Making a Rotary Weld Positioner Table
Vložit
- čas přidán 13. 11. 2020
- I have wanted to make a rotary weld positioner table for some time now. TIG welding all those valves up a couple of videos back was the last straw. So here it is.. Making a rotary weld positioner table. The weld positioner woks by allowing you to keep the torch welding torch in a single location and rotating the job around. This makes getting a more uniform weld much easier ... once you get the hang of it. I used an old face plate to make table for the rotary weld positioner and drove it from a 12v DC windscreen wiper motor via a chain drive. The rotary table is variable speed so that different size welding jobs and different welding processed can be accommodated.
Some of the parts I used. Amazon associate links.
Power Supply - amzn.to/3sy7BrZ
Remote foot switch - amzn.to/3qpJJF5
PWM Speed controller - amzn.to/39x2cJa
Large gear - amzn.to/3svnm32
Drive chain - amzn.to/3qvet7T
If you like the videos I make then please consider sharing them with your friends. There is a share button just below the video viewer. It's got loads of options for easy ways to share a link. This REALLY helps the channel to grow and enables me to bring you more videos.
For more information and behind the scenes content be sure to check out my socials
Facebook: handmadeextreme
Instagram: handmade_extreme
If you would like to make a contribution to the channel then I also have a Patreon page.
www.patreon.com/handmadeextreme
Cheers,
Rob
- Handmade Extreme -
Disclaimer: This video is meant for educational and entertainment purposes only. It is in no way meant to be a set of instructions and therefore no attempt should be made by any party to recreate what has been seen or heard in this video. Any attempt to do so is done completely at your own risk. - Věda a technologie
A rotary table really makes tig welding a breeze on circular welds. A very nice and neat way of making the table too.
Thanks for the continued support. It's been well worth it, very glad I went to the effort of making it.
@@Handmadeextreme I have to say you really look at the whole picture from start to finish. This type of foresight makes the end products second to none. If I get an idea for you to try I will most certainly pass it on to you Sir. Good day and peace too. VF
And just like that you created a sprocket like it was nothing! Fantastic stuff! Really like the video!
haha, thanks. Glad you enjoyed it.
Such a cool design! Great use of old parts to make it unique.
I must say, this was a wonderful video! Very informative and explained every step...you've got a gift!
Fantastic video. I enjoyed every moment of it. I first watched the episode on your fly-cutter and thought, "Gee, he really could use a rotary table for welding", and lo & behold, there it was. Functional, good looking design, well thought out and interesting. Hats off!
So good! No steps left out. That is a proper video! Thank you
Glad you liked it!!
Very nice build sir, your attention to the little details makes all the difference at the end of the project. thanks for sharing the build.
Very cool. I've been thinking about making a turntable for years. This video has inspire me to do it.
Great work!
the way you made that sprocket was brilliant! Nice job. I've got a similar table from an old drill press I've been saving for a rotary table and will be following your lead. Thanks!
Thank you. Glad you enjoyed it and good luck with your own project.
Fantastic project !
Nicely done.
Beautiful!
this is what i like [n this channel. no music and it is well explained what is going on during the build
Good job there Ol' chap!
I like that enough that I'm going to use a lot what you did to create my own rotary table.
You are explaining your work
Thank you
great project , thx for sharing
Good bit of work. Enjoyed the narration. Thanks
Thank you. The voice over is probably the bit I struggle with the most. Glad to hear that it is worth the effort and you are enjoying it. 👍
Great built. Damn, now I want one.
Thank you. Glad you liked it.
Great video! Thanks for sharing your humour
Good show. Interesting to watch as well.
Nice work. I love it.
Great job
Overbuilt, love it.
Absolutely. Glad you enjoyed it. 👍
Beautiful work, especially on that sprocket!
Love how you integrated the gas bottle into the whole design.
Great to hear from you again. I really like the curved top... I found myself having a 'designer' moment haha.
Thanks for the support.
@@Handmadeextreme Careful, those Designer moments can lead to all sorts of trouble.
Excellent vid! Liked the engine turned finish. Sweet!
Thank you. Love the profile picture by the way!
Nice build, Thanks for shearing.
Cheers, glad you enjoyed it.
Great video, great use of odds and ends that you would find around your workspace
Thank you. Glad you enjoyed it.
Looks like just the job to weld together a 2t expansion chamber.... 😎
Great work!
Hey up me ode fruit. You know where it is.. 👍
Great Video! I'm envious of your design and practical skills.
Thank you. Glad you enjoyed it.
Awesome video. Thanks for posting it.
Glad you enjoyed it!
Very well built
Thank you.
And she can stack dimes better than me 😅. Love how it looks sorta retro ish, like that bloke Old Tony's. Seven shooter...😊 Thanks for another great video.
Handmade Extreme That is one impressive Weld Positioner Table! Great Job!
Thank you very much!
Nice work
Great Job !!
Thanks.
Nice work, every home should have one!
haha thanks. Glad you enjoyed it
Fantastic!!!
Many thanks!
Nicely done. Thanks for the video.
Cheers, thanks for watching.
Oh god, you are on another level, by three orders of magnitude... GJ
Thank you so much. That's very kind of you. 👍
This was really interesting. Even if I never make this gizmo, I learned numerous tricks.
Thanks, glad you enjoyed it.
Wow that is impressive
Nice project and excellent informative commentary.
Thank you kindly!
Again great work!
I appreciate that. Many thanks.
Nice job and well finished off
Thank you. Glad you enjoyed it.
Wow awesome.
What a beauty of thought and execution.
Well done
Thanks a lot 😊
Bravo!! great job for the video and the idea of the unit your built!
Thank you very much!
Very nice! Enjoyed every second
Glad you enjoyed it!
I recommend an adjustable rest handle for your hand the is holding the torch that can get close to the area you are welding. A steady hand is important for continuous, repeatable welds.
Great idea, thanks.
You are some boy 😎 Incredible ingenuity. Thoroughly enjoyed the build 🤜🤛
Thanks very much. Glad you are enjoying the channel.
Amazing display of skill :) Great video
Nicely done. Thank you.
Thank you, glad you enjoyed it.
Very nice design and work.
Very very well presented and extremely concise. 😎.
Thanks.
Thank you. Glad you enjoyed it.
Absolutely fantastic job
Thanks very much, glad you enjoyed it.
extreme well done, finished up to paint and polishing ... really amazing!! I liked to look :-)
Thank you. Glad you enjoyed the video, I have been using it today.
Brilliant piece of work well done
Thank you so much 😀
Excellent!!!!
excellent job
Thank you very much!
Excellent work young man!
Thank you very much. Glad you enjoyed it.
Very nice great job 👍👍
Great stuff!! Definitely worth it
Thank you.
Beautiful Job.
Thank you!
Good job mate, well done 👍
Thank you! Cheers!
Brilliant to watch as 'pile of bits' end up making a very useful tool.
Thank you I'm glad you enjoyed it.
Brilliant. New subscriber since yesterday, i watched your video on the valve modifications. You mentioned the rotary station and i was hoping to see it soon. I am delighted this morning. Very interesting the ingenious way you made the sprocket. Love the you're recycling old tanks, but also the simplicity of your methods. If i had to do such a project, and i might will in a near future, i would have calculated everything, taken a lot more time than you did. I am more in the realm of electrical and computer engineering, more of what i learned in other realms are from This Old Tony and other awesome CZcamsrs. I am surprised you don't even have 20k subscribers, the production quality is really top notch. Lovely British accent too. Looking for to see more content from you. Cheers from Canada.
Thank you so much for your kind words. I did a couple of calcs for this but nothing major. Just basic gear ratios to work out how fast it would spin and the PCD for doing the little sprocket. Nice to see that we have another This Old Tony fan in the comments. I think his channel is one of the benchmarks within the niche.
I set myself a goal of 20K by xmass. Had some really good growth in the last month so i'm optimistic that the channel will get there.
Thank you so much for the support and I'm glad you are enjoying the channel.
@@Handmadeextreme TOT is very well known in the CZcams machinist community.
Very cool! Just subscribed. Well done sir.
I could so do with one of these. great build.
Thanks. glad you enjoyed it.
Very nice, and very universal well done and thought out
Thank you, glad you enjoyed it.
I like how you think about future uses while doing the initial build. Hopefully 2 years later she’s performing how you intended.
Proper job! Looks very professional.
Bloody hell, you just made a sprocket like it was nothing...
Thanks very much. Glad you enjoyed it.
It's the flathead screws that just drive me nuts. Still gonna yoink all of this.
So so happy seeing this video ...clean work nice explanation . Good man really 👍🏻it’s wonderful idea you’ve got there 💚cheers
Glad you liked it!
I think Tony has influence on people all over the world . lol Nice positioner . And very unique too . :)
Nice job!!
Thanks!
Mate, using the swivel platform as an immovable jaw for the low profile is bloody genius! 👍
Thanks. I saves having to remove it and re tram it.
Random find. But you know what? Fair play sir. That's the most spot on DIY project I've seen in a long time. I completely understand the purpose of the build. Even it's application profiling. Very impressed 👊
Need/want a tool; make a tool. Excellent work. I enjoy listening to your process thoughts. Thanks for sharing. That cake looked good too.
Hi Andy, great to hear from you. Glad you enjoyed the video. The cake is delicious.. 😀
Nice job
Thank you.
This video was spellbinding to me. I loved every minute of it. I'm so impressed with your craftsmanship and ingenuity. You are a master at you're trade... trades? Thanks for sharing this
Thank you. Glad you enjoyed it.
Very nice.
That was brilliant and awesome 👍
Great job 👍👍
That has given me inspiration to build something like that.
Thank you. Glad you enjoyed it. Good luck with your own project.
Excellent work 👍
Thank you! Cheers!
Great video! Never leaving you unattended around my LPG tanks though! Never know what you will turn them into! 😃
Haha, hiya Josh. Glad you liked it.
An excellent build.
Your idea for the grounding strap is brilliant. I was going to use Tony's method using the clamp on the shaft until I saw that.
Cheers from your most recent subscriber 😁👍
Well played.
Thank you.
very professional look to it! i'm sure you could whip up something much simpler to do the job, but all the extra details sure make it nice to look at and use. well done
Thank you. Absolutely right, I like to have nice tools, it makes doing the job more enjoyable. It's like having a tidy workshop. Just makes it more enjoyable. Thanks for the support.
Good job!!
Thanks!
Incredible
Thanks.
your job is very gooooooooooooood
Great video. Specially the cake ending.
Outstanding
Thanks
Very nice bit of engineering!
Thank you. Glad you liked it.
Yeah nice build mate.....
Thanks, glad you liked it.
Хороший поворотный стол !
Лайк однозначно !
Good job with the ground strip. Sping loading is essential as copper itself is not springy. Also, Your design makes the contact directly to the cast iron plate instead of the shaft which is somewhat isolated by the glue.
Thanks. Glad you enjoyed it.
Beautiful!!
Thank you! 😊
@@Handmadeextreme your welcome. The after picture look nothing like that materials used. Looks like I could order one online👌
The sprocket, wow! Thats DIY
Thanks, glad you enjoyed it.
Amazing job! subscribed.
Thanks and welcome to the channel.
@@Handmadeextreme ;)
Absolutely beautiful work, I would buy this in a heart beat, if it was sold in stores........
⭐️⭐️⭐️⭐️⭐️