Why Did I Sell My TYM Tractor? You Might Be Surprised
Vložit
- čas přidán 23. 10. 2023
- Join the OTW Patreon Tribe: https: / outofthewoods
List of tools commonly used at my sawmill:
Logrite Cant Hook: amzn.to/48qjKEo
Logrite Hookaroon: amzn.to/48pO69Y
Anchorseal: amzn.to/48qKtk3
A Must Have Tape Holster: amzn.to/3LyLmxe
My Fav Measuring Tape: amzn.to/3ZrA4Rk
Moisture Meter: amzn.to/3LAa8xf
Oil Can for ATF Fluid: amzn.to/3Px1Mrn
Level for bed rails: amzn.to/3Zxadr1
Framing Square: amzn.to/3ZrqYnq
Nail Puller: amzn.to/3EO0Aur
Out Of The Woods Pocket T Shirts Back In Stock: farmfocused.com/otw/
Grease Zerk Metric: amzn.to/44wGaAQ
Grease Zerk Standard: amzn.to/45MC34o
Grease Gun in video: amzn.to/45xHZyy
Get your Anchorseal here: amzn.to/3KZV3EC
Support the channel and buy a T shirt!: farmfocused.com/otw/
Propane Torch Used I use: amzn.to/46YRgAW
Moisture Meter I use : amzn.to/448kbjr
Nail Gun in use: amzn.to/44V1Irb
Puller Used I use: amzn.to/3XI9Dpt
Buy this and thank me later: amzn.to/42jMdHD
Follow me on Facebook profile.php?...
Follow me on Instagram: / outofthewoodsforestry
Out Of The Woods Pocket T Shirts Back In Stock: farmfocused.com/otw-pocket-tee/
Our Online Store: www.outofthewoodsforestry.com...
If you enjoyed this video consider making a donation to help with production cost of making this free content: www.paypal.com/donate/?hosted...
Save 10% off your first Ariat order - ariat.dkkdet.net/c/3580853/69...
Subscribe to my blog: www.outofthewoodsforestry.com...
Contact Joe Maine for Silver Tip Blades: 229-563-1172
Logrite Log Scales: logrite.com/Item/log-scale
Tractors in video: TYM 574 and 754 T25
tym.world/en-us/
Channel Partners:
Woodmizer: www.woodmizer.com
TYM Tractors: tym.world
KATO: katoces.com
Log Rite: logrite.com
Blue Creeper: logrite.com/Category/bluecreeper
Rite Leg Company: ritelegco.com
Nyle dry kilns www.nyle.com/kiln-drying-syst...
Outback Wrap used on hoses in video: amzn.to/3LjNWFT
Check out the new blog post: www.outofthewoodsforestry.com...
Get your leather tape holster here: amzn.to/3y0LqxP
Join the OTW Patreon Tribe: / outofthewoods
Get your Anchorseal here: amzn.to/3mQL3lD
Sawmill Used: Wood-Mizer LT70 Super Wide
www.woodmizer.com
Mail Address:
P.O.Box 1209
Kingsport TN 37662
Follow me on Instagram: / outofthewoodsforestry
Video Tip Jar Paypal: outofthewoodsforestry@gmail.com
* Amazon Sawmill Store: www.amazon.com/shop/outofthew...
Business Inquiries: outofthewoodsforestry@gmail.com
Follow OTW on Social Media
Instagram: / outofthewoodsforestry
www.outofthewoodsforestry.com - Jak na to + styl
Join the OTW Patreon Tribe: https:www.patreon.com/outofthewoods
List of tools commonly used at my sawmill:
Logrite Cant Hook: amzn.to/48qjKEo
Logrite Hookaroon: amzn.to/48pO69Y
Anchorseal: amzn.to/48qKtk3
A Must Have Tape Holster: amzn.to/3LyLmxe
My Fav Measuring Tape: amzn.to/3ZrA4Rk
Moisture Meter: amzn.to/3LAa8xf
Oil Can for ATF Fluid: amzn.to/3Px1Mrn
Level for bed rails: amzn.to/3Zxadr1
Framing Square: amzn.to/3ZrqYnq
Nail Puller: amzn.to/3EO0Aur
Something so peaceful about sitting watching & listening to a crackling fire. Congratulations on the new tractor. I’m excited for your continued growth & expansion. Well done Nathan Elliott
Thanks 👍
What is the source of the music that you use in your videos?
@@robertgreen8695 I believe he sees iTunes or Spotify. I know he pays for the songs to use them on his posts
Gotta admit it - I'm really enjoying the bonfire & music portions of your recent videos. Very nice, very relaxing. Thanks.
Glad you like them!
I have to admit, I wish I lived closer to your location. The scrap wood you toss into the burn pile is the exact stuff I use to make things (bird houses, cutting boards, small shelves - etc. I would also use the slabs from the sawmill for firewood. Stay safe young man.
That was the best ending to one of your videos I've ever seen, and I've seen all of them !!
Thanks. I appreciate that
Best part of the day, watching the fire and sipping a beverage.
Nothing like a little banjo (maybe a mandolin) music and a rip roaring fire. 👍👊
Hard to beat
We’ve had a drought almost 4 months with a no burn warning ! I sure need to burn some scraps . Good video .
YOU KICK ASS AT SAWMILLING!
I've been subscribed to this channel for about 3 years now. This is relaxing to my senses. Keep up the great work, Nathan 👍 ! Thanks again, brother.
Well my Friend, you made my day again. Thanks for explaining and showing the taper in a log. I also understand …. “ It’s my saw mill”
Love it! If I don’t learn something new everyday the day wasn’t as good as it could have been.
Nothing beats being outside by the fire enjoying the evening.
Always enjoy watching you do this Nathan. Enjoy just about everything about your videos!
Thanks, will do!
Thanks for sharing with us Nathan, glad you did okay selling the TYM tractor and will be getting another one to replace it. Stay safe, Fred.
Thanks 👍
That was an awesome job sawing that log up the way you did! I really enjoyed it and I enjoyed relaxing by the fire. Nathan thanks !👍❤️
Thanks 👍
It's like going to someone's house, that I like, and getting to listen to all their thoughts and actions, for the day! Great vid. 👍
Glad you enjoyed it!
Love your videos, I learn something new every time. Even after watching the same videos over and over. I’m getting a sawmill in February and I feel like I’m learning a lot till then. Thanks Nathan.
Congratulations on your new mill. I made my first down payment on my used mill. I get it when he’s finished with building his custom barndominium
Glad to help
I always enjoy listening to someone knowledgeable talk.
Most people are lost on the number of years and experience it takes to really know what you're doing, so they tend to get bored listening.
And it's not just the number of years and experience, it's also the ability to retain all of it to a point where it becomes "knowledge" and also able to explain it to others in a way it can be helpful and they can learn something.
appreciate it
Good video and watching wood burning is mesmerizing isn't it?
Absolutely
You do a great job in selecting the music for your videos.
Thank you very much!
Evening Nathan, Kinda figured the tractor was about due for upgrade, 3 yrs yep that's what my Tax man says. Looking forward to seeing the new beast. I noticed that you have a Blue trailer like Mike Morgan just added to his family. Need something like that to pull behind four wheeler myself. Enjoy the burn eh camp fire. John Toccoa GA
Congratulations Nathan, not a surprise, more of a mystery to me, we automatically know you know what you are doing, cheers
The way you run your sawmill is what I call "Field Expedient" Getting it done. Great job.
Thanks 👍
Nathan, You are going to fall asleep watching that fire. If I am alone and watching a fire i will be ready for bed after about half hour. It's the best time of the day. Love it.
That's a good problem to have when you have to buy a new tractor. Looking forward to seeing the new one.
Man if I lived your neck of the woods, I'd be hitting you up for your off cuts..like the two feet off of the eight footer for custom boxes.
I see that wood go into the burn pile and 😢.
Not the sap wood. You can burn that. But even that center cut Cherry, I'd let that split out and still use it for a rustic mantle beam.
But, love your channel. Thank you.
Hey Nathan, when that fire goes out and before it rains, get all that ash and mix it in with your compost pile, your plants will thank you
Already do
Love your set up. I am working my way to that. Have an old Norwood manual mill witg extension up to 16' cut length. Gonna take some time but will have a similar set up like yours i hope .
Right on!
From my observation, you seem to really enjoy Kato - I was so amazed at how much more maneuverable and strong it was.
Seems like once you got Mr. Kato, it was time for the smaller Mr. Tym to go help out another person.
Sometimes saying goodbye to a long well serviced piece of gear is like saying goodbye to an old friend or a family pet. They've been around and seen us at our worse and our best and did their job for us and got us to where we are. I feel that way about some of my gear anyway but, hey, I'm a strange guy sometimes. 🤓
Good way to put it
I recently sold my banjo of 20 years due to worsening arthritis. I know it's basically wood and metal, but I still reminisce about the times we shared.
That's the life right there.... 🙂@19:02
Watching you chillaxing with the fire was awesome. You needed the Most Hateful Cat on CZcams by your side to complete the picture.
Where’s your son? Seems like he would enjoy the fireside at the end of day. Keep up the good work!
Best part of today’s episode
Sitting there by the fire 🔥
🍻
Nice fire, can't wait to see new tractor
You and me both!
Ya know, there's just something about listening to and watching a fire.
You need Joe Maine silver turbo tip # 7 hat band for your Outback hat, a little disclaimer not to accidently sit on it.
Good video Nathan
Thank you for the fire. Font get to sit by one much anymore.
See the hose still connected - just wondering how the DC is going and maybe an update on how it is working ??? THX
Nathan, ur Steer Skid will do the job until u get ur new tractor. great looking red oak..
Not sure how much digging you do , or , how involved your excavation projects are , but you might consider an excavator versus a backhoe , for the extra flexibility , especially if you get a thumb or grapple .
Not concerned with your " improvisational approach " to a problem .
You do what you have to .
Great video!
Thanks!
As my grandpappy would say, there's no flies on that fella . In other words, You're a smart businessman👍
Thanks for sharing.
You bet
Yeah, we were writing off our ranch equipment on a 3 year schedule back in the 70's Our entire cattle operation was just to have a write off.
Very peaceful ending Natan
Thank you
So joe main silver tipped blades are down below. So I lifted my tablet and looked. No number so I looked on my table no number I looked on the floor under the table that the tablet sits on. No number. I have 2 options now look under the house or start digging a hole. How far do I have to dig if it’s that the place. 😊
Great reflection time.
Nathan why dont you elevate the 6x6s on the floor so the logs you put on the mill roll onto the loading arms?
love music and the burn pile. good combination. ...dulcimer? or guitar and banjo? do the artists have websites?
Love it! Just now subbed 👍
Awesome! Thank you!
GOOD ON YA MATE.
That’s the way to end a day!
Enjoy your videos, can the sawn boards stacked above the blade as you are cutting place strain on the blade/motor?
It does not
Question brother, when you say "get the taper out" do you mean making it bubble level at the top or do you line the pith up front and back and level the side with the pith
Wow , give me a cup of hot brew and about 45 minutes and all will be right with the world, enjoyed every minute of your video, keep them coming. Memphis Tn
Glad you enjoyed it
Even as a non-business person, I understand the tax necessity of selling the tractor and other equipment churn. That churn enables a less established operation to get decent equipment as well.
I know there must be a business reason that so much firewood goes up in smoke in your burn pile. As a new subscriber it just shocked me at the number of slabs and rounds that went up in smoke. Great video though :)
Niiiiiice one, Nathan.
thx
You should install an outside wood fired boiler, you could heat your water for free and supplement your heat in the winter with a hot water coil in your heating system.
If I had 10k$ I would. They are expensive
Send him a new boiler
LOL
Sense these boards are going to be used as decking on trailers will you still be drying them or will they be used as is once they are cut?
Let me say that I enjoy your videos. I would like to see more sawing but they are your production and I enjoy watching. One question: the wood you burn, why do you not cut it into turning blanks and pen blanks? That would use more of the wood and make you more money with another revenue stream.
Chillin' by the bonfire. 👍
On several pacific islands I know about, Badu being one, the community lose at least one person a year venturing too close to the crocodile inhabited parts each evening in search of firewood to cook dinner . that lot you burnt there would have cooked their dinner every night for two years odd! Just Sayin!
??
Reminds me of what my parents used to say about starving children in some other part of the world when I didn’t want to eat something served for supper. If only they lived close by, they’d be welcome to it. But they don’t so whether I ate the food or Nathan burns the off cuts is irrelevant to them.
Morning guys...
Good stuff
Appreciate it
You do what you have to do to survive in the business world.
I'm waiting for the video when you finish the chicken house. I seem to remember you mentioned you were on that a few videos back. ? ? ? ?
Working on that this week actually
I miss that tractor already.
Me2
i worked for the countie in the 90s and we built some bridges useing 3" by 12" by 16 foot red oak its light aint it
Great fire Now that we have snow in Alberta I can burn dead trees and clean up my acreage Too dry in the summer
Nice plan
A mini excavator with at least a thumb if not a swivel knuckle would benefit you well. Then a basic tractor for actual tractor use..
is the tree tapered all around o jut 2 sides
That trailer looks familiar. Truck driver was cecil im guessing.
hello nathan it's is randy and i like yours video is cool thanks nathan friends randy
Good looking fire
👍👍👍🔥
I keep asking myself why does'nt Nathan put a couple 2 by 4s under the end rails so he won't have to use a cant hook to move his logs forward? Well Buddy?
Nathan what is that pile of logs at the back of the saw mill
Future sawing of course!
My friend, you need to wear hearing protection while sawing with a chain saw. I have tinnitus in both ears, mostly the left, and it is permanent and total. My ears ring all the time and it could have been avoided by protecting my ears through the years. But a Marine shooting everything that Uncle Sam has is what started it, and 30 years of Game & Fish Law Enforcement with outboard motors and firing ranges and shooting in general, have ruined my ears. The problem is, you don't get the ringing immediately, it is usually years later. I woke up one morning with my ears ringing back in 1982 and they have been ringing ever since.
Now, they provide (eyes and ears) hearing and eye protection on the range and will get on your ass if you don't use it, but neither the USMC nor DNR-LE provided them in the early years. I even used to use Winston cigarette filters as ear plugs for a while but stopped. Be good to your hearing and protect your ears and hearing with a simple set of hearing protection or plugs. Easy and cost effective. You will love yourself for it. jh
Hey did I notice a Joe Maine Silvertip in your saw? I wonder how I can get in touch with him.
lol
Even at 12:45 in the morning 😄
👍👍👍
4 hot days coming Nathan to Wv...i no its still summer where you are..haa,,,attack of the Ladybugs today,,Thousands,,make sure the doors are closed and the windows...believe it or not,it was 10:30 this morning,and it was so nice and sunny outside..i sit there for an hour,,reading mail,,and drinking coffee...shopping tomorrow....love the fire..you got another tractor right,,you mow with..yes i would get a Excavator Nathan,,,just a little bit smaller then Mikes,,,dont get no tiny one..there should be something out there..that fits your needs..dont get no sun tan now..
I really enjoy and appreciate your CZcams Channel. You have cut some of the prettiest lumber I've seen and your commentary is always informative. I always look forward to a new video from you.
Do you sell the cut-off pieces that have large knots or even crotches? It seems that the Apple, Cedar, Oak, Maple, Cherry and especially Black Walnut "scrap" pieces might be salable to woodworkers for wood turnings of bowls etc. Heck, even the stump ends of some of lumber logs might have Burls an other real crooked grain that would make a great wood turning but makes a bad board.
"hey kids, don't try this at home! (lol).. Never saw anybody get so much good lumber out of lower grade logs.....Just remember....ASslong as you've got a dump truck and a backhoe....you'll always have work.
Interesting 😊😊
Not sure if you've ever done a machine tutorial, but I would love to know what that "chandelier" of metal tines on the back of the machine does. Thanks! 😊
They ensure that cut timber comes back straight.
@@tonygrimes13 that surprises me since they seem so flimsy. Interesting!
@@lyricalgypsy They work as they stop the Lumber verying left or right.
Question: some prices/logs you burned looked like they would make good firewood. Why burn them? Is firewood a possible profit area for you?
don't have time
The old cowboys never stared at the fire.
When we have a fire like that all the neighbors come out to roast hotdogs an marshmallows .
What was that red barn, I don’t recognize it .
You’ll see
Where are the hotdogs and marsh mellows when you have a nice fire like that?
Maybe an odd question, but why don't you cut about half the log from each end so you don't have as much checking to cut out?
It’s still over the length to allow for trimming
So what day is the Reveal Day for the New Tractor Replacement.... 110 HP??? Cabbed unit???
Not important...... Stay patient
...ah, a violin or fiddle, also.🙏
Seems to me you might be able to sell some of your unusable rounds off as firewood?
Or is that just not worth your time?
It's amazing what a nice fire will do to relax the soul.
Take it easy Nathan!
Ed
Not a bad idea
Have you considered making charcoal?
Third Herd checking in
👍
yes, some of us are messing with you.. we all know that you run Joe Maine's silver tipped, turbo sevens... it's not an "OUT OF THE WOODS" video without a Joe Maine's, silver tipped, turbo seven.. LOL...
OK... I’m 12 seconds in and without reading the comments Imma guessing you sold it because you bought a bigger one.
Did I win?? 🤣