Installing OLD-STF Shovelhead Rocker Box Oil Lines | Lnsptblvd
Vložit
- čas přidán 17. 02. 2019
- This kit has been on my wishlist forever. Thank you Keith and Mike!! you guys are awesome!!
Check out their online store and support quality American made products. Tell 'em Lnspltblvd sent ya!
old-stf.com/
Here is the link for the oil lines:
old-stf.com/products/harley-s...
The Bee Blocker:
old-stf.com/products/old-stf-...
Follow us on:
Facebook: / lnspltblvd
Instagram: / lnspltblvd
Check out our online store!
www.lnspltblvd.store/
Thank you for watching!
Song: LAKEY INSPIRED - Blue Boi - Auta a dopravní prostředky
soo dah niiice doooo!!!
not gonna lie yall are one of the reasons i just did my drivings test. ive never felt the amount of freedom before as i have on a bike. thank you
I have these lines on my shovel, they have given me NO grief, a simple quality Upgrade. I live in Virginia almost to Tennessee. I am fast becoming a big supporter of Lnsptblvd.
Been wanting to do that on my 74 shovel and my 75 sportster. Looks awesome 👍
That really looks nice. I really dig your attention to detail. The nice part about the kit is that those brass fittings are standard plumbing pieces that can be found in any hardware store. Same with the copper tubing. If you ever strip one out just take it to the store and match it up! That line design resembles the ‘60’s panhead upper oiling system! Good job it’s really great to see young guys into old Harley, especially choppers!!!!!! CFL!!!!!!!!!!!!!
Good job
Love the Bee blocker! nice shovel!
I have the same lines but never installed them. Now I know it's easy. Thanks man.
Another nice trick piece. It adds up to one sweet ride!
Good informative video, please put out more content like this parts installation, and maybe some troubleshooting. 🤙🏽
will do! stay tuned
Thanks for showing some love to the Shovels.
Looks sweet man , and I like how it distributes the oil evenly now too
nice kit going to do exactly the same to my 1975 FLH as I intend to keep her. Cheers.
Like the bee blocker thanks for the hook up !
no problem! Support small business
Now that is one beautiful shovelhead!
I like these install videos! Keep them coming!
Bike and new oil lines look kick ass!
Looks sweet! Thanks for the info on the aircleaner.
That's one hell of a nice Shovel, excellent work!
That's a clean Shovel...
Great improvements. Good job !
I've always loved your videos. Nice work. 🙌
Lindsey & Dick thank you!
Clean little bling!
Those bee blockers look great, that shovel sounds great as well. 😎
Awesome kit, awesome look. Sweet bike.
Love the vids...always educational or entertaining!
Very cool and a very, very nice Bike... Have fun and always and fine ride... Greetings from Hamburg, Germany
Sweet lookin set up. Hope ole Stuff still making them.
New lines look good!
That is a mighty clean engine for a shovel.
Thank you!
Looks awesome... Now I just need to find a shovelhead. Your bike is sick!
super nice, looking good, cheers!!
Looks fantastic
Looks great too👍
Looks great!
I really like the brass oil lines, I have a tremendous amount of brass trinkets on my 2009 HD FXSTB.
I love this kind of videos.. Very informative.. salute.. 🤙🏼
Thank you!
Looks good!
Awesome, love it.
Gotdayummmm that looks so much better!
Looks good 👍🏽👊🏽
Looks really good
Is that a PRE- Bent finger too? 1:18 lol. It's perfect for showing stuff in tight places!! You Guys rock
Loved this, shovelheads, forever!!!! Now since i just picked up a 1970 flh about a month ago, be interested in how you got the oil tank fabbed in, and maybe some ideas about the sweet,mid ride set up. Ride safe, G. Speight.
Looks very cool compared to old lines and thanks for the vid,
Thanks Scott!
Very cool! Bike is a true work of art. Its gotta more fun tinkering around with that thing than working on newer bikes.
Yes! old bikes are super rewarding to wrench on
looks dope!
thanks dawk
Looks good bro. Awesome bike 🤙
Thank you!
Lookin' good!
perfection now if you don't have it already, get some never dull to keep them clean.
This is still my favorite bike on CZcams.
Beautiful!
Looks sweet man.
Hella tight!!! Luv ur bike bro
Thanks Matt!
Fire bro!!!!
Nice bike looks great
U got skulls ! Awesome
looks good.
That is beautiful.
Looks good my dude
Thank you!
Super cool 😎
Love that bike.
I do like the way they look and I do appreciate the even displacement of the oil, does it make adjusting the pushrods a pain in the ass?
Curious thinking about putting a similar kit on my Shovelhead
Love the lines, purchased after seeing on your vid...big Thanks!!! Also, where did you get the mid controls? Been looking for something like the ones you have as my 78's originals did not survive.
Really improved the looks of the engine! Good video!
Damn that bike is so badass
Beautiful bike
Too much cool in your bike sir 😍
Thank you!
Beautiful 👍
Dope!
Came out clean ☝️👊
I tried the split line system on 88ci with solid lifters, seemed to make the front rocker more noisy like it was over oiling and having a hydraulic hammer effect on the pushrods, tappets, etc. the normal ticky ticky sounded sharper and more metallic. I changed it back to the standard system, sounds normal again.
Gonna get a set for my '77. Looks awesome, do you still have it and if so how well have they aged?
🔥🔥🔥🔥
Very nice.
So da nice!
Dig it!
Awesome lines👌 What type of throttle is that again?
Le kick et l'échappement bof bof...le reste 💖
I run them and love them.
I have a 71 FLH with a oil pressure gauge on the rear rocker arm bolt on the rear rocker box. Will the gauge still operate with this kit?
where’d you get those foot controls? i have an open belt and i like the idea of mid controls more and more every day lol.
nice looking sled! What are the grips you're using? I couldn't catch the name...I like them should look good on my 81 FXWG. Thanks!
Hey man, do you remember what lenght your springer front end was ? Was it stock lenght, -2",-4" ?
Soda nice dude!
looks like adjusting the pushrods will not be easy with the new lines? Looks goods though!
awesome!!,What oil tank you running?
Chega dar uma tristeza de ver como é fácil ter acesso as peças ... Ficou linda! parabéns!!!
Achei voce tambem , tmj abraço
I'm in love with this build. I've been looking for it in your other videos but I can't seem to find it. What is the model and year of the bike also the motor and trans combo?
Aaron, 1970 FLH came with a cone shovel motor. In this video he has a generator shovel which were only prior to 68 and mid 69 and before. He has most likely a S&S generator shovel. A beautiful motor. They look much better than cone shovel. It is a beautiful bike he has but if you want the same setup make sure you get a 1968 shovel or before. The problem is generator shovel harleys are doubled the price of cone shovelhead. Good luck. And sure this is a nice setup he has especially the Bee blocker
Have you had any problems with the lines because of the hard compression connections?
From England !!! Really enjoying your stuff !!! Any news on the BMW k ?
Thank you! No update on the BMW yet. Andrew is waiting to get his Motorcycle license first
So cool man, what bike and motor is that? Loving the garage builds, keep it up!
Its a 1970 Harley Davidson FLH
where are your mid controls from? I like that setup...
Very nice, gotta do that to my shovel. PEACE
yes!!
Some thing about brass and Harleys, they just go together.
How do I install the B Blocker air cleaner n take off my S&S tear drop housing
Parabéns...perfeito, muito bom comprar pela internet e receber o produto pelos Correios em casa, país de primeiro mundo é outra história, espero que o Brasil em algum tempo da história chegue nesse nível.
Se vc nao compra pela internet esta perdendo tempo. Os correios sempre funcionaram muito bem assim como as transportadoras. Para de ser vira latas.
@@andrebpt Bem que eu queria que fosse assim, o município que moro é considerado área de risco, encomendas não chegam, Uber cancela viagem, agora o IPTU vem, e na hora de fazer a escritura o ITBI é caro, igual Morumbi, mas...vida que segue.
That looks sick. Quality fit. On a side note, WTF did you do to your index finger on the right?😳. My knuckles are hurting just looking at all those bends !😊
lol i dont even remember to be honest.
How dies the oil move? Vacuum from the head or pressure from the case? I don't know much about these engines
EAEM there’s a pump at the case.
What tires are you running?
ESPETACULAR GOSTO MUITO DESSE CANAL É SHOW... RAPAZIADA AMEI VOCÊS ESTÃO DE PARABÉNS ...