Jumper T-Pro Radio Controller set-up Review

Support DATfpv for all his hard work:
www.buymeacoffee.com/datfpv
www.paypal.com/donate?hosted_...
paypal.me/datfpv
instagram: / datfpv
tiktok: / datfpv
facebook: / datfpv
twitter: / datfpv
Join my Channel: / @datfpv
BUY Jumper T-Pro:
www.banggood.com/JumperRC-T-P...
#fpv #fpvfreestyle #fpvlife #fpvdrone #fpvaddiction #fpvracing #fpvpilot #quadcopter #fpvmagazine #TBStango2 #ipswichfpv #impulseRC #drone #dronevideo #drones
In this video I will go over the jumper t-pro radio controller from jumper. The Jumper T-Pro is a multi-function controller eg frsky, futaba, spectrum etc I cover binding flight test and final thoughts.
The Jumper T Pro is a game console style controller for RC Models. The radio features adjustable hall sensor gimbals and has a compact 1.3" LCD screen. The T Pro runs on OpenTX and supports features such as voice and vibration as well as connection to a PC for use as a simulator controller. Power is provided by two 18650 cells and charging can be done over a USB-C cable. The rear module bay supports expansion via the "Lite" socket - supports ELRS Nano / TBS crossfire or Tracer Nano modules etc.
This model features a 4in1 multiprotocol module with compatability with ~50 different radio protocols.
Features:
- JP4-in-1 Multi-protocol module included. DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan etc.
- OpenTX firmware
- Hall sensor gimbals
- ELRS Nano / TBS CRSF Nano compatible module bay on rear side.
- USB-C internal charging
- Up to 16 channels of output (depending on the receiver)
- Wide voltage input (2pcs 18650 recommended)
- Vibration reminder function
- Support telemetry (depending on the receiver)
- LUA Script support: Yes
Specification:
- Size: 160x128x68
- Weight: 488g (without battery)
- Working voltage: DC6V-DC8.4V
- Firmware: OpenTX
- Display: 1.3 inch LCD display, 128* 64 resolution
- Gimbal Type: HALL Sensor
- Upgrade method: USB online upgrade
- Simulator mode: 3.5mm standard ppm output or USB
- Battery: 2x18650 (Battery not included)
- External Micro SD Card: reserved SD card slot
Included:
- 1x Jumper T-Pro Remote Controller (4in1)
- 1x Zipper Case
Jumper T Pro ELRS Internal 2.4G 1000mW ELRS module Radio Controller Hall Sensor Gimbals EdgeTX/OpenTX
Jumper T-Pro Multi-Protocol RF Module OpenTX RC Transmitter
The Jumper T Pro is the gamepad style radio of your dreams. With OpenTX, hall sensor gimbals and an internal JP4-In-1 multi-protocol module pre-installed, this radio is ready to become your new daily driver transmitter!

[@richard098]

Your reviews help me alot, especially when you dived to mambo and tracer, great quality and clarity, well deserved subscribe from me, keep it up.

[@Crochetfpv]

Joshua Bardwell has a video showing how to use the momentary switch as an arming switch. It works great and it's really easy to do!

[@Arek_R.]

Once you enabled the internat tx you can hear noise picked up by the camera microphone and when you go change modes the noise modulates lol

[@RhinoNigel]

Glad I’m not the only person who sniffs new stuff lol

[@cold-frontin_penguin7902]

How do I know if I bricked or ruined controller? I flashed it with a firmware, It boots up but I heard that there's any interruption during farmware update It will ruin it. My USB cable came out while updating How would I know if I ruined it or not

[@aebrawlstars6459]

is the controller compatible with the dji o3?

[@SzymonSays1]

He's back! been a while!

[@Datfpv]

hey mate.. has been a while, trying to get back into it all at the moment.. lost my mojo a little with it all lol. !

[@dustincopeland921]

Probably a dumb question. But I’m just getting into drones and I noticed that jumper t-pro outputs 2.4ghz and I can only find receivers(VTX) that use 5.8ghz does it matter or can you change the 2.4ghz to 5.8ghz? Please and thank you

[@ammar6937]

I think you've got things confused.. The vtx signal from the vtx is for the image through your Googles which run on 5.8.... The 2.4 elrs is for the link of the drone to your controller... So there's two links on a drone .. The small receivers which connect to right controller is to link drone to controller which will be 2.4 if using elrs so you can fly the drone. And the 5.8 is for image from drone to Google's....I hope that makes sense

[@axlfn8031]

I don’t know if I should buy this I bought a tbs tango 2 pro though for my iflight evoque f5

[@Datfpv]

if you have the tango 2 I'd stick with that!

[@asilaknn]

Hi Dat
I have a question for u
I want to start fpv first of all i need a controller , so which controller i need to begginning?
thanks

[@danteanderson9052]

Jumper t12 pro

[@woodstock69girl55]

Can it be used for gliders.

[@Datfpv]

not sure to be honest 🤷‍♂️