just for future reference, you can take a voltmeter and test the coils or use a 9v battery and perform what they call the "pop test" and place pos to pos/neg to neg from batt to each coil and just touch it together, don't hold it on there, if it makes the speaker jump out the coil is good, that technique is also used to test speaker polarity
Neither matters when the voice coils are reverse polarity. Looks as though the coils are in parallel while one of the coils is pushing the other is puling. that's why the wire is jumping.
You didn't have go thru all that drama, you can test speakers by hooking them up to a AA battery. Instead of the wires going to an amp, take that end of the wires to a battery. Hold the negative to the batterys negative and when you touch the positive wire to the battery's positive you should hear a scratching sound. If you don't hear nuttin they blown. Thats it, simple as that nothing eise needed, works every time. Thought everyone knew this, admit its ghetto as funk but it works. Learned it back in the day prowling cars. Try it out, youll see what I'm talking bout.
Actually, if you touch the wire and complete circuit of current, the speaker pushes the cone out, or pulls in, depending if you have pos to pos and neg to neg, but do it backwards and it does the opposite. The more you know....
Just pissed me clean tf off u blew those speaker's u dnt kno what u doin never hook up audio with straight juice u to use to doin the hood way that's crazy all u had to do was cut the power off hook it up the right way and test them u ginna blow them every time doin it like dat dude
So my question is, why would you test speakers with other wires still connected???? this is some of the dumbest shit I ever seen it could have simply been wired wrong or either only one of the speakers were blown and shorting the amp!!!🤦🏾♂️🤦🏾♂️🤦🏾♂️
I'm guessing those were the Skar SDR subwoofers. There known for not handling much watts. It says 600rms and can't handle any more than that. I used to have a 18" SDR for my room and that subwoofer ended up blowing. If you like a good subwoofer for the price the American Bass XFL is nice and the NVX VCW v3. There's also a new brand out called Slapz car audio and those subwoofers are very good for the price.
simple battery AAA, AA, C, D, 9V any one of those will do. it will tell you if you have the polarity connected the way it should be and it will let you know if the speaker is good or not.
No, obviously not touching them PERIOD,would have been the best coarse of action. My guy barely knows how to tie his laces. Practicing phase:2, he's perfected The Bunny Ears method.
Id unhook the wires jumping to other coils . They could still have plenty of life left in them just the polarity is making wires jump because its backwards
Props for trying… some people just don’t need to fuck with tools or electrical. Do some research, and hone in on your tool holding/using skills they’re just hand tools not even power tools don’t let them beat you up. I guarantee those mf work and u just threw away a couple hundred dollars 💀😭 literally BLACK is always To black (NEGATIVE) red , copper, white ALWAYS (positive).
Please, have someone else hook them up. You have no buisness touching any electronical appliance. Not sure if that runs in your family, but I think I'd have it checked out ASAP.😂
this is the main reason that i dont watch this type of installation, because its a backyard ghetto style. im not saying all back yards are junk, just me personally i dont trust it. i hooked up all my system from people that know what they are doing and just follow their lead on installation.
Terminals on the box already melted, my guys amp ground is smaller than the power, I'm sure there's so much more shit wrong we can't even see. Research before you do installs people, this is how shit burns down. Oh btw you went thru so much shit that a multimeter or even a 9v battery could've told you hours ago
They had them wired wrong. They were grounding themselves out. You should have tried 1 with just the 2 wires from the Amp and removed all the other wires.
Yoo bro you dont know what you doing. If getting a spark you connect wires usually means a positive and ground a touching. You connected the speakers in reverse polarity. So you cant get any sound.
All this waiting of time to just find out they blown why eles would someone put them out by the road lol duh but anyways they throw away a good prefab bix them monsters in that classic the business
Hope you see this before you trash them. Look like the positive of one coil was connected to the negative of the other and vice versa. Thats probably why it blew. One coil trying to go up wile the other trying to go down
So... if you wire subs in series, you hook positive to negative, you can Google "subs series wiring". It doubles down the ohm load, and if you wire in parralel, the ohm load doubles up. Ie; 4ohm x2 coils in series, run 8 ohms, but wired parralel, 2 ohm, hotter, harder load. Audibly, barely noticeable, but very powerful.
This shit is hilarious. Millie Vanillie have no idea how car electronics work.
bro has some cowboy boots on...
My man got them boots on like Mike Epps in that movie Three Strikes...🤣🤣🤣
If they fried ...You could've smelled them speakers
yea them thangs stink real bad when they fried
he still should be able to smell it
just for future reference, you can take a voltmeter and test the coils or use a 9v battery and perform what they call the "pop test" and place pos to pos/neg to neg from batt to each coil and just touch it together, don't hold it on there, if it makes the speaker jump out the coil is good, that technique is also used to test speaker polarity
Neither matters when the voice coils are reverse polarity. Looks as though the coils are in parallel while one of the coils is pushing the other is puling. that's why the wire is jumping.
Facts @@MurderousMindstate
A digital multi meter and just switch to the ohm reading so you can probe each coil. That'll tell you if they bad for the most part.
I agree 👍
Yup they are definitely hooked up wrong, BIG FACTS!!!
one mans skarbage is another mans treasure....
sorry, i had to say it..
You had them hooked up wrong my guy! That’s why the wires were jumping like that
They for sure was not fried. Jodie def had the wires backwards lmaoooo
😂😂😂 that’s what I said had black on red and just to the outside with thick ass copper to make it jump spark
Get one sundown x12 in spec box and it will washout those 2 15s.
You didn't have go thru all that drama, you can test speakers by hooking them up to a AA battery. Instead of the wires going to an amp, take that end of the wires to a battery. Hold the negative to the batterys negative and when you touch the positive wire to the battery's positive you should hear a scratching sound. If you don't hear nuttin they blown. Thats it, simple as that nothing eise needed, works every time. Thought everyone knew this, admit its ghetto as funk but it works. Learned it back in the day prowling cars. Try it out, youll see what I'm talking bout.
Actually, if you touch the wire and complete circuit of current, the speaker pushes the cone out, or pulls in, depending if you have pos to pos and neg to neg, but do it backwards and it does the opposite. The more you know....
This is a prime example of why people shouldn’t work on electronics because they think it’s easy. It’s not all just plus and minus, Techs get it..
Nothing is simple with sound equipment ever
But it is. Problem is he has his plusses minused.
That new chief keef album fire thx for putting me on my boy
Yall lucky that box didnt have 1 inch course thread screws😢
We watchn ya outta StL Mane! Starkville-Maben Stand Up☝🏾
Just pissed me clean tf off u blew those speaker's u dnt kno what u doin never hook up audio with straight juice u to use to doin the hood way that's crazy all u had to do was cut the power off hook it up the right way and test them u ginna blow them every time doin it like dat dude
Tell me, how are those wired? Whats the final load for that?
I was sitting here thinking why dude look familar ...Ole boy look dude off of destroying
Got that 3000 watt amp in that pink💪🏾💪🏾
That's box is straight fire wood
Man you can tell these boys as contry as it gets lol
So my question is, why would you test speakers with other wires still connected???? this is some of the dumbest shit I ever seen it could have simply been wired wrong or either only one of the speakers were blown and shorting the amp!!!🤦🏾♂️🤦🏾♂️🤦🏾♂️
What up bro salute 💪
That's what I be rocking with skar
I'm guessing those were the Skar SDR subwoofers. There known for not handling much watts. It says 600rms and can't handle any more than that. I used to have a 18" SDR for my room and that subwoofer ended up blowing. If you like a good subwoofer for the price the American Bass XFL is nice and the NVX VCW v3. There's also a new brand out called Slapz car audio and those subwoofers are very good for the price.
I wanna hear that pink one!
W vid man good work
You gotta put dem 15’s in the Monte Carlo mann😮💨
Ima get some for it
@@doinkslifestyle wire those subs properly man.
They are not dead
simple battery AAA, AA, C, D, 9V any one of those will do. it will tell you if you have the polarity connected the way it should be
and it will let you know if the speaker is good or not.
That audio pipe need to be swapped for atleast a skar jp or even pioneer brah asap
oh no grandma's Lamp Cord is used as speaker wire
😂😂😂😂😂😂😂 I said the same shir except it was grandmas vacuum
He had them on dirty power I had mine for like 4ys and they still going hard
Ohm reader would be the best option to test them out .
No, obviously not touching them PERIOD,would have been the best coarse of action. My guy barely knows how to tie his laces. Practicing phase:2, he's perfected The Bunny Ears method.
They just SDRs you get em new for like $80 a piece. Wouldn't put more than 600 rms to each one that's all they can handle. They cheap for a reason
Cali checking in
Take all the wires off them test them
Idk if it's worth it but I heard you can rebuild them
Lmaoooo 😂😂😂
Why he wanna give me free subwoofers?
Cause they're BLOWN!
What a boy!
Id unhook the wires jumping to other coils . They could still have plenty of life left in them just the polarity is making wires jump because its backwards
Backwards??
Props for trying… some people just don’t need to fuck with tools or electrical. Do some research, and hone in on your tool holding/using skills they’re just hand tools not even power tools don’t let them beat you up. I guarantee those mf work and u just threw away a couple hundred dollars 💀😭 literally BLACK is always To black (NEGATIVE) red , copper, white ALWAYS (positive).
First time watching u bro, no hate obvi but that whole damn box looked fked up I wld try and rewrire and see what they do. Cuz that wiring was FKED
Send them in warranty, well try too
I got a 65 in tv like that...they thought it was blowed out but just needed to press and hold the reset button!!!!!
This is just a user error moment and this is why skarbage has its name 😂
😂😂that little azz box
Thay make a rebuild kit for em
And nothing. Nothing happened. Thank you for that.
😂😂😂
That box still good bro
Yes
@@doinkslifestyleDonkys suck😢
My brother always giving me free stuff 😅
U should give me that box fr
Your lucky you didn't fry pinkys sound system doing that
I want 4 of dem in atuned box
Aye kinfolks you do know they sell a recone kit for them scar 15s. They'll be just like brand new.
For the cost of the recone you might as well buy a new set
Yea I’ll buy new set. Thanks tho
Please, have someone else hook them up. You have no buisness touching any electronical appliance. Not sure if that runs in your family, but I think I'd have it checked out ASAP.😂
All you had to do was get it recoiled. That speaker is far from done magnet is fine cone is fine replace the coil
If you put a amp bigger then 1500 watts its going to bñow quick im sure you have a bigger amp then 1500 watts
bro put negative on positive and positive on negative
Or you can just touch the speaker in the middle if it sounds like something rubbing against metal they are blown out
this is the main reason that i dont watch this type of installation, because its a backyard ghetto style. im not saying all back yards are junk, just me personally i dont trust it. i hooked up all my system from people that know what they are doing and just follow their lead on installation.
I'll take them for sure
Them one of skar entry level subs they should be like $80-100 each
Sounds about right they are Skar SDR should do great on a rp1200.1
Them sdrs probably smoked
You should have took the wires off the speakers then check each coil on the speakers. The wires could be bad. The wires were jumping. Just saying bro.
Ima try that too. Real quick they looked good but same time never Kno
Those subs look out of phase
Can I have that box? Can you donate it to me?
Terminals on the box already melted, my guys amp ground is smaller than the power, I'm sure there's so much more shit wrong we can't even see. Research before you do installs people, this is how shit burns down.
Oh btw you went thru so much shit that a multimeter or even a 9v battery could've told you hours ago
They can be re-coned
If not everybody should be handling car audio was a video 💀
That’s funny 😂
Smh Really guys/bro clearly you can see it was hooked up WRONG LMAO 🤣 L7CKY U DIDN'T fry ur system..... Anyone else see the problem
I’m confused bro why even take them…
😂😂😂‼️
Because like 2 months ago I got some from him but they actually worked. They didn’t Kno what they was doing so I thought the same
@@doinkslifestylefacts I can’t fault u at that…U win some u lose some…Following & Subscribed to ur page all the way From MIAMI FLORIDA
They had them wired wrong. They were grounding themselves out. You should have tried 1 with just the 2 wires from the Amp and removed all the other wires.
Yoo bro you dont know what you doing. If getting a spark you connect wires usually means a positive and ground a touching. You connected the speakers in reverse polarity. So you cant get any sound.
Kickers my favorite speaker what yall bang with
Sundowns all day
Man I got American bass. But is sundowns good I heard too? Just don’t Kno what kind
DD all day!!!
Avatar all day
Dd audio
Might can get em rebuilt hit up skar they might do em for free
Bruh thats not even speaker wire but even then nobody giving away 2 15s for free that actually work.
Some people do got heart and give away stuff that do work I have do it before
U jumped them wrong to lower the ohms
I would have bought them blown subs
All this waiting of time to just find out they blown why eles would someone put them out by the road lol duh but anyways they throw away a good prefab bix them monsters in that classic the business
My guy let me do it you do not connect the negative with the positive Black wires are negative the other one is positive
Pinky clean
Jus rebuild da 15s
Why rebuild SDR 15s
Ima buy some
Just run it two way instead of 4
The speakers are wired wrong I'm serious
Those fuckers are good the wires where wrong on them try it with the wires off
Yea I kelp them and sold them
i need a box, if you’re willing to sell it😅
$65
@@doinkslifestyle bet! where you located? i’m in alabama
Ms,
Brandon
@@doinkslifestyle could you see about shipping it?
Hope you see this before you trash them. Look like the positive of one coil was connected to the negative of the other and vice versa. Thats probably why it blew. One coil trying to go up wile the other trying to go down
In fact subs might still be good... just wire them right lol. I'm screaming "hook it up to one coil!!!" When you took the wires off
So... if you wire subs in series, you hook positive to negative, you can Google "subs series wiring". It doubles down the ohm load, and if you wire in parralel, the ohm load doubles up. Ie; 4ohm x2 coils in series, run 8 ohms, but wired parralel, 2 ohm, hotter, harder load. Audibly, barely noticeable, but very powerful.
@keithhaynes5348 my bad I see it's wired correct. I didn't see where the wires cross. Try 1 coil by itself
Sorry dude! You don’t no what your doing! lol!
Those speakers aren't fried... yall didn't have them wired right!!!!! You just lost out on some good speakers smh 🤦🏿♂️
even if they were dead you could have fixed them
I kelp them when I realized . And sold them .
86k views 1k likes..... I'm not one of the likes.
Next time check it with a 9 volt battery, If its good it will pop each time you touch positive
Recone them joins
Can I have the box g
They fried them voice coils in them speakers
How much you want for that box
$65
@@doinkslifestyle ok cool I been looking for one
What is you talkin bout?!? 🤦🏾 Rewire and try again man yall have me stressed
OH YEA THEY DUNN
Even if they did work, you did a lot wrong in this video
No sound 😢
Wat u mean no sound ?
Their is sound he trippin @@doinkslifestyle
That box still good bro
@@kennymorris7650 true ima do some with it might see if I fit my Mc
This video was really lame cuz
Amateur hour🫣