Is this something that only works for audio playing externally or can you set up the "loop" through the headphones and switch to the other channel quietly?
My god. If you pull this off in a dire moment you deserve to see somebody’s boobs. That’s a great trick thx, hopefully one day I can use it to be a hero and see those boobs
I’ve tried this but it looses the sync super fast. For example, recording a 4 beat loop and sending it to another channel, the loop starts moving faster or slower and I can’t use it for more than 16 beats, for example
@@ddarhe i tried it, it doesn't switch over. I read in the comments below (the thread by @T-Dubbie Dubb) and according to that it can only change if the channels are in line mode, but since you have 4 decks, you can just load the song you want to add the roll on a spare channel and use it to add samples on the main songs you're playing
Really sick trick! I was wondering how you pulled it off in another video. Thanks for sharing! This is a great use of a channel that would otherwise go unused unless I was using my laptop or another device.
I really liked the explanation and approach. Quite a unique use of the Roll FX. Question. what course would be suitable if I play on Pioneer 3000 + DJM-900NXS2 Mixer? My style of music - deep house, organic house, tech house. Interested in effectively using Effects on the DJM-900NXS2 to unleash my creative potential. Before this, no one taught how to use effects. the knowledge that I have now came through experience or a basic understanding of what Deleay, Echo, Reverb represents
Is this possible on a V10? I couldn't seem to send the roll loop over to a new channel just by hitting the "beat FX assign" on the channel I wanted to send it to. Thanks for the videos too, super helpful!!!!
@@danielbarrell7008 as long as you leave the effect switched on once you record the sample it will keep the same sample in a buffer memory until you switch the effect button off. You can bring it in and out of a mix using the dry/wet knob on the mixer. So you can bring your roll onto any channel you want
@@danielbarrell7008 you set it to what you want- 1/2 beat, 1 beat, 2 beats, 1 bar etc. and then as soon as you hit the on button (for the effect) the clip is recorded. The sample is then controlled using the Dry/wet knob
I use this so much and now the Denon's have it too (but it is unreliable as it anchors its bpm to a deck). Why doesn't every platform have this effect and anchor it to the master bpm!?!? This basically is removing much of the need for a third deck let alone a forth for the vast majority of DJs.
has anyone solved the issue of the beat drift when using the roll effect on cdj3000s/DJM900nxs2 or DJMA9? Crossfader do you have any clues on this please?
Neat feature man, i bet their are many who have access to the Roll feature who don't know what it does :) Every time i see this controller i want to physically strangle the dude who decided to make Decks 3 & 4 none Stand alone on a Stand alone Controller.
That's a marketing decision. If that was the case they wouldn't sell as much DJM900 and CDJ 2000 Nexus 2. From a comercial perspective it does make sense as the all in one unit costs 1/3 of the price of the full nexus setup.
Jamie, please help me and tell me, can you do this trick with roll, activate roll and move roll to another channel on the djm-v10 like nxs2 or this is impossible? Because i must know before purchase.
@@Crossfader ok, but if i have v10, can i used one channel for send and activate one build-in effect but turn on minimum and used for this channel roll beat fx? will be work the same?
I really love your videos. So creative! I am planning to trade my Roland 707M for the Pioneer ddj 1000 SRT. Although I like the compact size, I don't really need the portability that the 707M offers and I find the fact that you have to go through button pushing and knob turning to assign the on-board effects or change them on the unit. I am really impressed with the Pioneer ddj 1000SRT, and I am already getting the XP2 so that I will have access to the Serato effects as well. I did see a comment that said that this trick will work on the 1000SRT. I went to the link for the Pitch Effect Trick, and was wondering if that will work on the 1000SRT also. I can't afford any of the X models at this point in time. I really like the stuff you come up with and as soon as I get my rig figured out, I plan to take some of your classes. Thanks!
The DDJ 400 can't output more than 2 channels sadly. This trick can work with roll but you can’t switch it to a spare channel. You will have to keep it in channel 1 or 2.
Před 3 lety
@@Crossfader Just tested it out, it's indeed so bizarre...You can have 4 decks playing, but you can't send FX to the other 2 decks
After you have recorded the loop and switched it over to new channel, will the loop still play in the new channel if you change the song on the original channel?
Nice trick! One thing I dont get: How does the looped sample switch channels (5:30)? I can see that channel 1 is receiving gain JUST as you pull down the volume on channel 1.
So the recorded sample can be switched over to any spare channel after its recorded in. This is done earlier in the walkthrough. Then at 5:30 all I’m doing is playing the original song again on channel 2 while pulling down fader on channel 1 (the recorded sample).
Please help me out. When I try this trick on my RX2, after I switch the roll loop to the aux channel, it always goes out of sync with the other channels pretty fast. Why does this happen? It's as if the the Beat fx bpm is not correct, but it is on auto mode and quantize. Am I doing something wrong?
That's strange, maybe try tapping the tap button once so it switches to manual bpm mode before activating the effect and then switch it over. See if that helps. It should stay in time though....
There is a roll effect on the ddj 1000 however I would probably recommend using the roll on channel 3 for example and leaving it on that channel as a sub layer. I think the ddj-1000 won’t switch it over to an empty channel unless you activate the channel as a line output rather than usb.
The ddj-400 doesn’t have 4 channels on the controller itself so you wouldn’t be able to switch the roll sample you’ve recorded o to channel 3 for example on the controller. But you could still use the roll as demonstrated and keep it on channel 2 for example.
@ ok here is how I figured it out so far.......the only way that I can do that is if any channel is selected to line mode and I apply the effect to any channel ( only switched to line mode) the effect will follow but if I do the same test let's say I use channel 2 and select USB A ( which that's what my computer is connected to) now I can't carry the effect over to another channel (even if the channel is on line mode)
I would recommend because your controller already has access to 4 decks and 4 channels, load the song you want to sample and record in on channel 3 for example, record it in and leave it on channel 3. You still have the other channels available to continue mixing etc.
Pitch Effects Trick Tutorial (mentioned in the video) & Sign Up for Crossfader Music Pack: wearecrossfader.co.uk/pitch-effect/
Is this something that only works for audio playing externally or can you set up the "loop" through the headphones and switch to the other channel quietly?
I've had that same rig for 6 months and didn't know that was an option. Crazy.
One of the most powerful uses for this trick is it can allow you to play off one CDJ in an emergency situation.
My god. If you pull this off in a dire moment you deserve to see somebody’s boobs. That’s a great trick thx, hopefully one day I can use it to be a hero and see those boobs
Brilliant tip; had no idea this was possible!
Enjoy playing around with it!
This is just so great. It brings up mixing to the higher level. Thanks for this lesson!!!
I’ve tried this but it looses the sync super fast. For example, recording a 4 beat loop and sending it to another channel, the loop starts moving faster or slower and I can’t use it for more than 16 beats, for example
Have you tried using sync?
@@Vagab0nd not yet. I was trying it just with a single CDJ and the mixer. Let's try. Thanks
same - I've tried all kinds of varying settings on cdj3000/djma9, 900nxs2. Do you figure out a solution?
Got my XZ two days ago, deffo gonna try this!
Great to hear!
i wanna buy it to xz😢
How much you pay for them? & where or did you finance them
😱 I had no idea u could use another channel like that! Can’t wait to try this on my ddj1000
does it work? i see some people in the comments not being able to pull it off? (I'm looking to purchase the 1000 soon, just curious :D )
@@ddarhe i tried it, it doesn't switch over. I read in the comments below (the thread by @T-Dubbie Dubb) and according to that it can only change if the channels are in line mode, but since you have 4 decks, you can just load the song you want to add the roll on a spare channel and use it to add samples on the main songs you're playing
@@djeazyryder gotcha, thanks man :)
So crasy ! Clear and direct. Perfect !!!
Thanks for watching!
Roll comes in damn handy when doing vinyl sets, I love it!
I tried it on my ddj 1000. ist doesn‘t work. If i Try to Switch the roll effect to another Channel, i lost the effect. Maybe i do something wrong?
same on ddj800, help...
Wicked video🥇🥇🥇🥇 hope to see more of these tricks, perhaps on the DJ-1000🙌🙌🙌
Really sick trick! I was wondering how you pulled it off in another video. Thanks for sharing! This is a great use of a channel that would otherwise go unused unless I was using my laptop or another device.
I really liked the explanation and approach. Quite a unique use of the Roll FX. Question. what course would be suitable if I play on Pioneer 3000 + DJM-900NXS2 Mixer? My style of music - deep house, organic house, tech house.
Interested in effectively using Effects on the DJM-900NXS2 to unleash my creative potential. Before this, no one taught how to use effects. the knowledge that I have now came through experience or a basic understanding of what Deleay, Echo, Reverb represents
Class tutorial mate
Man this opened my mind up to so many possibilities! Thank you!
Thanks a lot for this trick... looking forward for more tricks on the xdj-xz.
There will be more coming for sure!
This is brilliant man! hope i can use it on my ddj 800
This is just wow, need to try it, love my XZ👍😃
Is this possible on a V10? I couldn't seem to send the roll loop over to a new channel just by hitting the "beat FX assign" on the channel I wanted to send it to. Thanks for the videos too, super helpful!!!!
@Lior no, haven’t been able to figure it out or get an answer
Jamie is on the money ❤👍👍👍👍👍
Love the roll effect. I also use it to create a loop on the mic...when I am feeling confident my voice is good enough live haha
How does he carry the roll effect over to another channel. Do u k ow?
@@danielbarrell7008 as long as you leave the effect switched on once you record the sample it will keep the same sample in a buffer memory until you switch the effect button off. You can bring it in and out of a mix using the dry/wet knob on the mixer. So you can bring your roll onto any channel you want
@@djkarlthomas does it automatically record the sample? (appreciate it)
@@danielbarrell7008 you set it to what you want- 1/2 beat, 1 beat, 2 beats, 1 bar etc. and then as soon as you hit the on button (for the effect) the clip is recorded. The sample is then controlled using the Dry/wet knob
@@djkarlthomas greattt
Wow this is so brilliant! Damn!
Glad you thought so!
boutta pull some footwork vocals chops
Really good Tutorial
Thanks!
Great tutorial! Thank you 🦾
in this way you can mix two track from the same vinyl looping the first anche moveing it to the other channel
I use this so much and now the Denon's have it too (but it is unreliable as it anchors its bpm to a deck). Why doesn't every platform have this effect and anchor it to the master bpm!?!? This basically is removing much of the need for a third deck let alone a forth for the vast majority of DJs.
nice never knew you could do that with the roll thanks!!!!!
has anyone solved the issue of the beat drift when using the roll effect on cdj3000s/DJM900nxs2 or DJMA9?
Crossfader do you have any clues on this please?
Neat feature man, i bet their are many who have access to the Roll feature who don't know what it does :)
Every time i see this controller i want to physically strangle the dude who decided to make Decks 3 & 4 none Stand alone on a Stand alone Controller.
That's a marketing decision. If that was the case they wouldn't sell as much DJM900 and CDJ 2000 Nexus 2. From a comercial perspective it does make sense as the all in one unit costs 1/3 of the price of the full nexus setup.
Genio!! muy útil su aporte
Agradecido como siempre, saludos from Argentina:)
haven't tried switching it to channel 3 to free up 1, going to try that...thanks
Killller FX lesson fellas 🤘🏼👌🏼🔥
That’s a really handy trick thanks for it
Jamie, please help me and tell me, can you do this trick with roll, activate roll and move roll to another channel on the djm-v10 like nxs2 or this is impossible?
Because i must know before purchase.
Unfortunately this isn’t supported on the djm-V10. It does work on the NXS2 though.
@@Crossfader ok, but if i have v10, can i used one channel for send and activate one build-in effect but turn on minimum and used for this channel roll beat fx?
will be work the same?
Awesome!! Thank you for this!🙏🏾🙏🏾
I can only do 4 beats or lower for some reason on this xdj-xz. Is there a reason why?
Love the trick however it doesn't work on the DJM-V10? Or does it? Am I missing something 🤷♂️
Ddj1000 also does this, but the new v10 does not.
I did the same way, but I could not duplicate the technic. It does not record the roll. Can you think about why? I am not sure :(
Good stuff Jamie ✌️
Amazing effect!!!
thank you. great tutorials
Sweet trick! Thanks!
Quality technique this! has anyone successfully used this on any other songs?
I really love your videos. So creative! I am planning to trade my Roland 707M for the Pioneer ddj 1000 SRT. Although I like the compact size, I don't really need the portability that the 707M offers and I find the fact that you have to go through button pushing and knob turning to assign the on-board effects or change them on the unit. I am really impressed with the Pioneer ddj 1000SRT, and I am already getting the XP2 so that I will have access to the Serato effects as well. I did see a comment that said that this trick will work on the 1000SRT. I went to the link for the Pitch Effect Trick, and was wondering if that will work on the 1000SRT also. I can't afford any of the X models at this point in time. I really like the stuff you come up with and as soon as I get my rig figured out, I plan to take some of your classes. Thanks!
@crossfader Loving the trick! Nice work! ... is it possible on DJM-V10? Without the channel dial, I can’t work how to do it with the FX Assign buttons
Please make more videos like this.
Are the songs in the music packs originals? If not, what are the artist names for the songs used in this trick?
Crazy trick man, unfortunately can't do this on my DDJ400.
Yes you can, the effect is in there, but you will have to "send" it to the deck 3 or 4 in Rekordbox instead of your DDJ.
The DDJ 400 can't output more than 2 channels sadly. This trick can work with roll but you can’t switch it to a spare channel. You will have to keep it in channel 1 or 2.
@@Crossfader Just tested it out, it's indeed so bizarre...You can have 4 decks playing, but you can't send FX to the other 2 decks
@ Can you move it into the master channel then use level/depth to control how much is mixed in?
@@curtisfalkenberg3416 That's a nice idea, I will try it soon and let you know!
If you connect a laptop to this can you use the 4 channels then or only when you connect a cdj or another device is when you can use an extra channel?
How does he 'carry' the roll effect over to the other channel?!
Simply change the fx knob from 1 to 3
@@jpburguete8466 doesn't work on my ddj1000
@@danielbarrell7008 i just tried it on my ddj-1000 srt and it worked.. idk if it works for recordbox
@@jpburguete8466 thanks bro
thx. but how can you do this in the RX2 again?
After you have recorded the loop and switched it over to new channel, will the loop still play in the new channel if you change the song on the original channel?
Nice trick! One thing I dont get: How does the looped sample switch channels (5:30)? I can see that channel 1 is receiving gain JUST as you pull down the volume on channel 1.
So the recorded sample can be switched over to any spare channel after its recorded in. This is done earlier in the walkthrough. Then at 5:30 all I’m doing is playing the original song again on channel 2 while pulling down fader on channel 1 (the recorded sample).
Can switch with the loop on 900nx2 when using NXS2's? I'm used to doing this on S9 with Dex, Nice vid
Yes, of course
On my ddj1000 how do.o carry the affect over to another channel
The switching sample to another channel doesnt work on the DDj FLX10 DAMMIT
how do you key shift?
very very well done!
Amazing!
what pioneer controller is that?
Nice
Thanks
damn this is powerful
the xdi xz beat fx are they an instant kill when disengaged or prolong until you turn down depth/level knob right down?
It depends on each individual beat fx
Does this trick also works with RekordBox DJ software?
can this work with ddj800
can you do it on rx3?
Nice trick
What genre is this? So cool!
Whow i need to practice this 🤣 thanks 👍🏾
is that possible with 2ch rx3 or must 4 ch ?
So the ddj 1000 is able of that too?
Hi Jamie, try do this trick on djm-v10 for us.
This is possible?
loop recorder like in traktor
Can this work on the SR2?
How does it work on the xdj-rx2?!
Please help me out. When I try this trick on my RX2, after I switch the roll loop to the aux channel, it always goes out of sync with the other channels pretty fast. Why does this happen? It's as if the the Beat fx bpm is not correct, but it is on auto mode and quantize. Am I doing something wrong?
That's strange, maybe try tapping the tap button once so it switches to manual bpm mode before activating the effect and then switch it over. See if that helps. It should stay in time though....
can i do this on the ddj 1000
There is a roll effect on the ddj 1000 however I would probably recommend using the roll on channel 3 for example and leaving it on that channel as a sub layer. I think the ddj-1000 won’t switch it over to an empty channel unless you activate the channel as a line output rather than usb.
good stuff
how can this trick be accomplished with a cheaper board? I have a Hercules Jogvision $250 and Serato Pro
You can find the roll fx in the fx menu at the top of your screen and should be able to scroll through and find roll
is it possible to switch to the second channel also with ddj400 ?🙄 I tried it, but didn't work.
This trick can work with roll but you can’t switch it to a spare channel.
You will have to keep it in channel 1 or 2 sadly.
Good oneee
First track name please🙏
👏
Why wouldn't a DDJ400 be able to do this? I have the required FX and buttons to do it
The ddj-400 doesn’t have 4 channels on the controller itself so you wouldn’t be able to switch the roll sample you’ve recorded o to channel 3 for example on the controller. But you could still use the roll as demonstrated and keep it on channel 2 for example.
Did anyone notice the crossfader logo in the jogwheel? How the hell did you do that Jamie? 😆
album art ;)
Why can't you keep your hands still when talking, Jamie?
I wish my ddj 1000 could do that 😞
Nevermind I figured it out.....I have to select line in order to move the beat fx over to the channel that I selected 😁👍
It's a mixer effect, you can do it through Rekordbox. I use it on DDJ-400 quite frequently.
@ ok here is how I figured it out so far.......the only way that I can do that is if any channel is selected to line mode and I apply the effect to any channel ( only switched to line mode) the effect will follow but if I do the same test let's say I use channel 2 and select USB A ( which that's what my computer is connected to) now I can't carry the effect over to another channel (even if the channel is on line mode)
I would recommend because your controller already has access to 4 decks and 4 channels, load the song you want to sample and record in on channel 3 for example, record it in and leave it on channel 3. You still have the other channels available to continue mixing etc.
@@Crossfader ok sounds good brother... I'll have to try it sometime soon 😁👍
😮
This is the shit!
Can you not redline pleeeease
Good feature, but tbh that demo sounded awful...
Sorry you weren’t feeling the demo but hope you can take the concept and make it your own.
You should name this video how to cue not use fx roll, learn that first
Very nice 😍💋 💝💖♥️❤️
2:32 I like that😍💋 💝💖❤️
Nice