Thanks for that walk around, surprised me how much deck space you’ve got. I’ll second the horizontal rod holders for snapper, If I’m fishing with my young bloke we use a 3 bank snapper rack each side, $40 each I think, bloody great.
Yeah it's a good amount of space. Not having that front bench seat is the big winner allows me to use the Esky as a seat and save room. Yeah that's the rod holders I want the 3 bank ones
Great vid. Your sounder is fine - the transducer is too close to the motor, which is why it's struggling at speed. Cavitation from the motor will interfere with the signal - move transducer as far away towards the edge of the boat as possible.
Cheers Ryan that's an epic catch from a 3.8m tinny. I'll be posting regularly really want to make this work and am really appreciative of all the positive comments and new subscribers
It dose look like an old stacer seahawk or a little runabout normal on the old stacers the builders plate is at the front under the bow its a little redish coloured plate the shape of a football oval 😂 anyways nice vid mate thats a decent little rig
Very useful vids mate for the small boat owner. Can you make a video on the conditions you might go out in this for snapper eg carnac, the five etc. How you anchor, depth etc I reckon it would be great to have a general walkthrough to see what's safe
Under the front there if ya lucky an you got an old sea hawk like me you'll have a builders plate hidden Under the front there it's normally red for the older ones
Hey Caleb. Unfortunately I sold the little beast. My best mate passed away last month and he left me his boat. A 16.8' Haines. So I sold my tinny to spend the money on finishing off the Haines
@@RedemptionTackle sorry to hear mate my condolences well I'll be looking forward to the vids on the new boat if I where you I'd have done the same thing give you that bit more budget to really do up your mates old boat the way he would have wanted any way sorry again for your loss and I'm gonna stay tuned for the new boat good luck with it mate and much respect hey that's a really good thing to do
Hey Mat these models are only GPS chart plotter and they aren't compatible with a chart card Any of the hook X models are standard chartplotters and can't take a card unfortunately
My Garmin is like that but I can mark waypoints, as long as you know what ramp you left from you can get back to spots but doesn’t show the map just the track and point, my boat is smaller though too so don’t go too far, nice setup mate, and the tohatsu I had was a great motor!! Thanks for the vid buddy!!
Hey George. I purchased the anchor well from a boating store and got the grinder out and went to town on the front of the boat. Slotted the anchor well in. Drilled holes . Sikaflex and pop rivets. Run hose from the drain holes out the back of the boat
Yeah the anchor is a pain in small boats. Takes up unecessary space. That set up frees up alot of room. Just recommend ensuring its secured when traveling as it bounced out on me coming through a reef passage with some big swells wasn't a fun time
Hey mate. Yeah I actually sold this little tinny and now have a 4.6m Haines hunter. The sounder I have now is a Lowrance elite 9 TI 2 and it's fantastic. Honestly can't recommend it enough.
@@RedemptionTackle I got hold of a 3.95 Seajay 30hp mercury . I just want to do the gold coast rivers,creeks and seaway just slowly transforming it to a little fishing vessel .Have you done a video of your HH , sounds great
Thanks for that walk around, surprised me how much deck space you’ve got. I’ll second the horizontal rod holders for snapper, If I’m fishing with my young bloke we use a 3 bank snapper rack each side, $40 each I think, bloody great.
Yeah it's a good amount of space. Not having that front bench seat is the big winner allows me to use the Esky as a seat and save room.
Yeah that's the rod holders I want the 3 bank ones
Great vid. Your sounder is fine - the transducer is too close to the motor, which is why it's struggling at speed. Cavitation from the motor will interfere with the signal - move transducer as far away towards the edge of the boat as possible.
You do a very understandable video mate.
Cheers mate. Glad you enjoy them
Nice little rig. I caught my biggest dhui out of a 3.8m tinny behind garden island, was over 1m and 15/20kg. Keep the vids coming! Love local content🤘
Cheers Ryan that's an epic catch from a 3.8m tinny. I'll be posting regularly really want to make this work and am really appreciative of all the positive comments and new subscribers
It dose look like an old stacer seahawk or a little runabout normal on the old stacers the builders plate is at the front under the bow its a little redish coloured plate the shape of a football oval 😂 anyways nice vid mate thats a decent little rig
Very useful vids mate for the small boat owner. Can you make a video on the conditions you might go out in this for snapper eg carnac, the five etc. How you anchor, depth etc I reckon it would be great to have a general walkthrough to see what's safe
Hey Vincent I sure can mate. I'll film that this weekend and post up
Under the front there if ya lucky an you got an old sea hawk like me you'll have a builders plate hidden Under the front there it's normally red for the older ones
Also great vid mate your pretty much doing what I am old boat fix it up and have a blast fishing I'll be watching for more vids lol
Hey Caleb. Unfortunately I sold the little beast. My best mate passed away last month and he left me his boat. A 16.8' Haines. So I sold my tinny to spend the money on finishing off the Haines
@@RedemptionTackle sorry to hear mate my condolences well I'll be looking forward to the vids on the new boat if I where you I'd have done the same thing give you that bit more budget to really do up your mates old boat the way he would have wanted any way sorry again for your loss and I'm gonna stay tuned for the new boat good luck with it mate and much respect hey that's a really good thing to do
Thanks Caleb. Boats currently with the mechanics getting the motor service and fixed. Once it's back there will be plenty more videos to come
@@RedemptionTackle wicked work mate keep it up an good job hey
love videos like this but can never find them I subbed and like also you can always give me the sounder lol
Hahahha. I sold that tinny unfortunately
@@RedemptionTackle what for did it have a problem
No it was a great boat. I inherited a larger fibreglass boat
@@RedemptionTackle alright well now I going to watch that vid and going to like and watch all your ads ok.
Me and my friends are going to save up for a tinny
Hell yeah. That's a great idea. Nothing better than a tinnt
Looks abit like my gannet
I think this was an older model stacer
Try to check if its got a map sd card in the sounder likly had been taken out when they parted ways with it.
Hey Mat these models are only GPS chart plotter and they aren't compatible with a chart card
Any of the hook X models are standard chartplotters and can't take a card unfortunately
My Garmin is like that but I can mark waypoints, as long as you know what ramp you left from you can get back to spots but doesn’t show the map just the track and point, my boat is smaller though too so don’t go too far, nice setup mate, and the tohatsu I had was a great motor!! Thanks for the vid buddy!!
Great Vid !! Q: do you need a licence ? How time consuming is it
Hey mate. You'll need a license for a boat with a motor larger than 6hp
@@RedemptionTackle Is it time consuming and costly mate ?
One day course about $220
Love the anchor position up front. Would like to know how you made it.
Hey George. I purchased the anchor well from a boating store and got the grinder out and went to town on the front of the boat. Slotted the anchor well in. Drilled holes . Sikaflex and pop rivets. Run hose from the drain holes out the back of the boat
@@RedemptionTackle cheers! The anchor bracket/holster on the nose is 👌
Yeah the anchor is a pain in small boats. Takes up unecessary space. That set up frees up alot of room. Just recommend ensuring its secured when traveling as it bounced out on me coming through a reef passage with some big swells wasn't a fun time
@@RedemptionTackle Noted - In big swell that wouldn't have been a walk in the park!
Na it was pretty intense getting the anchor back in the boat
Use your drag
I’ve heard about those Larance hook 5 got bad reviews iam probably gonna go with a Garman striker 5cv has better reviews
yeah at that price range i would recommend the garmin
Hey mate did you decide on a fish sounder. Im in the market to get one for my tinny. Id like your thoughts Thanks
Hey mate.
Yeah I actually sold this little tinny and now have a 4.6m Haines hunter.
The sounder I have now is a Lowrance elite 9 TI 2 and it's fantastic. Honestly can't recommend it enough.
@@RedemptionTackle I got hold of a 3.95 Seajay 30hp mercury . I just want to do the gold coast rivers,creeks and seaway just slowly transforming it to a little fishing vessel .Have you done a video of your HH , sounds great
I haven't yet. I really need to film it. Been so busy catching crayfish lately
Those little seajays are epic little tinnys
Nice setup, I love the box, where did you bought it? And if you have an SKU?
Which box ?
@@RedemptionTackle The white one, I think in english is called a glovebox. You call it "this bad boy", it has a knife Andrés scissors
Andrés=and
m.catch.com.au/product/tinnie-bait-storage-bin-with-bait-board-6603571/?gclid=Cj0KCQiA6t6ABhDMARIsAONIYyyDoQ5JxP_awMfPITeyHLQczfSO41J6SGO_g9SckbvP_zgw3rm_OGUaAs_PEALw_wcB&offer_id=33548484&ref=gmc
@@RedemptionTackle You are the best!! Thanks
You need to mount your nave lights correctly.
they are mounted correctly, nothing wrong with there they are mounted, Degrees are fine and legal
The trigger me when you turn the fish finder on on land
Why ?
Because your not meant to
Running the transducer out side of water for long periods of time can cause issues. A short time won't hurt it.
Me and my friends are going to save up for a tinny
Hell yeah dude. Nothing better than your own tinny