Video není dostupné.
Omlouváme se.
HONEYWELL Home T3 | Program a HEAT & Cool SCHEDULE | Programmable Digital Thermostat
Vložit
- čas přidán 16. 07. 2023
- Model RTH6360D1002 - Part 2 of 2 - Discussing HOW to fully programming a T3 thermostat device
+Stay tuned for more videos every week!
+Further SUPPORT the channel by purchasing ANYTHING thru my Amazon Associate links below:
#CommissionsEarned
This thermostat: amzn.to/46SBg3i
Contact: JohnFrancoNH@gmail.com
Thank you to the following artist(s) - Music info/credits below:
CZcams Music Library
Omg! This is so complicated. I need a class
Thanks very much for uploading this video. I wouldn't have been able to program the thermostat today without your instructional video.
Thank you, John. So much more informative than the instructions provided by Honeywell. Greatly appreciated!
Your welcome!
What a pain!
This video is great. I have watched and programed my unit a few times now BUT when I finish Sadly the mode ONLY shows the option of "Permanent Hold" or just blank or off. What do I need to do to get to the Run Program mode?
Where is the link to the first part? Thanks
It is winter how do i programme it for heat schedule only. I guess since I have it on heat it will follow heat schedule only correct. If I switch it to cool then cool schedule kicks in.
after programming, mine doesn't show "following schedule" Have I missed something??? [PLEASE HELP]
Hi quick question, my old thermostat had a variance of 3 degrees between the temp of when the furnace starts and stops, it gave it longer to run but waited longer to restart, at the moment it starts and stops to frequently, there fore it runs more often but for a shorter period of time, hope this makes sense.
Does T3 not have any way to set up how sensitive it is before starting or stopping? Like 1 degree Celsius or 0.5 degrees Celsius? Thank you!
No
Got mine installed now I’m getting hot ac air. What could it be?
How easy are these to install? Any videos on installation? Thanks in advance
Hey John, i'm having an issue of the thermostat turning on right after it turns off after hitting the set temperature. For example, if the house was at 80 and i set it at 74, it would get to 74 and then turn off and then maybe 3-5 minutes later turn right back on. What is the solution for that? is there a way i can tell it to wait until it hits another temp and then turn on?
would appreciate the help!!
thank you
Idiot 😂🤣😭
Exactly. I’m having the same problem it used to say permanent hold. I somehow cannot get that to appear on the screen anymore. Any ideas
Can This Connect To The Honeywell App?
How can I skip cooling?
How to replace the battery sir
John, I just got one and can't figure out how to program only for cooling, it's summer in FL. Woke up to the heater running. Trying to find your other video
Set the mode to cool and it run ac only
@@jontaylove25 Ohhh, not auto?
When I wanted to up it from 71 to 75 it’s not on blue
Any tips on the mode where it switches between heating and cooling automatically?
you need a thermostat that has the AUTO changeover function
The program requires setting cooling settings. I do not have A/C, only heat. Is there a way to bypass all cooling settings?
OK, I just found there is a way bypass the cooling settings and just set heating cycles. It is not that obvious, but it is in in the instructions somewhere!
The back lit light is not on everything just blank
I just need the heat to stay on. Only cold air comes out.
I bought one and mine does not have a prog option. Only Time, Date, F/C.
Did they put the wrong one in the box?
I looked at the model number on the unit, it matches the model number on box.
Don't feel like taking it back to the store.
I have the same exact issue!! Did you find a solution??
@@naomivannes8980 I wish I could remember. I know I returned one because we were missing a wire in the wall for it to turn on. I'll have to look at it again. Did you get it figured out?