The construction method was similar to Kumkang Kind which i work for nearly 10 years. Compare to conventional method which are using plywood, wood and nails, this method was really fast which is 3 to 4 times faster. As my experience, normally we manage to raise 4 level per month easily. And for an Apartment that have 10 level, it just take 1 year to complete it all from concrete to finishing (painting, installing windows, doors and tiles).
It is only for a few floors, residential though the aluminium otherwise zouldn't hold the load of all the floors while the concrete sets. Otherwise your building takes too long to comlplete. At least that's what I think. Very interesting, cool concept. Full concrete construction is great for soundproofing, fireproofing, durability etc. To optimise it just needs a good thermal insulation system that at the same time reuces the amount of concrete needed. You can of course just insulate the outside against the concrete but it would be nice. Maybe this is more cost and few advantages over foam polystyrene block concrete builds or is it? Maybr doorways and stairs are better and easier with aluminium concrete formwork? I would ike to see them compared.
The actual problem is the electrical conduit for outlets, lights, switches not to mention the pipes for fresh, gray and black water that should be very very carefully planned and have several extra just in case because once the concrete is poured there is no way back and to run a cable or a pipe on the face of the wall just doesn't look good. I can see the cost savings. I have seen first hand a building being built with a very similar system and I use to work in the building after it was finished. It was a 3 story restaurant and they did it very fast when started. I have no idea how long the planning took.
In the Netherlands there is a old lighthouse which was built this way. They had a small mould which they moved upwards after each pouring of a bit of concrete.
Very great, quick , precision, and strength..very expensive cost..but labor wage in there very expensive, time is money..i think the end of calculation more efisien this method..
Saw the power boxes, but where do the wires run? Plumbing? Put together, take apart, it most add to the overall bill. I think the foam block system would be better.
The advantage with this over polystyrene block concrete builds is that this can do the floor and underlying walls at the same time. Possibly also the door and window openings are way easier and better with this sort of Alulinium system compared to foam blocks. Maybe the extra cost doesn't isn't justified by the few days of time you may win with that as it only workds for few story residential buildings anyways. You can of course just run the pipes and pour the concrete over or grind the wiring in later but this is a thing with almost all kinds of construction isn't it?
Дороговато выйдет такая алюминиевая опалубка. Это подойдёт для типового проекта массового строительства. У нас в России такие технологии не нужны, воровать на строительстве станет тяжело прорабам и всей начести, что кормяться этим. Только индивидуальный проект для честных застройщиков. Но тут круг замыкается )))
Where are the insulation, plumbing, electric conduit, Airconditions, etc..? The external vibrator will not reach down the bottom of these tall walls!. Pouring concrete should be done on stages ( at least 2 ) . But the idea can be modified/ improved.
I think such a ("template house base") is not a bad idea! One year, the builder can make more houses with a template. Costs are thus optimal. I would like to order a template based on a finished concept! Single-storey, 3-room house 100 sqm, SABLON house! Could this be? EU-Hungary-Budapest.
It looks pretty easy, but i would have liked to see a real world example, where construction elements have difficult configuration tuat does not match with you standard formwork element dimensions, this building looks like it has heen made with the exact dimensions to match formwork dimensions, which we all know that it hardly ever found on sites
It's all nice and clean at the start. Wait tell you get dried concrete on them. But I like it alot. Save on your body. 1 out of 10 10 being the best it gets a 10.
And after 10 million working hours the house is ready. (huge cost). Oups i need to change (add /remove) a wall socket. Eh sorry it is veeery hard what you ask (more cost). Would it be better to use pre fabicated panels?
and why we need so heavy duty walls ? Is any tank going to rush to my house ? And is it good to have so big load for the concrete slub ? And what about thermal insulation / moisture absorption etc ? Just take a look at SIP houses (speed / insulation / etc etc)
TheSaeed111111, чтобы “коммуникации” совместно с закладными “трубные каналы” благополучно перемололо щебнем, валящимся с трёхметровой высоты при отливке этажа целиком. Чтож, «рацуха» зачётная! Гениальность прям сквозит. Воистину оптимизаторский подход.
I can see there did you ancer this plates bzc you fil it whole with concerete and use vibro machine. How much this plates diverge. Bcz they are from metal and we know on sun metal are working there for it cant be precise. And what if i need to use it with wall 50cm thiknes? Im worked and we fill in sequence those type of wals but we make it more stabile by all profiles longitudinal, horizontal wertical. Even we put ancers in flor that concrete and vibrator dont slide sheets that are made framed from aluminium and playwood.. here i just se wall with no secure that he cant become fat on 1 place... nice but its paper strong for me...
The forms are genius, but that "BREAKING NEWS!" music from the 1980's is driving me up the wall.
I love this kind of product. I wish I had the money to invest in a full set of forms & build in hurricane prone areas.
молодцы , нечего добавить!
all my question has been answered in a video. nice one
wow!!!! just 12mins to finish a house.. amazing
excellent job and team work.
just awesome. solid concrete
This is very interesting sir now i am learn it sir
это не опалубка, это МЕЧТА любого застройщика ))))
Однотипных домов можно штамповать!
После 3-х заливок это будет мусор, хлипкий конструктор.
Вау! Супер просто супер конструкция!
เจ๋งจริงๆอยากมีบ้านแบบนี้จังเลย
This is the very best formwork video I have ever seen
no columns and beams all walls and yet its the best ever? way tooo expensive for forming too
If you need any aluminium formwork and scaffolding, pls contact me. jack@geto.com.cn
Hi, when do you attach the hose for copper lines? Also I didn't see the sewer system. Or this was only a demo?
What computers are running their CAD programs? Something from 2005? It looks like it's running at 5 fps....
The construction method was similar to Kumkang Kind which i work for nearly 10 years. Compare to conventional method which are using plywood, wood and nails, this method was really fast which is 3 to 4 times faster. As my experience, normally we manage to raise 4 level per month easily. And for an Apartment that have 10 level, it just take 1 year to complete it all from concrete to finishing (painting, installing windows, doors and tiles).
I'm confused since you have experience with this I'll ask you , these molds do they get removed after the cement drys ?
@@recklesslove2880 of course they remove it once the cement dry.
@@shinobi1804 thanks .
the music is kinda legend of Zelda, btw good video
Excelente video buen trabajo 🍺🍻🍺🍹🌮🌭🍕🍟🍔🍗🍖🍻🍺🍹🍺🍻🍻🍺🍹🍹🍺🍺🍻🍺🍺🍹🍺🍻🍺🍹🍹🍺🍻🍹🍹🍺🍻🍻🍹🍹🍺🍻🍻🍻🍻🍺🍺🍹🍹
It is only for a few floors, residential though the aluminium otherwise zouldn't hold the load of all the floors while the concrete sets. Otherwise your building takes too long to comlplete. At least that's what I think. Very interesting, cool concept. Full concrete construction is great for soundproofing, fireproofing, durability etc. To optimise it just needs a good thermal insulation system that at the same time reuces the amount of concrete needed. You can of course just insulate the outside against the concrete but it would be nice. Maybe this is more cost and few advantages over foam polystyrene block concrete builds or is it?
Maybr doorways and stairs are better and easier with aluminium concrete formwork? I would ike to see them compared.
Nice invention. Prefab-home on the same location as the building itself :-)
Comes from a US company wall tie.
Super, if compared with brick or hollow block is this method cost effective?
How many floors can be built?
I think it will be hard to be adjusted after the concrete dry out. For example, remove a specific wall between two rooms.
Circular saw can do it.
The actual problem is the electrical conduit for outlets, lights, switches not to mention the pipes for fresh, gray and black water that should be very very carefully planned and have several extra just in case because once the concrete is poured there is no way back and to run a cable or a pipe on the face of the wall just doesn't look good.
I can see the cost savings. I have seen first hand a building being built with a very similar system and I use to work in the building after it was finished. It was a 3 story restaurant and they did it very fast when started. I have no idea how long the planning took.
In the Netherlands there is a old lighthouse which was built this way. They had a small mould which they moved upwards after each pouring of a bit of concrete.
czcams.com/video/K67j5juf-V4/video.html
That is known as slipform technique or climbing formwork
Supply is there in Alibaba ... For India.
Will be cost effective & save time.
地盤用緊 一搬用三十層塊鋁板就甘不多玩完,同埋要吋常剷模,唔剷就算落左板模油都會出現大量沙眼。
уже и с подрозетниками ,молодцы !
Very great, quick , precision, and strength..very expensive cost..but labor wage in there very expensive, time is money..i think the end of calculation more efisien this method..
Nice job super engineering
Thickness of walls is 5 mm with copper 0.2 mm wire inside?
These are good, I'm fed up of steel and wood frames. Rusty and filthy, easy to break. And they are heavy!
Heavy is more like it. The key to success for future technology is less weight, which means less energy used in moving the required equipment.
ICF ("insulated concrete forms") uses foam. Even lighter.
this kind of forming is neat but way tooooooooo expensive
Saw the power boxes, but where do the wires run? Plumbing? Put together, take apart, it most add to the overall bill. I think the foam block system would be better.
The advantage with this over polystyrene block concrete builds is that this can do the floor and underlying walls at the same time. Possibly also the door and window openings are way easier and better with this sort of Alulinium system compared to foam blocks. Maybe the extra cost doesn't isn't justified by the few days of time you may win with that as it only workds for few story residential buildings anyways. You can of course just run the pipes and pour the concrete over or grind the wiring in later but this is a thing with almost all kinds of construction isn't it?
这样出来效果很好👍
very nice job.......
Hi
*Now I feel like going for a run or something.*
pump some concrete weights
It's going to be a great day tomorrow! Things are looking up!
Могли бы сразу и провода тогда заложить...и на опалубке сразу обои растянуть, чтоб потом не клеить...
Электрика по идее уже проведена, а обои это конечно может стать хитом!
What a mazing brains they have...fantastic
hello
whether kicker are casted for internal walls of next floor
模块化打印生产之前没出来国人有这么先进的模板技术!我顶
再看一次影片工地好乾淨沒有雜物真的是化繁為簡以後想要的房子就是這種型式,請問一下,一坪建造費用,要多少錢?
you can make any molding on the walls.
Thank you for the useful information.
Interesting concept and very versatile product, I wouldn't want to live in one though. Whoever thought this music was a good idea needs replacing.
work of art
This was pretty great
Отличная технология.
Wow, perfect job
How long did this floor take?
How many days floor cycle?
If you need any aluminium formwork and scaffolding, pls contact me. jack@geto.com.cn
Electrical boxes are installed, but where is the conduit for the wiring?
shh... don't worry about it.
They already had piping for wires which was concealed along the reinforcement bars....
Was wondering the same thing. Probably transmitting electricity through the air, Tesla style.
Musch halt durchn Beton Schlitzen
You just stick the cable in-between the bars and into the box
How much for that complete set USA Ohio delivered?
I love the video just had to MUTE it to enjoy it.
Дороговато выйдет такая алюминиевая опалубка. Это подойдёт для типового проекта массового строительства. У нас в России такие технологии не нужны, воровать на строительстве станет тяжело прорабам и всей начести, что кормяться этим. Только индивидуальный проект для честных застройщиков. Но тут круг замыкается )))
That music is from a 70s day time tv I’m sure of it 😂😂😂
Very impressive 👍👍👍
Strong but free from labour,wastage,bricks,plastering etc. V good innovation
Nice aluminium mold :)
Superman music. Heroes in action.
I m doing it with plywood. This is bomb proof structure.
no its the same its just neat and way too expensive. why make it perfect in one go? for sure they will plaster it after
تحياتي للشغل الذكي
تعالوا عندنا في المملكة العربية السعودية
في شغل كثير ياصديق
THANKS VERY MUCH GOD BLESS YOU
most Chinese don't believe in "Bless you"
Where are the insulation, plumbing, electric conduit, Airconditions, etc..?
The external vibrator will not reach down the bottom of these tall walls!.
Pouring concrete should be done on stages ( at least 2 ) .
But the idea can be modified/ improved.
这个感觉可以,整好后,就能慢慢灌浆了
very smart work and very clean
Gracias por compartirlo un saludo 👍
Hi, how long does it take to finish formwork, all this process?
I think such a ("template house base") is not a bad idea! One year, the builder can make more houses with a template. Costs are thus optimal.
I would like to order a template based on a finished concept! Single-storey, 3-room house 100 sqm, SABLON house! Could this be?
EU-Hungary-Budapest.
Excellent!!!
Welcome to LEGO AGE...🏗
Good one
I was thinking wtf until the concrete went in :D
The rebar was an early tip off.
How do you install plumbing and electrical inside the walls?
Before pouring concrete
Excellent musical decision
how long does it take to build
Wow.. electric friendly
see full video before commenting. It makes you see less stupid.
Where does the concrete go?
Deshuttering time for wall pannels?
It looks pretty easy, but i would have liked to see a real world example, where construction elements have difficult configuration tuat does not match with you standard formwork element dimensions, this building looks like it has heen made with the exact dimensions to match formwork dimensions, which we all know that it hardly ever found on sites
Where can I get this aluminium formwork?
I need the whole set..
It's good innovation
nice video good lesson
good ol house of rock amirite?
It's all nice and clean at the start. Wait tell you get dried concrete on them. But I like it alot. Save on your body. 1 out of 10 10 being the best it gets a 10.
And after 10 million working hours the house is ready. (huge cost).
Oups i need to change (add /remove) a wall socket. Eh sorry it is veeery hard what you ask (more cost).
Would it be better to use pre fabicated panels?
and why we need so heavy duty walls ? Is any tank going to rush to my house ?
And is it good to have so big load for the concrete slub ?
And what about thermal insulation / moisture absorption etc ?
Just take a look at SIP houses (speed / insulation / etc etc)
How many floors can be built like this
Any cost advantage compare with traditional construction
What is the life of this constructions
Currently our government (tdp) has started this project for ...cost will decrease but time will save
how many days work with building
I love the music!
How much it will cost for double bed room home
how do you run water lines and electrical through solid concrete wall?
With BA13.
Music was so noice...
Hmm didnt se any tubes for the electronic boxes connected.
Fantástico!
За то время пока они собирали эту алюминиевую опалубку, можно было из обычного кирпича сложить две коробки для такого дома.
Интересно а за сколько по времени из кирпича собрать такую коробку пятерым мастерам?
Можно было сразу коммуникации проложить, или хотя бы трубные каналы, а не только подрозетники
TheSaeed111111, чтобы “коммуникации” совместно с закладными “трубные каналы” благополучно перемололо щебнем, валящимся с трёхметровой высоты при отливке этажа целиком. Чтож, «рацуха» зачётная! Гениальность прям сквозит. Воистину оптимизаторский подход.
sweet concept
how long is take for bulled this building ?
full concrete house...... cost reduction only on how much worker when build
its also solid. and would last even if you die 4x
Why drive out the steel ties? What's the point?
Nice, but looks expensive
The aluminum is only for forming the concrete ... Did u watch the whole video ?
@@TheDukanu Can you suggest more videoes.
If work like this.. my project will be done in 4 years
oh look. another hacky "pro"
did your infrastructure any branches in india..
super demonstration
I can see there did you ancer this plates bzc you fil it whole with concerete and use vibro machine. How much this plates diverge. Bcz they are from metal and we know on sun metal are working there for it cant be precise. And what if i need to use it with wall 50cm thiknes? Im worked and we fill in sequence those type of wals but we make it more stabile by all profiles longitudinal, horizontal wertical. Even we put ancers in flor that concrete and vibrator dont slide sheets that are made framed from aluminium and playwood.. here i just se wall with no secure that he cant become fat on 1 place... nice but its paper strong for me...
Do you train how to use these forms ?