Orangatang Dad Bods on the Pantheon Supersonic - Will it work
Vložit
- čas přidán 8. 09. 2023
- #longboard #Ortangatang #Pantheon #Experiment #ldp
I tried the DadBods with the supersonic, fun but bad for deep pumping.
Larger Hangers made it even worse.
So fine for pushing, not fine for pumping.
Song: Asketa & Natan Chaim - More [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/more
Watch: ncs.lnk.to/moreAT/youtube
I used 3/8 ich risers in front and 5/16th in the rear and it was wheelbite free (40° bear Gen 6 130mm)
Like you said, Not the lowest set-up but still decent.
90mm wheels are probably ideal.
I run these on my Super with 165mm RPK paris with flipped dad bods in the front and 130 TKP paris in the rear with flipped dad bods, wedged, and 1/8 riser. Flipping the dads on the 165mm truck gives you the leverage of a 145mm truck. I also run orangatang purple nipples on the board side with orangatang orange cone, flipped, street side. This helps the truck to turn out, instead of in towards the board.
Wow, thats an interesting way to have it setup. How is the hight difference from front to back ?
It's pretty even. The deck is level. And by flipped I mean the wheels are on backwards with the rear graphic facing out. This gives me a super narrow rear with everything tucked up under the rear of the deck. I have gotten some wheel bite on the front but as it's now the less supported outer rim catching the board the wheel bite is more of a smear, and there's no stopping it.
Try Riptide Magnums board-side with Riptide Canons road-side to restrict the turn.
Hey thanks for the hint, are there compatible ones for bear trucks?
And wont that be an issue for Pumping if they deflect less ? ?
Nice & Thanks :)
🤙🏼🤙🏼