HOW TO SPRAY CHALK PAINT WITH THE 3M ACCUSPRAY GUN
Vložit
- čas přidán 10. 09. 2024
- Hello CZcams world! In today’s video we will transform an abused pair of nightstands with the help of my 3M Accuspray gun. Learn how I spray chalk paint for a professional look!
New videos released every 1-2 weeks! With each video learn how to update and give second life to old, outdated, dusty, worn pieces of furniture. If you haven’t already head on over to my channel and make sure to subscribe. / @sabsrehabs
Thank you for watching! Shop products used from the links below!
Products disclaimer: Some of these links are affiliate links in which I am paid a small commission. It costs you nothing extra to use these links. By using the provided links you are helping support my channel, which I am extremely grateful for. All products I use are my own opinion. Thank you so much!***
Shop my Amazon Store! It costs you nothing extra and I get a small commission, so win win! urlgeni.us/ama...
Surfprep Sander: surfprepsandin...
Black and Decker Mouse Sander:urlgeni.us/amz...
Klean Strip Stripper 15 minute formula: urlgeni.us/amz...
Mineral Spirits: urlgeni.us/amz...
Steel Wool #0000: urlgeni.us/amz...
Bahco Carbide Scraper:urlgeni.us/amz...
Varathane Gel Stain in Briarsmoke: urlgeni.us/amz...
Varathane Oil Based Polyurethane in Clear Satin: urlgeni.us/amz...
3M Accuspray Gun:urlgeni.us/amz...
¼” Swivel Plug Female: urlgeni.us/amz...
Thread Seal Tape/Plumbers Tape:urlgeni.us/amz...
30 Gallon Husky Air compressor
3/8” 100ft Husky Air Hose: www.homedepot....
2” Painters Tape:urlgeni.us/amz...
Butch Paper to cover for spraying:urlgeni.us/amz...
Kilz Gray Primer Water Based: www.homedepot....
Behr Chalk Paint: www.homedepot....
800 Grit Sanding Sponge:amzn.to/3I1O4bL
Varathane Water Based Polyurethane in Crystal Clear Satin: urlgeni.us/amz...
Rustoleum Hammered Antique Pewter: urlgeni.us/amz...
Annie Sloan Black Wax: www.anniesloan...
Nail-On Furniture Glide: urlgeni.us/amz...
If you would like to help support my business feel free to check out my Amazon Wish List! www.amazon.com...
OR Buy Me A Coffee buymeacoffee.c...
Follow me:
/ sabsrehabs
/ sabsrehabs
/ sabsrehabs
/ @sabsrehabs
As a professional painter for 25 years you did a great job. Fantastic teacher…Keep up the good work!
Thank you so much!
I absolutely love this color and the more simple lines,,,,still like the rounded front
Very elegant pieces! Thank you for
detailed instructions on spray-painting.
You are so welcome!
these nightstands sure look beautiful after you got done with them. I sent this link to my daughter-in-law in Charlotte NC, she is starting with flipping and wants to get started with a paint gun. This video will be more than helpful to her. Thanks for your great explonation.
Thank you!
Hello Sabrina. So very well done. It turned out beautiful. You are so talented, especially with your woodworking skills.👍🥰🥰🥰
Thank you ☺️
Another AWESOME job! I enjoyed you explaining how to spray with the gun. You are a true artist!
Thank you!
Thanks for the great video on the spray gun for furniture paint. most video on it is for auto paint. This have been really helpful.
Good! I noticed all the videos on YT were to spray cars. Starting out and trying to learn how to use this gun for furniture was so stressfull for me because there wasn't much help out there. I am glad my video can help others. ☺️
Great lesson on the paint gun! I have been thinking about investing in one, so I am thrilled that you shared this! I have saved this video to have it when I am ready to take that leap! Thank you! Beautiful job, btw!
Thank you!
Tracey you took the words right out of my mouth 😉
Thanks so much for going over the sprayer.
Love this video. And I cracked up when you said to release the water from the air compressor.. it reminded me of Sybil movie... lol 😂 idk but thanks for the lesson and the laugh
Glad you enjoyed it!
Getting rid of those bulky appliqués was smart.
I love this video so much! Thanks for educating me on this spray gun!
Excellent Job. Actually it does. I’m going to repeat this video tomorrow. I’m embarrassed to admit that I’ve purchased a paint tent and gun but lack the confidence to use them, hence the repeat. Thanks
I think that is typical. I actually had my gun and compressor for 6 months before I even got the nerve to try. My first few attempts left me frustrated and in tears. I created this video in hopes to help someone else not have to go through that. ❤️
Bear Hugs from a 68 yr old Grammy from Kirby, Texas, USA 🐼
Wow, Sab, not bad. Your popping off over on Mad's channel brought me over to watch you. I call 'em like I see me. Good video. No doubt about it. For anyone starting out, just a great explanation of how to. Great clear video work.
Personally, I don't like that gel stain look. And I don't like waiting a day for oil to dry--and it's not really a day, it's more like two days and if you wipe it with a white paper towel after even two days--you''ll still see stain on the paper towel. And I don't like having to use an oil-based topcoat out of a can. Way too expensive and anything out of a spray can is a significantly inferior product.
Tips:
1. Instead of gel stain, try diluting water-based paint. 50/50 paint to water and you can go as high as 70% water depending on how much see-through you want. Looks great. Dries in an hour. And you can use a water-based top-coat or wax, same as for the rest of the piece and at the same time as the rest of the piece. So much easier than having to go back and forth between water-based v oil-based products and timelines.
2. Hit your piece with another round or two of stripper, rather than pulling out the scraper and the sander for the remaining splotches. 10 minutes into the 15-minute wait, start rubbing it with the steel wool and you'll get 99.9% of the paint off very easily. It'll save you time, effort, sanding, scraping and gunked-up sandpaper.
3. Try the citrus stripper--yeah, not nearly as powerful and takes 30 minutes--but that 15-minute stuff is so toxic! Both to the skin and to the lungs. I won't touch it anymore. Working on furniture is supposed to be fun and toxic is no fun.
4. Spraying: Narrow that spray pattern by half or more. It'll only take you a couple more seconds to spray the piece and you'll have a lot more control and won't spray half the inside of the piece and you'll eliminate all that overspray around the sides and top. They have spray patterns that are literally an inch. Great for tight, deep ornamentation grooves and the strips between drawers.
5. Spraying the drawers. Have to say, I've never seen it done quite like that. I'd be very wary about touching my freshly painted drawers--one smudge and it's a nightmare. And painting drawers in the box?--really tough to get as good coverage down low and underneath ornamentation and edges. I'm not one for getting down on my knees and painting up. The best way to paint drawers is outside the base. Put a drawer on a round turntable that stands waist-high, so the drawer face hangs over, and hold a thin piece of wood behind the drawer face as you go to block overspray. Some people use cardboard, but make sure it's strong cardboard. You cut the thin wood you hold behind the face to an L shape so you can hold it behind the drawer's corners and hit the corners with no overspray. I have a couple of them, different sizes for different size drawers. It's those corners and edges where paint wears/chips off first. You want the best coverage on the corners and edges. Either that or wrap them. About the same.
Great video thanks🙂much love from The Netherlands , i,m a furniture painter also
Awesome! Thank you Lulu!
Hands down the absolute best video on using a spray gun on CZcams!!! This video is soooo much better than the one I paid for on Facebook for the 3m accuspray gun!!!! One question…what was your settings on the compressor? I’m going to make certain to let the 3m accuspray folks they need to watch your video…you put theirs to shame. THANK YOU!!!! I have renewed faith to try to use my accuspray gun tomorrow.
Thank you! I tried reaching out to 3M and they just blew me off. Lol. I have my air compressor set to 120 psi
@@SabsRehabs I tweeted 3M with a link to your video.
@@SabsRehabs They replied with Amazing & thanks for sharing
If I could give you more than one like I would. Thank you for sharing your knowledge. 💕👍🏽👍🏽👍🏽
It's beautiful
Sabrina you did an amazing teaching lesson on the 3M sprayer!!! I Love the cabinets that you sprayed also!!!❤️🌟❤️ They are Gorgeous!!! 🌹🌼🌹
Thanks so much!!
Andersonville, Tennessee here!
Thank you so much for this tutorial!
You're welcome!
Your tutorial was top notch. I have not used a spray gun but I now feel familiar enough with how it works to begin. Thanks so much for sharing your knowledge and experience. Your finished project looks great!
Thank you so much!
Great job on explaining the gun. I’d like to try and use a spray gun instead of a brush. It seems smoother that way and definitely faster. I watch your channel all the time, I love what you do. Great job on these night stands. I’m glad you removed those things off of the drawers, it made them look more up to date. Great job
Thank you so much! Once I started spraying my furniture I wondered why I hand painted for so long. Lol
@@SabsRehabs
Can you tell me what paint mask you use? Thanks
Thanks for the great tutorial on using a sprayer, it was very detailed and informative. I think the final flip results are beautiful and I’m particularly impressed with the hardware finish!
Thank you! ❤️
Thank you for the 3M lesson, I learn a lot from you!
Beautiful!!!
Thank you!!
So gorgeous and I really like watching you
Thanks!
Hi Sab, like your videos and learned a lot. My question is I already have a Wagner 2500 paint sprayer for paint and stain. I haven't used it yet. Have you ever tried one of these? If so, or know anything I should know. I cannot get an air compressor and such. Pls.let me know.🙏🎨🎨
I personally haven't but I know a few flippers who have and they liked the gun. Each gun has its pros and cons and all have a learning curve. It took me a couple guns to find the right one for me.
TY
First of all, GREAT JOB! ❤
I have a question that’s has nothing to do with spraying. (Of course!) How do you know if the wooden accents on the drawers can be removed? Can all be removed, I have some pieces with these accents on them that I hate, but I don’t know if I can remove them like you did on this project. It’s probably a common sense thing. 😂
Most of them are removable and even sometimes are plastic and not even wood. Only way to know for sure is to try removing them.
Why did you choose to use a stripper vs just sanding down to bare wood?
To sand down to bare wood on a finish that thick would be sanding with 80 grit, then 120, and then 220. So, I stripped to save time.
8 coat process am I missing something?
I don't think so
I think they need legs. They look a little squatty. I like the color.
I saved the legs in case they person who buys them wants them back on.