Now that you have a Mcgaughy's product you know what you have to do. BUY THE MCGAUGHY'S LIFT KIT AND LIFT THE TRAIL BOSS 6" or TALLER your fans wanna see it who's down 🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🔥🔥🔥🔥
With all the exhaust mods done, can this pass a smog test? I want to do my exhaust but I want to be able to pass smog test, California is so strict nice truck btw love the video keep it up
I liked the look of the mud flaps better, but I understand what you are saying. This looks kind of funny: but if you like it that's all that matters. Nice video.
I'm kinda sad for you seeing that on the front of the mud flap area these new pieces don't actually cover the screw hole thats higher up... actually leaving exposed threading to rust like that. If i we're you i'd fill those in with something either a clear film or a bit of hyperdip coating either clear or color matched and it should protect it. Anyways good video loving the look of the Trail Boss, oddly enough i own a 2021 GMC Sierra 5.3l all white but i love watching your videos haha
I like your videos I have been watching your older ones becauseI have a 2017 Chevy Silverado 1500. I have a question now on the new trail Boss that you have why are the mirrors below to where they used to install them like on the 2017 or most trucks just looks weird to me
Hello I have a brand new 2021 chevy silverado crew cab RST trim . It came with power adjust and heated I think rear view side mirrors. Do you know if there are replacement mirrors available that power adjust and power fold for my truck? And where to get them? Thanks Ray
The dealer didn’t bolt my front mud flaps to the frame on the lower tab of the mud flap I I was getting a vibration noise going over 50. It was driving me crazy. I did a search and found out about the mud flaps not being bolted.
It's hilarious the replacement caps cost more than a new oem mudflap. Literally priced them out and it was almost $100 more than new mudflaps from the dealer lol.
Is that $140 for one side? Is it 280 for both sides ? HA ! By the way I’m really enjoying your channel I think you do a good job. People have to understand keeping a factory OEM look is desirable sometimes.
$140 for all 4 pieces. Wish they would offer just the front two flaps for $70. I don't see the point of replacing the rear mud flaps as they don't cause any rubbing and serve a good purpose.
I have same truck but black , & hate when people remove mud flaps cause they are the ones that flick up Rocks N chit down the freeway. Wait till the guy in front of ya with no mud flaps chips the front of your Truck or windshield ! Does Look good though !
When you put the 3in spindle lift on Larry you said put 2 in wheel spacers in the rear to match, if I put 4in spindle lift would I need 3in or two and a half inch wheel spacers in the back
They are and are a must if you don't want chips. Most everyone on here does the same exact things to there vehicles, year after year. Idk how people still watch.
![TOP 5 Silverado MODs + 2 Bad Choices [2019-2024] Trail Boss Modifications](http://i.ytimg.com/vi/ZyVhp7ldrN4/mqdefault.jpg)
![TOP 5 Silverado MODs + 2 Bad Choices [2019-2024] Trail Boss Modifications](/img/tr.png)
Now that you have a Mcgaughy's product you know what you have to do. BUY THE MCGAUGHY'S LIFT KIT AND LIFT THE TRAIL BOSS 6" or TALLER your fans wanna see it who's down 🤟🏽🤟🏽🤟🏽🤟🏽🤟🏽🔥🔥🔥🔥
I really like how thorough you are. I appreciate how you’ll mention different options when modifying. Good stuff. Thank you.
Those corners are a nice touch. OEM looks exactly. Beats all the road debris hitting the fender lip. Great sound, truck looks sweet.
Loving the leveled look on the trail boss
I actually thought he was gonna fill it with bondo and match it up
The TrailBoss is coming along fast! 🔥🔥🔥
Nice! Just ordered some for my lifted 2020 Silverado. McGaughy's has you to thank for that sale.
Thanks for posting! I'll have to see if Mccaugheys offers them for mine. The Trail Boss is looking nice! 👍🏾
You know what they say about a fool and his money. You just proved it.
3D print a plug, and paint it with some touch up paint.
Sweet really liking this truck
What do you do you do for a living? That would be a cool video
@@chrismoney1468 don’t watch him then
It does make a difference the little things
Mmmmm I’ll just 3D print mine and save money lol
Send me a set. ;)
me too
The only person who’s going to know he did this is HIMSELF and US 🤣
Still SUBSCRIBED✌🏼
Haha it's the little things that matter
With all the exhaust mods done, can this pass a smog test? I want to do my exhaust but I want to be able to pass smog test, California is so strict nice truck btw love the video keep it up
GOOD CHOICE
I have them on my truck, what's $140 when you're putting them on your 55k truck
I liked the look of the mud flaps better, but I understand what you are saying. This looks kind of funny: but if you like it that's all that matters. Nice video.
I'm kinda sad for you seeing that on the front of the mud flap area these new pieces don't actually cover the screw hole thats higher up... actually leaving exposed threading to rust like that. If i we're you i'd fill those in with something either a clear film or a bit of hyperdip coating either clear or color matched and it should protect it. Anyways good video loving the look of the Trail Boss, oddly enough i own a 2021 GMC Sierra 5.3l all white but i love watching your videos haha
Someone could probably just 3d print a small plug to fill the hole and make it paintable so you just spray it body colored and it would look fine.
whats your exact exhaust setup in this video?? It sounds amazing man!
This proably sounds dumb but I would’ve painted the cap things white
Rock chip like hell
Wouldn’t last that long painted lmao
Rhino line white
Nice sounding truck 👍✌️🇨🇦 I do like the frogs ✌️
Good info bro! Nice truck, what set up are you running with wheels/tires/lift?
3:11 still got a hole showing
Yeah I think they look a lot better but the hole still shows and I would’ve paint matched em
Should of looked at the Sharp Truck paint matched plugs. Much cheaper and almost disappear.
Do you notice more rock chips at all? Just put -18 offset on my truck and debating on mudflap delete or buying kickbacks
Leave them on i have same truck holes look dumb...listen linda!!!
How do you remove it from the hole? I don't want to break it and can't tell how to squeeze it, from top and bottom or from the sides?
What’s all done to the exhaust ??
I like your videos I have been watching your older ones becauseI have a 2017 Chevy Silverado 1500. I have a question now on the new trail Boss that you have why are the mirrors below to where they used to install them like on the 2017 or most trucks just looks weird to me
Hello I have a brand new 2021 chevy silverado crew cab RST trim . It came with power adjust and heated I think rear view side mirrors. Do you know if there are replacement mirrors available that power adjust and power fold for my truck? And where to get them?
Thanks
Ray
Any issues on your paint whit the rock chips !! After removing the flaps
Up next I bitch about how easy gm's paint chips 😁
The dealer didn’t bolt my front mud flaps to the frame on the lower tab of the mud flap I I was getting a vibration noise going over 50. It was driving me crazy. I did a search and found out about the mud flaps not being bolted.
Any rubbing on your tires since removing the flaps ? what lift kit did you install ?
Havent disliked anything you have done to any of your trucks!
Where can you get a fuel tank skid plate? 2021 Silverado 1500 RST
It's hilarious the replacement caps cost more than a new oem mudflap. Literally priced them out and it was almost $100 more than new mudflaps from the dealer lol.
@lmfscrew ideas on this now? seems like the link is broken
I pulled the little rear ones off my 2021 F150 and found rubber grommets the same shape to plug the holes cost about $3.00
Gotta get that rig ceramic coated
How did you get the back mud flaps off. Thats all I have left
Red calipers would tie in the Z71 emblems and tow hooks
What size tires and wheels you have on your truck?
??
Does anyone know if these will work with the oem fender flares? They have a cutout for the stock mud flaps
Nice
Reminds me of the z71 trim on 00-06 suv z71's
Enjoy this channel
Where did you get those pieces to replace the flaps?
Leave them on
Is that $140 for one side? Is it 280 for both sides ? HA ! By the way I’m really enjoying your channel I think you do a good job. People have to understand keeping a factory OEM look is desirable sometimes.
$140 for all 4 pieces. Wish they would offer just the front two flaps for $70. I don't see the point of replacing the rear mud flaps as they don't cause any rubbing and serve a good purpose.
What size are your quad tips ? Looking to get them done on my 2020 trail boss
Have you noticed any bad vibrations since removing your rear blocks?
why not just do a white wrap or spray them white?
What was the other option that you spoke of that was $500?
What tools do I need to take the mud flaps off?
Curious have you changed out the fog lamps to LEDs? If so do you have a install video and brand to recommend? Or did you just change the bulbs
The new Silverado all have led fog lights came with truck 👍🏻
Those wheels for a Trailboss? Interesting choice.. I would have went with a more off road look for an off road truck.
you should have those caps smoothed and painted to match the white i bet you couldn’t even see them from 10’ away
Still have the one hole on the front fender sheet metal where the mud flaps were installed. I wish dealers would NOT install any accessories!!
What size wheels and tires did you go with
How’s the reception with the aftermarket antenna?
I hate the mirrors on the door panels.. the 2015 looks way better.. IMO..
Should really get rid of the side steps and it’ll be lookin just right👌
what running boards are those?
I have same truck but black , & hate when people remove mud flaps cause they are the ones that flick up Rocks N chit down the freeway. Wait till the guy in front of ya with no mud flaps chips the front of your Truck or windshield ! Does Look good though !
Love it!
Color match the black on the front of the truck I think it would look a lot better
Are those straight pipes or?
Why do the red tow hooks bug me?
What steps do you have?? Thanks
This guy's got way too much money to burn...lol.
What steps are those?
Is that a real trail boss
Looks ugly..just put the original parts back on bro..IMO
How much dou you pay for your rims
I wish I had round wheel wells! (2021 Sierra owner)
Are you getting a range for this truck?
someones gotta be able to 3D print those for cheaper
Is your rear well painted (liner)? Or plastic liner?
Felt liners like the front
Looks good man
Colour match the front grill and bumper next!
What exhaust is this?
Good thing you got that utube bank...
you should do blacked out z71 badge
When you put the 3in spindle lift on Larry you said put 2 in wheel spacers in the rear to match, if I put 4in spindle lift would I need 3in or two and a half inch wheel spacers in the back
You’d just need 2” in the rear. 4” spindles don’t increase the width more
@@jacobn3160 they won't, well that'll be great
Thanks
Thank god..
What are those steps bro? 🔥🔥
I would have gotten the plastic pieces powder coated or painted same color as truck .
Color match with paint or wrap 🤷♂️
Can I buy your factory lights!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!??????????????????????????????
Truck is 🔥
@4:01 😂😂
Dude! They sell paint color plugs for like $10 designed for this....
What kind of tires do you have?
Atturo mt
Would love to see the trail boss without the side steps
Are the mud flaps not functional?
They are and are a must if you don't want chips. Most everyone on here does the same exact things to there vehicles, year after year. Idk how people still watch.
Rough Country makes a set for half the price
Might as well modify the stock mudflap. Somebody has to come up with color matched plugs for a decent price.
There out there. been out since 2019. Look it up you tube. Mud flap Delete 2019 /20 Silverado
sharptruck.com has color matched plugs. I have a set on my 19' model