Tach installation, Minibike, Pitbikes, GY6 style,Zongshen, Daytona, Lonchin, Pirhana 190,140,125cc
Vložit
- čas přidán 15. 06. 2024
- Installation of electric tach on gy6 styled Minibike, pitbike, atv, Grom Clone ect..
Tach avaliable on eBay and Amazon
Tee Shirts avaliable :
teespring.com/muscle-minibike...
Fork tube/Frame decals 1.75 x 9" now available as well as Recoil Decals $3.00 or two for $5.00 free shipping
PayPal: rpmotorcar@yahoo.com - Auta a dopravní prostředky
![HOW TO TEST A STATOR / WHAT IS A STATOR [step by step] GY6](http://i.ytimg.com/vi/VoXYzQ61tRM/mqdefault.jpg)
As you said, there's not a lot of good videos out there that explain how to do the simple wiring. You did a great job showing us the wiring locations and showing us how simple it is to work. Great job!
Finally someone makes a good video for this install! Thanks MMB!
This is an excellent Tach installation video, finally someone who knows what he is talking about. Nice work! subscribed!
The best part is that I know what he is saying
The only vídeo made in english for this type of tachometer, hassle free right to the point
Good man..finally someone who knows what he is talking about and who speaks proper English. Thank you sir for your contribution to the human race as you have explained in language I understand how to wire up this little rev meter. Top marks..it was a great video..thank you!
Thank you
Perfect and simply put. I love it
You are the man because the directions that they're given you on CZcams has been false with color codes thank you very much you got my vote cuz I just got one of them Chinese tax runs up the 13,000 RPM for a GY6 150 just couldn't get it to work it works now you are the man
Thank you for your video omg i tried everything on myself how this damn tachometer works finally someone is genius like you figured it out i could'nt get it to work till i watched your video i swear i thought i bought a broken tachometer i was going to throw it away hahaha but when i watched your video its simple and my tach works on my motorcycle thank you again very helpful hope to see another good video from you :)
Thank you for the compliment
Exactly what i was looking for! Thank you. Iam subscribed to you
Very helpful there is not very many videos on CZcams for this
That was the reason I put one out.. Thank you for your support 😁👍
Made this sooooo easy. I looked EVERYWHERE
Very helpful video. Thanks!
Good videos so far. Keep it coming. Thanks.
Thanks ft or the support! And SUBCRIBE!
@@MuscleMinibikeBuilds already a subscriber
Thanks for the tip. Liked and subscribed 👍🏻
about to buy one today and was just wondering how it was hooked up.. thank you for thei imformative video +++
Thanks bud you couldn't have made it any easier
Simple thankyou sir 🙏
Thank you
Thanks so much bro
You look just like Don Jr. Lol. Thanks for the video!!!!
Lol... Thanks 😎👍
Beautiful intro
awesome dude thank you
Thank you for the support 😎👍🇺🇸
Thanks bud I'll be adding one to my next build #SmallEngineNation
Thanks you
thank you " great job explaining this hook up ""
Great information video you rock bud how long did it take you to get sponsors from go power sports?
Thanks, about a year
Muscle Minibike Builds that’s really cool I’m going to try and reach out to them they rock
Thanks 👍🤗🇵🇭
after testing the instructions i found that the tach is actually supposed to wire to the + side of the coil or it just grounds the sensor wire out making it not work, if the rest of the instructions are followed it will work
wired mine into the gauge cluster ground wire and main hot wire on my ignition, seems to work perfectly
So it is pin #2 on the cdi. I checked out the video but he doesn't show you any pics of where it is supposed to hook up to.
Thanks, Much
Where is the positive on a predator 212?
@@devond1 test all wires with a multimeter
generally the black and red smaller wires are for the gauge light and get wired to your other lights
green is ground
black/yellow is coil +
black is acc/hot
install with bullet shrink wrap connectors so you can switch them around in case your specific gauge is slightly different
Would this work on a bike with two coils? If so where would the yellow and black go...both negatives?
Hi, great video. I tried to install same tachometer on my yamaha bolt. Somehow i screwed up. I connected both pozitives (+) together to coil positive. And i connected both negatives also together to frame. Lights are on but tacho is not working, doesn't move at all. Do you think putting all positives and negatives together causes the problem? Or tachometer is broken maybe.
Possible bad tach
it would be nice if there some one can show how to put furl gage on those 80cc bicycle engine
thank yoouuuuuu !
You're welcome!!
Let me ask the common collective this… IS there a way, to hook up a tach this style WITHOUT having a battery??
I do not want to put a battery on my mini bike… but I want one of these style tachs. Is there anyway to utilize the coil for the hot side of the tach??
I am trying to add a digital tach to my 89 Yamaha TW200 but the coil has one positive connection from the CDI and it is grounded on the negative side. connecting the sensor wire to the positive coil wire does not make it work nor does connecting the sensor wire to one wrapped around the spark plug wire like an induction tachometer. Is there a place on the CDI unit or the stator wiring that is safe to connect the signal wire? One that will trigger the digital tachometer? And by digital I mean a number display and not an analog swinging needle.
How about on Minarelli am6 where the cdi and ignition coil are in the same thing?
I have pretty much the same tacho. Will it works on Virago 1100 _ V twin engine (2 coils) ?
On This tachometer do you need to hook up a battery, if you were to just hook it up to the ignition coil and nothing else would it work. I know the backlights wouldn’t work but I have a go kart with a 301 predator engine and trying to delay putting a battery on it as long as possible. Great video btw!
U would need a 12v source
@@MuscleMinibikeBuilds Thanks!
Nice! But what about the speedometer one??? How in gods name do you set tgat up on a Yamaha tdr 125 ??
Use a GPS style speedometer
I'm assuming yes, but would this translate to a full size bike? Like a shadow 750?
Yep it will work
opened box and wk later.. box and direction gone... tyvm .. \
will this work on a 2 cycle with an 6 volt AC points ignition?
what about those cheap 9-36v tachs with the Hall sensor?
Never used them so I couldn't tell you
Here's a question; Could I use for instance a boom vader wiring harness and plug in a vapor tech tach that way?
Possibly, how many wires are on your vapor tach?
@@MuscleMinibikeBuilds don't even have one yet. I wanted to ask questions and research beforehand. I'm thinking I'll wire the zs190->boom Vader harness -> vaportech. But I'll have to find out which model works. Also, does the stock 190 harness have headlight output? If so which wires are they.
@@jakep1799 you should be able to find the installation instructions for the vapor you want online, it's either going to have the typical 3 wire tach hook up like I show here or a pulse wire that just wraps around the plug wire and the zs190 has a lighting circuit in its harness included
nice vid but do u think u can put a gas gauge cap on a coleman ct 200u mini bike?
That's what I wanna know as well. Great question
I've never tried it
Will this work on a twin engine? Or will the rpms read half the actual rpm?
Single cylinder
Hi can i know if i can use that rpm in non battery operated motorcycle? Because my motorcycle not using any battery, but i can still run it without battery thanks! Im planning to put same rpm analog
Need a 12v source to run tachometer
What kind of small compact battery could I use if my put bike doesn't already use a battery? Just any 12v battery will work? In that case you know of a decent cheap very small 12v battery?
Also piranha 140 what is a good usable rpm range? I don't know about these engines. Redline should be???
Thanks so much
Anti Gravity Lipo battery however not cheap but the best way to go look Amazon 4,6,8 cell, remember cheap isn't good and good isn't cheap.. 😉👍
@@MuscleMinibikeBuilds i live in the world of cheap enough but good enough. I never end up on either extreme end. I don't want to pay for great, and I don't want to deal with cheap.
Also do you have a normal operation range for the paranah140? Since that's what I want a tach for. To make sure I'm not over it under revving it.
I have a scooter I want to wire one up to, but it's a DC CDI, not AC, would the wiring be the same?
Yes it should be, 12v power, and pick up off coil
Man I love my anti-gravity battery, how's yours holding up?
Great no issues I have a few 190 swapped bikes with that battery
@@MuscleMinibikeBuilds what's the standard min CCA/Amp to crank up the 190cc engines...any guide to it
I run the 4-cell anti-gravity battery when it cranks over the 190s with no problem
120 Cranking Amps
6Amp Hours
Will one of these work on a 3 cylinder bike with three coils?
If so would I have to split lead to all 3 coils?
I have a triumph Bonneville America 2011 can't work out were the tacho Sencer wire goes can anyone help I fitted wire to coil but no joy ,,,help
The concept of the wiring is all the same, no matter the size, maker or age of the engine, as long as its wired exactly the same, correct?
Yep
What if the bike has no battery, kickstart only?
It needs a power source, so if you have a regulator rectifier and a 12v output source for lights your good
the one i ordered looks like this, but red, black, green wires - no instructions. thoughts?
How many wires total
@@MuscleMinibikeBuilds 3, I kinda got it figured out. Red and black were power and ground. Green found a signal tied to the CDI box. Though after about a day it stopped working the signal jumps all over the place and haven’t had a chance to mess with it again
I missed it - side of coil ? . No pics not helpful. Please show us ?
I agree......how do you know where there negative side is?
Negative side of coil the side the comes off the plug or spade connector on the coil going to ignition usually Green
The tachometer does not exceed 6000 rpm, although the engine operates at a higher rpm.
Why?
My tach goes to 9500 on my 190
That engine is it 4 stroke 1 cylinder?
Yes it is
What is the coil
Can this work the same with a go kart with a predator 212 engine ?
Right that’s what I’m trying to find out
If you had a 12v source to run the tach then yes
I dont think it idles at 2k rpms...isn't that reading high?
No, 190's idle 2000-2100
Would this work on a kx100?
Yes it will
I have Zongshen RA01 with Delphi MT05 module. Do you know how to install this tach on this module?
Not familiar with it, what is it
@@MuscleMinibikeBuilds This is ECU (Engine Control Unit), for example: srotas24.lt/motociklu-dalys/motociklu-elektros-uzdegimo-dalys/kitos-elektrose-dalys-motociklams/blokas-valdiklis-ecu-benelli-bn251-tnt25-tnt250-bn-17201874128.html
My bike is from 2019 and has electronic fuel injection on this module. I tried all known connection methods and it still doesn't work.
My bike is called Junak (in Polnad), but Zongshen is the same model (made in China).
If mine isn't working when connected to the negative terminal, is the tacho the problem?
Yes
@@MuscleMinibikeBuilds thanks. I told the supplier it may be faulty and they said I wired it wrong and had to connect signal line to speed signal Line of the motorcycle. Could this be correct?
If you wired it right and it dose not work it's the tach
Think my tach i bought is faulty. It wont go past 4000rpm
It could be, but try it on something else to make sure
Thats not a gy6. The gy6 is the little 50-150cc engine with the cvt.
Nobody said it is, the video illustrates how to install on a gy6, or Pitbike style engine as laid out in the title... 😉👍
Get a hell of a sense of humor to You Make Me Laugh Stephen Annapolis Maryland thank you for the information with the tack because the information that they give you when you try to CZcams it they give you the wrong information with the color codes I cannot believe it I wrote this one down I just got 1M tax from China