Toyota Pre-Collision System/Radar Cruise Control Unavailable-Clean Sensor. What you need to check.
Vložit
- čas přidán 27. 07. 2024
- Toyota Prado, Hilux, Fortuner, LC200, LC300 and other models, Radar Sensor requires cleaning. This is what you need to inspect.
- Auta a dopravní prostředky
That spider was well burrowed into the grill and sensor of that Prado, he got free holidays / roadtrips and a steady stream of bugs for food. He was living in luxury as a squater until you ruined it for him . 😂
Amazing info. Keep it coming! (No spider was harmed during the making of this video...😅)
Thank you kindly
Funniest video I've seen for a while!!! Nice work, keep them coming
Awesome, thanks.
Thank you SO much - I followed each instruction and it totally fixed the problem - I’m so thrilled!!!
Great to hear. Thank you 🙂
Just fixed my 2020 Camry. Thank you for the info, you saved me some money.
Great to hear. Thanks 😃😃
Wow, I thought the sensor would have been moulded inside the badge to stop this sort of thing happening.
What a great video, well done
Awesome, thanks😀
Thank for good information and pls make sir how read freeze fame data
Interesting, Ferntree gully Toyota wanted me to rebook in 2 weeks for them to have a look, Ute is only 3 months old!
Always welcome to come to Nunawading
Another informative video and timly as I have cob webs galore around our Prado grill. Now I know how access the area to sort out said spiders. I too will attemp relocation of the little varmints, cheers 🍻
Thank you
Park your car inside the garage so you don't let insects and spiders into it.
Do you know which sensor for this system is located. I have front camera unavailable , pre- collision system malfunction, antilock brake system malfunction 😢
G'day Darek I got the same problem with my 2018 Prado Kakadu " Pre-Crach Safety Malfunction" and " Check Engine" lights come on while we were on holidays towing a caravan I took it to to closest Toyota dealership that was Taylor Toyota in Hamilton they were very helpful and connect their diagnostic machine on the car and there were a few codes coming up(I got a printout of the codes) they reset the codes and it was fine for a day and the codes come back again, I cleaned the radar and all other sensors even disconnect the battery codes was off but come back on the next day, any advice?
Pre crash safety malfunction will come on when there is an engine malfunction code. You need to fix the engine code. What was the engine code on the printout?
Thanks tor coming
back to me. I hope I
read the report
correctly, codes are:
P066F, P1609
C1201,U0126,U0129,U0
142,00132,U1110,U014
O,UC1A50 one that
Taylor looked at was the glow
plug no3 wiring but nothing was
damaged.We just
come back from
holidays I still didn't
talk to my local dealer about the codes. I checked my air filter and saw that the back two clips were loose and there was some dust on the inside of the filter cover. Thanks
Thanks for the feedback. P066F refers to a short circuit in the No3 glow plug circuit. Trouble area could be Glow plug controller, No3 Glow plug assembly or short in No3 Glow plug circuit. P1609 refers to Air Fuel ratio too lean.
If P066F keeps reoccurring, you need to fix that and retest
When the grill or radar is removed and installed calibration of radar sensor is required! But how?
How do you calibrate it?
You need a diagnostic tool and special service tool. The special service tool is placed at a distance from the radar sensor and calibration is performed using a diagnostic tool
@@nunawadingtoyota8134 thank you champ. Dam i thought i would get it fixed myself. Owell. Appreciate it
Looks like deadly funnelweb spider 😮. Should have harmed that spider making this video.
He is in Melbourne, no funnel Web there...
Let the spider live I say😃
Yeah that's why we don't live in Australia lol
How can people just let spiders and other shit live in their cars? for god sake park your car inside a garage and look after it.