PROGRAMMING MOTORS
Vložit
- čas přidán 11. 11. 2016
- www.motorgaragedoor.com, leading company in the field of sale and advice of automatisms explains the procedure to make travel programming, record control, activate the automatic closing and other motor sliding, swing, overhead or sectional.
- Věda a technologie
Hi, thank you for the explanation.
How i can sync with car's homelink ?
Thanks for the video. I have one that remains open until the remote is pressed again. How can I make it close on automatically. Thanks.
Thanks bro for this video, as I installed the same 3 years ago but lately I had sensors problem which don't make the gate stop or reverse when passing through while closing and make a big hit after that when reaching to the end
Can you help in this please
Very useful
Thanks i have a question i have installed the AC8R DL 942M. I set the time to automatic closer after 1 minute. But some time i want to just keep the gate open for few minutes without closing automatically. Can i do it by remote without just reaching the motor physically.
Hello, my motor was previously automated and working fine but not anymore. When I try to program as per your instruction, it closes the gate but doesn’t open and close as it should to fully program. With The remote too it only closes but doesn’t open. Will it work if I reset the motor completely? How do I do this?
Thanks bro, but the gate stopping sensors are not working properly, you can say not responding when somebody passes through while closing, as it detects the move and wants to stop but then continues closing, is there anything to fix this proplem
I have life acer 800. I have set it to automatic after 120 c. But i want also to stop the closing by pressing the remote without, re auto closing after 120c. I want to just keep it open for 15 minutes for example how can i do it ? Thanks
Sir we are using one life auto door system it is working clock wise only anti clock wise not working plz suggest to me
Dear sir ,
We have some motor but dont have limit switch , how to close limit and open command by programming
Could you advise me what happened? Suddenly the light stopped working, the light bulb stopped working (but the other lights are on) and the engine doesn't work. It doesn't respond to the remote control or the start button.
What should I do? Should I do a hard reset? How can I do it? thank you
Very good
I have same system but my door not open fully just open in half condition
All settings ok sir sensor not workings model is Ac12R DL please reply sir
Hi boss. I work same motor but i have a problem. The problem Gate go to Ahmed but do not return behind. How can i solve this? Please give me information.
how i reset the unit?
Hi my friend
How make blinking with sound
The green bottom for what?
А скажите пожалуйста где можно приобрести пульт
How to make slowdown
How to cancel the sensors
hi i was using the motor for swinging door for 2 years but now it stopped working, i follow every programing steps but there no any movement and it flashes the two red lights below can you tel me what the problem could be and also please can you tell me how to reset
Hi, send us an e-mail and we can speak in a better way and easier.
motoresgaraje@hotmail.es
Thanks
How i connect with my car control i have luxes and gmc car ?
with outside receiver
MotoresGaraje you mean i need extra receiver add in this system ?
Yes
Great video but didn't fix my issue. I have this motor since 2013 and last night it stopped working. Upon pressing the button on either the handheld controller or the main one I hear clicking and the motor try to move but no movement occurs. Its seems to try to push in one direction (2Sec) and then in the other direction (2Sec). It feels like a force issue so I removed the motor from the housing to check if it was a gear box issue. With the motor out of the housing it would run 25% of the time but not every time. could this be an issue with the force sensor or capacitor?
It will be the capacitor or force sensor (it sems the first option)
Yes the capacitor it was. Now I have to reprogram it all...Thank you
sorry have been away and never managed to finish. As the motor dealer is no longer in business I replaced the capacitor with an off the shelf one (which i was assured would work 20µF +5% 450Vac DB C 25/85/21 SH Po 50/60Hz) when reprogramming the motor i have the clicking + flashing leds but when I hit start again (should start the gate in motion) nothing happens, no movement just continued clicking. is this likely to be due to capacitor ?
Please give me the photovoltaic cell connection diagram
If someone already make automatic closing then how i will remove automatic closing
Hello, you have to desconect the power supply.
Then put again the power suply and press the yelow button. With + or - you can change the closing time (without any light don't have automatic close)
Regards
Tnx sir can u tell me please which one is common lort in wiring
Hai sir photo cells conection and push buten conection send
Please tell me how added GSM master
Hai sencer connection send
All settings and dynamo is good. But it's not working
It´s dificult know about it only writing without the engine to test it but all that I can say you is: "check the fuse inside the control panel".
Regards
Hello sir I am Naveen Pakistan I am installing home life as a machine door opener and door closer with all my effort I cannot handle with this problem our photo cell is not working please help us.
Rabta karo hamara sath