suggest to use bosch battery screwdriver, they had a very fine and precise clutch! they can handle little screw very good!
oh my gosh, what a nightmare having to screw with that chassis for those that just wanna bash and drive around when they have so very little free time after work and family obligations. I cant imagine having to replace all that after such a short period of time. Not to mention having to spend even more money.
And he breaks it just minutes after putting it together... ..makes no sense to me and laughs abt it
I don't even play with RC but you had me at the "Dewalt" torque wrench/hammer combo.... big ole thumbs up..
Kev, how’d the driver handle it? I had a woman back into my truck and try to blame me because my bull bar sticks out on the front?!
Thats one clean looking build. Except for that one gasket that your shop vac ate
him replacing the stock body of the rc sounds is just to satisfying.
After Kev does all the hop ups to the EXB series from Arrma. What is still left stock and would it be cheaper to start from scratch with upgrade parts and build your own. I want a Kraton but wonder if I should build one from upgrade parts?
3.5mm screws are faceplate screws go to any electrical shop and they will have a large selection any lenth pretty much 😀
Fresh. Love the M2C braces.finger bonkin the hole lol. Has anyone ever hit that brick building off the moon jump before.
You need a 39/39 gearing and the frond and rear diff 500.000 oil and the middle silicone earplugs.
It's a perfect combo with this motor and ESC (i have exactly the same setup and it's a BEAST!)
You should do a build that’s the most protected, like waterproof electronics, metal parts, and built for all seasons and all terrains
WoW!! What a HUGE difference. Such a BEAST now
This was a complete rebuild
Did enjoy watching it
These videos remind me of me and my friends breaking stuff and putting it back together
LOL poor Andy😂😂😂 it seems like they hit the wrong part😂
物理定律，改裝後的車雖然有更大馬力，更強骨架，但重量相對提高，輪胎爪地力亦更快超過極限，所以車只能在值路加快，一轉彎便告打滑失控，所以圈速沒能加快，改的只是浪費金錢
建議改用碳纖輕量化組件，不用改電機及電池，亦能加快速度及其過彎性能
由於整車質量輕了，原裝的骨架組件亦有效加強抗沖擊
All I could hear was the f1 podium celebration haha😂
1:25 salty gameover 😂
im pretty sure m3.5 are standard socket/light fixing screws, should be able to get them in their 100s from screw fix
M3.5 screws are what sockets and switches are screwed back with and come in various lengths
Hey Kev, how come you need 4 impact drivers/Ugger-Duggers?
you should really hae a tap and die set, much better than just drilling those holes, or if you are cheap have a long screw of that pitch and cut a couple of channels down the thread, the channels will alow some material to escape. you could also make any screw you need of any thread pitch so you wouldnt have issues like with not finding a long enough screw
Put this motor power to front wheels so it will not lift up from front
Nice work😍
what do you do with the bent chassis? im wondering what u do...
What do you recommended upgrades for ARRMA Truck 1/5 KRATON 8S like gears or some good stuff ..thanks
M3.5 pins are the same ones for Electrical Sockets check out Screwfix etc
m3.5 is standard for UK plug sockets and switches, any electrical supplier will have them, keep a stock mate!
11:48 the music goes perfectly with the scene
I'm bored so I'm just rewatching all of Kev's videos🤣
LOL Kevin is like a honey badger.. “he don’t care” 🤣
All boilermakers loving the 10.8v hammer.
Kevin You should put the motor in xmaxx it would be an absolutely beast
Can u make complete
metal casted Diy Rc car 🥰🥰
It will be a really good video
You should try an put a heatsink and fan on the motor if you can fit it. Always helps mine stay cool and longer run times.
I run a 39-46 gear ration for bashing and a 25-25 belt drive for speed running.. for xmaxx and outcast 8s. Good stuff kev!
Hey guy! Am new to your channel. As a child I was fascinated by small remote controlled toys and at a point I even built one or two myself to play with. But watching your channel now brings back long recessed memories of my childhood! Thank you for that! So, I have an idea for you! Since it's normal for you to launch you rc's into the sky! You can morph a small quadcopter to the sides so whenever you launch you will have a control descent! What do you think?
Im a old e-revo driver and put a castle mamba monster 2 combo in it. Man its sick. Also a 2wd slash and wondering if there is any must do upgrades?
For M3.5 screws go to electrical wholesalers they are socket screws
Christmas music...
In mid summer...
Right
epic! Can't wait to see how it performs with that servo and some better arms/shocks. arrma can not make 8s arms lol... you'd think they would start copying rpm by now haha
Christmas everyday here too ,I call postal service job security 😁😂😂
M3.5 screws are the same as UK sockets and switches. You can buy up to 70mm
3.5 screws you can get them from Electrcail shop the same as plug socket screws
This is a very satisfying build
That's the way to film a rebuild! All high speed with power tools, and good lighting, photography. Promoting PPE too as well done Sir👍
How did you get the dumborc to work also I have basically a d99 rc I'm putting said receiver in I have a working Winch I have added but in order to do it I need to put a separate esc in
the classical music just makes it THAT much better XD
That thing's like an abused puppy. You kick it around the garden, send it halfway to orbit and it still comes running back to daddy even though you're trying to kill it! And then you break its leg. Poor sod.😂😂
Turn up the BEC on your speedo. It can be set to HV and the stock servo comes to life!!
39/39 is the go to for that motor. Slap some 40mm fans on there and go 39/34
Honest title=transforming an rc to support a huge motor
When you are with your friends on a race track or in the park is my favorite part of the video 🤪😜😋👍🇸🇮 greetings from sLOVEnia europe
LMAO THE LOCATION "BOLLOCKS"
Kev, if you are ever in desperate need of a longer M3.5 then buy a plug socket face plate screw from somewhere like Screwfix. Yes, they are a slot head but as a temp it may do and they come in different lengths.
Maybe you need a parachute on the car protect it on landing after the jump. It would be impressive if you could jump the first ramp, land on the roof of the building before taking a second jump off the building.😳
You have two option, a jdm personalised build of a Skyline R34, or see this guy's rc cars, which are closely as complex as a V-Tech engine
those w
renching videos are so good!
Could also drill that servo out and tap it for 4mm, then you can more easily find screws that fit it.
3:19 that song brought back so many memories.
thats is BOOM!!...but would like to know the banggood special power wagon...how it does now...
I could use the old ones!if you have any of the things that you replaced like the stock motor and ESC from the outcast or kraton or x Maxx I would love to use them!!! please??!