Hi. What a fantastic job you have done with this machine. I own an old 29k myself, and it seems to have a minor fault. Would you mind looking at the video of the machine on my channel to see whether you could advise me how to fix it? Many thanks in advance
Thank you! Hard to tell from far. Its normal for the wheel to spin not perfectly round because of the shape, but the play of it is pretty big. Maybe the screw is to loose or the arbor could be bend or something with the flange of the arbor. Is the excentric bobbin thread winder adjusted to the highest point?
Is there a good website or book for singer 29 restores? For instance, for information like what different models there are of the Singer 29 and what parts they need etc. Thanks in advance. :-)
Hey man! I want to ask you if you can make a video about the timing on this singer 29k51, I have some trouble figure it out and I can't find any info about issue. Thank you and great job!
The timing of this machines is determined by the wheels on the arbor. This wheels are hold by pins. Timing can be off , when you put the wheels back in and they are reversed. Then the pins shouldn't fit right. If you didn't work on the wheels, there might be a chance someone experimented with screws instead of pins and now the wheels are tilted and produces wrong timing. With the bobbin timing I don't know if its possible to mess that up. Maybe there is also a misaligned screw under the bobbin. Also maybe the hook isn't sharp anymore and can't catch the top thread properly.
weißt du wo man gute Ersatzteile für die K29 Modelle kriegt? ich hab eine da macht sie nicht den ganzen weg bei der stichlänge. also die Stiche sind zu klein bei der größten Einstellung, hast du ne Idee woran das liegt? vielen dank für die tollen Videos.
college-sewing co uk hat die meisten Teile erhältlich. Man muss aber beachten dass die Teile vorwiegend für die Singer 29k-71 konzipiert sind. Bis zur 29k-71 haben sich manche Teile verändert in Bezug auf Form und Maß. Es gibt bestimmt Teile die mit äteren Modellen nicht zusammen passen. Von deiner Beschreibung her, würde ich dir das Ersatzteil namens "FEED MOTION BELL CRANK LEVER SINGER 29K" empfehlen. Sollte es nicht wie das alte Teil passen, musst du es ein wenig feilen. Dann geht das in Ordnung.
The timing of this machines is determined by the wheels on the arbor. This wheels are hold by pins. Timing can be off , when you put the wheels back in and they are reversed. Then the pins shouldn't fit right. If you didn't work on the wheels, there might be a chance someone experimented with screws instead of pins and now the wheels are tilted and produces wrong timing. With the bobbin timing I don't know if its possible to mess that up. Maybe there is also a misaligned screw under the bobbin. Also maybe the hook isn't sharp anymore and can't catch the top thread properly.
@@Baerenson Google "Drake Off Road Gear Wrench 80066 20 Piece Master Dual Material Screwdriver Set" or "ZEBRA Multi Screwdriver Assortment" They are available online
leaving this machine soak in diesel could relieve the disassemble process less friction on the screws and moving parts that where tight stuck because of the thickness of the heavy oil used!
These machine are very useful, but there are so many of them, there shouldn't be any concern for any damaged history. If it was a machine in perfect condition or a rare model I wouldn't say that, but in this case it's really no big deal.
I've just bought a much more rusted model like this, so I'll be here often. Thanks for sharing this
Hope the videos will help you
Great can you please tell me how much it costs ?
Thank You one again Baerenson for your close up camera work showing the mechanism of this fantastic machine👍. Cheers Tony
These detail shots are extremely helpful! Thank you so much vor this vid!
Мастер-ломастер. )
Thank you so much for posting this series of videos. Very, very useful. Cheers!
Thanks for posting this series. I have a 29-72.
Thanks a lot ! I just purchased a 29K71 last week.
Me too!
Hahaha. Love your outbursts and comments to yourself :) Impact driver!
ขอบคุณ ❤️🔥❤️🔥🙏🙏🤩🤩👍👍
Such complex and precise engineering. An amazing machine.
f
👍❤️
How I love my Dremel,this is what I will doing soon to my 29k 51 after I finish the 95k.
I love the commentary!
“Relief! But no light!” Lol
Precious piece .
Hi. What a fantastic job you have done with this machine. I own an old 29k myself, and it seems to have a minor fault. Would you mind looking at the video of the machine on my channel to see whether you could advise me how to fix it? Many thanks in advance
Thank you! Hard to tell from far. Its normal for the wheel to spin not perfectly round because of the shape, but the play of it is pretty big. Maybe the screw is to loose or the arbor could be bend or something with the flange of the arbor. Is the excentric bobbin thread winder adjusted to the highest point?
“Impact driver!” 😂
Esse pino da barra de agulha q entra na grade superior tb e diferente da minha 51 o meu não atravessa e tem um parafuso iqual o seu
Ich werd auch grad n psychiatriefall beim auseinandernehmen meiner maschine.😂 aber super video, danke!
I'm looking for needles for my 29k58,got it from a shoe cobbler 25 yrs ago and just broke my last needle..so bummed.
Is there a good website or book for singer 29 restores? For instance, for information like what different models there are of the Singer 29 and what parts they need etc. Thanks in advance. :-)
Hey man! I want to ask you if you can make a video about the timing on this singer 29k51, I have some trouble figure it out and I can't find any info about issue.
Thank you and great job!
The timing of this machines is determined by the wheels on the arbor. This wheels are hold by pins. Timing can be off , when you put the wheels back in and they are reversed. Then the pins shouldn't fit right. If you didn't work on the wheels, there might be a chance someone experimented with screws instead of pins and now the wheels are tilted and produces wrong timing. With the bobbin timing I don't know if its possible to mess that up. Maybe there is also a misaligned screw under the bobbin. Also maybe the hook isn't sharp anymore and can't catch the top thread properly.
Doing one myself... man you saved me some headaches!
Can't decide if I repaint or leave the patina
Thanks.
weißt du wo man gute Ersatzteile für die K29 Modelle kriegt?
ich hab eine da macht sie nicht den ganzen weg bei der stichlänge. also die Stiche sind zu klein bei der größten Einstellung, hast du ne Idee woran das liegt? vielen dank für die tollen Videos.
college-sewing co uk hat die meisten Teile erhältlich. Man muss aber beachten dass die Teile vorwiegend für die Singer 29k-71 konzipiert sind. Bis zur 29k-71 haben sich manche Teile verändert in Bezug auf Form und Maß. Es gibt bestimmt Teile die mit äteren Modellen nicht zusammen passen. Von deiner Beschreibung her, würde ich dir das Ersatzteil namens "FEED MOTION BELL CRANK LEVER SINGER 29K" empfehlen. Sollte es nicht wie das alte Teil passen, musst du es ein wenig feilen. Dann geht das in Ordnung.
@@Baerenson vielen dank für die ausführliche Antwort. das werde ich mir gerne mal ansehen.
what camera do you use?
I have an Nikon D7200. Often use an vintage Tamron Aspherical 28-80mm Lens for wide shots.
Deseo adquirir esta maquina..... alguien que pueda vendermela????
I was shouting at my phone 'the pin, the pin!'
venden repuesto para máquina 29 k 58
Your hilarious
I'll take it
I need a "TIMING KIT" for Singer 29K70 "PARCHING MACHINE"
The timing of this machines is determined by the wheels on the arbor. This wheels are hold by pins. Timing can be off , when you put the wheels back in and they are reversed. Then the pins shouldn't fit right. If you didn't work on the wheels, there might be a chance someone experimented with screws instead of pins and now the wheels are tilted and produces wrong timing. With the bobbin timing I don't know if its possible to mess that up. Maybe there is also a misaligned screw under the bobbin. Also maybe the hook isn't sharp anymore and can't catch the top thread properly.
If you had a better quality screwdriver that had a wider blade it would be less likely to damage the larger screw heads,
Yes I need those. Don't know where to get them yet.
@@Baerenson Google "Drake Off Road Gear Wrench 80066 20 Piece Master Dual Material Screwdriver Set" or "ZEBRA Multi Screwdriver Assortment" They are available online
leaving this machine soak in diesel could relieve the disassemble process less friction on the screws and moving parts that where tight stuck because of the thickness of the heavy oil used!
Versão portugues
Eu tenho uma dessa 29k 51 .
Esse pezinho aí não é original dela .
Great video , but if you worked as fast as you flap your chops,,,,, the strip clean and rebuild would be over in one video lol ;-)
I feel sad and angry to see you damaging elements of this beautiful machine, part of history and precious heritage, lacking care and professionalism.
These machine are very useful, but there are so many of them, there shouldn't be any concern for any damaged history. If it was a machine in perfect condition or a rare model I wouldn't say that, but in this case it's really no big deal.