How to Replace Front Rearward Subframe Bushing 2008-2013 Nissan Rogue

Buy Now!
New Subframe Bushing from 1AAuto.com 1aau.to/ia/1ASF...
This video shows you how to install a front rearward subframe subframe bushing on your 2008-2013 Nissan Rogue.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Pry Bar 1aau.to/oRU/1AX...
• 20mm Wrench
• 12mm Socket 1aau.to/obpw/1A...
• 18mm Socket 1aau.to/oaef/1A...
• 21mm Socket 1aau.to/oaef/1A...
• Bushing Removal Tool
• Air Chisel 1aau.to/obx/1AX...
• Ratchet 1aau.to/obwZ/1A...
• Socket Extensions 1aau.to/obpw/1A...
• Torque Wrench 1aau.to/oaAW/1A...
• Anti-Seize Grease
• Chisel 1aau.to/oku/1AX...
• File
• Hammer
• Pole Jack
Subscribe: / @trq
Check out our playlist:
Nissan Rogue 2008-13 1st Generation: • Nissan Rogue 2008-13 1...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@jondoe4667]

To remove mine I used a ball joint press and pressed them out with a socket that had a matching outer diameter as the bushing. It worked well. 👍

[@LATiNSkILLZ]

is it necessary to add additional support to the motor or is it supported with additional supports when you remove the subframe

[@murrayndumba3290]

What's the part number of the install tool and where do you buy it from