I've had them with the washer and with it missing only thing I could see it do if missing is let the dust seal move up towards the circlip as when its on and the circlips on its a tight fit it keeps the dust seal pushed down m8
M8 I will check tommorow and see if the washers that's available on cmsl and fowlers what u drive the top Bush in with (with the flat side and rounded side) are same width as top washer if you get this meesage remind me on tommorow
@@2strokemxclassics Thanks a lot, is there somewhere to get a parts list to go through? Amazing how much stuff some people get wrong, some really shouldn't be allowed spanner's without supervision.
Yeah m8 just go onto fowlers website, it's number 7 and number 3 on the forks diagram m8 put year 2002 cos some times if you put 1991 the bits aren't listed
@@2strokemxclassics Excellent, parts lists are handy. Are you confident the bottom washer fits on top seems odd they would have a different part number if the same size.
nice one m8, i've rounded off one of my fork bolts b4, i tried using extension bars to hold the damnper :-( didn't think of using the rear wheel spindle, did you need to modify the spindle bolt to hold / fit inside?
bro through everybody else, your work is the hest
Thanks a lot m8 really appreciated 👍🔥
Top lad they can be a bugger to get out nice one m8
Cheers boro
If i brought my bike bits in the house my Mrs would kill me lol
🤣🤣👍
lol same here, most i get away with is engine rebuilds up the table :-) I built a shed in the garden for the bikes instead :-)
The single life 💯women are a huge distraction they send is crazy ad hadda sell me bikes again
@@2strokemxclassics 🤣🤣👍
@@2strokemxclassics Its o.k if you have the right woman mate. You got to get a woman that appreciates a man that's good with his hands.. 😁🙈.
Hi mate, do you know the size of the bolt inside that you need to hold to release the damper rod?
It's the same size as a swinging arm bolt m8 19or 21 mm whatever the swingarm bolt is
@@2strokemxclassics Ok mate cheers 👍
No probs m8
@@DaMuShErZ it's 27mm m8 sorry bowt that just checkd the tool it's a back wheel spindle
The washer that's goes on top of the dust seal and under the clip is it needed mine don't have them and I can't find any on the fowlers website
I've had them with the washer and with it missing only thing I could see it do if missing is let the dust seal move up towards the circlip as when its on and the circlips on its a tight fit it keeps the dust seal pushed down m8
M8 I will check tommorow and see if the washers that's available on cmsl and fowlers what u drive the top Bush in with (with the flat side and rounded side) are same width as top washer if you get this meesage remind me on tommorow
If those washers above the bushing are the same I might have spare ones on a broken set of forks
OK bro I've just woke up ill check soon for you an measure the thickness and compare them to each other👍
Just checked the spare set of forks I have and found a pair they are a bit rusty but they should clean up nice. Apreciate your help and thank you
Someone else asked about the washer's under the clip, do you know if they can be bought anywhere? Need to buy clips anyway.
I don't think they make them anymore m8 it be best to buy a cheap set of rusty forks just for the washer
M8 go onto fowlers I've just checked they have the washer and clip
@@2strokemxclassics Thanks a lot, is there somewhere to get a parts list to go through? Amazing how much stuff some people get wrong, some really shouldn't be allowed spanner's without supervision.
Yeah m8 just go onto fowlers website, it's number 7 and number 3 on the forks diagram m8 put year 2002 cos some times if you put 1991 the bits aren't listed
@@2strokemxclassics Excellent, parts lists are handy. Are you confident the bottom washer fits on top seems odd they would have a different part number if the same size.
nice one m8, i've rounded off one of my fork bolts b4, i tried using extension bars to hold the damnper :-( didn't think of using the rear wheel spindle, did you need to modify the spindle bolt to hold / fit inside?
I just welded the nut so it doesn't move m8
Hello m8t any chance u can do a water pump seal on a ktm 85 I have the kit
How many miligrams ml of oil
What year bike