Is The GAN 251 M Pro BETTER THAN The Leap!? - Why CHEAPER IS BETTER!
Vložit
- čas přidán 24. 06. 2024
- Thank you everyone for 4,000 Subscribers! :)
In today's video, we're gonna be taking a look at the cheaper, yet superior version of the GAN 251 M Leap: the GAN 251 M Pro. This cube is incredible, and overall, I really enjoy it. But how does it compare to other 2x2s on the market, such as my main: the Cosmic MGC Elite 2x2. Watch this video to find out!
Thanks a lot to SpeedCubeShop for constantly supporting my channel and sending over this cube for me to test out! You can get it here (use code ram): speedcubeshop.com/products/ga...
Other 2x2s mentioned:
Cosmic MGC Elite 2x2: speedcubeshop.com/products/co...
YJ MGC Elite 2x2: speedcubeshop.com/collections...
GAN 251 M Leap (UV): speedcubeshop.com/products/ga...
GAN 251 M Air: speedcubeshop.com/products/ga...
Qiyi MS 2x2: speedcubeshop.com/collections...
Videos Referenced:
Why the Qiyi MS 2x2 is the BEST Budget 2x2 - • Why the Qiyi MS 2x2 is...
Cosmic MGC Elite + GAN 251 M Leap: Unboxing and Review - • UV Coated GAN 251 M Le...
Sponsored by SpeedCubeShop! Make sure to use the discount code RAM while checking out at sCs for 5% off your entire order, as well as a shoutout at the end of my latest video! Also, check out their socials here:
Website: speedcubeshop.com
CZcams Channel: / @speedcubeshopofficial
Instagram: / speedcubeshopofficial
Discord Server: / discord
Reddit Community: / speedcubeshop
Follow me on Instagram here (@theramthakkar): / theramthakkar
Subscribe to my 2nd Channel here (RamSolves): / ramsolves
MUSIC USED (in order):
1) Zelda and Chill - Dark World: • Zelda & Chill - Dark W...
2) chill. by sakura Hz / sakurahertz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/chill-sakuraHz
Music promoted by Audio Library • Chill - sakura Hz (No ...
The Kit I use to make my videos (no affiliate links): kit.co/ram_thakkar/youtube-kit
TIMESTAMPS:
0:00 - Thank you everyone for 4,000 Subs!
0:12 - Unboxing!
2:53 - Review After A Week!
5:27 - My Overall 2x2 Hardware Recommendations!
6:27 - Outro
Thanks a lot for watching, I hope you guys enjoyed it! Please like and subscribe if you enjoy my content, see you in the next video!
I have to say, this video is so well made!! I like how you weren't biased towards the Leap just because it is the most expensive 2x2 out there. Well done bro!! Well scripted, great editing, everything is just spot on!! 🔥🔥
Thank you so much Charged! So glad you enjoyed :)
Congrats on 4K and great video as always!!
Yeah he uploads 4k vedios
Lol
Thank you Kewbix!! :)
Yeop
@@RamThakkar i am having problems with my rs3 m 2020 the cube is not able to corner cut after 3 months i cant even Little bit corner cut and when i apply some pressure it pops out and some times while solving cube the centre piece and screw pop out after 100 or less solves and i searched in internet they recommend to use lube if cube is not able to corner cut but i don't have enought money and my parents dont allow me pls tell me solutions pls read this on and btw i love your vids❤️
You are so underrated, yet the video quality is so great I would think you are absolutely professional. Great job, Ram!
congratulations &
great video always❤️
Thanks man!! :)
congrats on 4k!!. also i love that you have unbiased opinions on cubes. you dont just reccomend your favourite cube. you give the best option for everyone!
Thanks so much! I'm so glad you enjoyed :)
congrats on 4k and awesome video
Thank you so much!!
Congratulations on 4k !!!!
You deserve WAY more
Thank you so much!!!
Such a great video bro! I knew that the pro was better than the leap!!! Congo on 4k and 5k will be coming suppperrrr soon!
Thanks Elyas!! Yes it’s so much better. I appreciate the kind words :)
Hey ram, another great video.... as always👍
And also congrats on 4k.....
Thanks!!
Congratulation Ram on 4K subscribers!!
Enjoyed the video as always!!
Waiting for ur opinions on WRs 2x2 (as i got them recently)
Thanks man! WRS vid tomorrow :)
Congratulations for 4.01 k subscribers 🥳🥳 and nice video 😄
Thank you :))
Congrats 👏🎉
Great video as usual!!!
Thank you!! :)
@@RamThakkar And also all ur 2x2 videos i luv it how the way u film it i downloaded all ur 2x2 video when my net finished i will be watching ur 2x2 videos only
Nice vid!!!
Also, congrats on hitting 4k subs!
Thanks man!!
congrats on 4k and great vid
Thank you!
nice video!
This is the simplest thumbnail of yours so far. Looks really good! Amazing video and congos on 4k!
Thanks guys! Appreciate the kind words :)
Congrats on 4k subs!!
Thanks!
massive congratulations on hitting 4k subs
Thanks man!
congrats ok 4k ram!!! seems like a great 2x2, glad you like it :)
Thanks Nds!! I really do :)
congo bro for 4k i hope u will soon reach10k subs
Haha thanks so much I really appreciate that!
I'm thinking of getting a Qiyi MS 2x2. Great points! Congratulations on 4000 subs!
Go for it!! Thank you :))
My thoughts have crystallised on the MS 2×2 as well...
I'll get it soon !!!
Also, I am finally getting the MS Pyra too 🙂
Great video!
Thanks!
@@RamThakkar Your welcome:)
4K!!!
my man is going up!!!
keep it up bro!!!!!!
Thank you so much man!
Yeah I also prefer heavier 2x2's, as for the event you want to have a lot of control over your turns as one lockup/overturn can ruin everything. Great video!
Also 5:55 🥳
LOL yes makes sense. Thanks JJ! The MS is great :P
Congratulations Ram For 4K Subs ♥️
Thank you so much!!
Hi. Can you suggest an ortega pdf as I have searched but did not find one. Thank you. Great video as always and congrats on 4k subs! Cant wait for 10k!
Thanks! Just watch any ortega tutorial video tbh, the algs are all standard and the same pretty much.
Congrats on 4k
Thanks!!
Congratulations 🎉
Thanks!!
Ur videos are so good your my favorite cubeing youtuber
Thank you so much :)
the thumbnail is simple yet effective
Hah glad you liked it!
hi bro, congratulations on 4k bro, btw when is the giveaway?
and will you make a video about budget timers?
Thanks! Giveaway at 5K subs probably. I don’t think I need to make a video on that since the Qiyi is probably the best budget timer.
@@RamThakkar Hi once again bro, I am also looking for a 2x2 which is like a one time purchase, which can perform fast when I need to, and slow when I need to. thank you
@@divagarans5846 you can get RS2M EVOLUTION
nice vid
hey ram, i have a suggestion for an video:
as youve already made an cll video can u please do anti-cll and eg-1 maybe sometime in future
i think this would help a lot of people including me
hope u do this
Thanks for the idea! Will probably do it eventually.
CONGRATULATIONS 👏. You use go pro to record your videos???
Thanks! I use my phone (iPhone 11 Pro Max) for normal vids and a GoPro Hero 10 for solves.
That's smart
Nice
You should make a Ram cube...
i am having problems with my rs3 m 2020 the cube is not able to corner cut after 3 months i cant even Little bit corner cut and when i apply some pressure it pops out and some times while solving cube the centre piece and screw pop out after 100 or less solves and i searched in internet they recommend to use lube if cube is not able to corner cut but i don't have enought money and my parents dont allow me pls tell me solutions pls read this on and btw i love your vids❤️
I feel like when you have any cube with strong magnets, you get the weak magnet version, but then you put it on strong magnets
yoo ram i am also going to phoenix cube challenges hope to meet you
See you there!
ram could you release the wrs 2x2 video as soon as possible because I have a comp coming up next month and my mgc 2x2 broke (it was when I just started cubing and I was a total idiot back then and bought it from amazon🤦♂)
Vid tomorrow
@@RamThakkar great
Hi ram great video
But i wiould like to watch u continue lets race series on all wca puzzles i completed watching all of ur lets race video
It will be greqt if you start it again
Thanks! I might do more Let's Race vids soon
I got a sneak peak on discord hehe but Congrats on 4k and pog video :D
Also pin :)
Thanks man! :)
Ram do u like UV coated cube or a Frosted coated on a bigger cube
Definitely glossy on big cubes. There’s no UV Coated Big Cubes on the market now sadly
Niceeee
Which instrument do you play
I don't play an instrument but my sister plays the violin :)
Wooow
What's your pb on 2x2?
Mine is 0.51:)
Nice! I have 0.32
If you like the 251 M Pro better because of the weaker core magnets, but you like the UV coating of the 251 M Leap, can you just swap the pieces? Take the UV coated pieces off the Leap core and put them on the Pro core? Then you'd have the weaker core magnets and UV coated pieces, both on the same cube.
Haha that’s actually exactly what I did 2 months ago. Video soon 👀
@@RamThakkar Looking forward to that video.
Hey ram i average 58 sec with a 1 dollar cube and its really frustrating as my cube just breaks after a couple of solves and its really slow i think i have better potential than that . I asked my parents to buy me the 9 dollar rs3m but they denied they think its a wate of money can you please tell me what to do now. Btw nice video
go for cheaper options like yuxin little magic or really any other budget speedcube. Show your parents your potential and interest in rubik's cube. They might get convinced because of that
@@yashhejib2851 but bro rs3m 2020 is just 8 dollars and it has way more features and adjustment options. And even if i tell my parents to buy me a 4 or 5 dollar cube they will just reply " does money grows on trees "
@@DevSwappy get cubelelo drift if you can't get a 4 dollar cube
@@DevSwappy Take them to a comp and make them try cubes. It should solve ur problem
I agree with I AM art. Maybe save up your own money to buy cubes?
The pro is so much better than the leap but for world class solvers it wouldn't be good because of the corner cutting problem.
I think it will be amazing for someone who averages over 2.5 seconds.
I agree with you. It can work for specific top solvers too though, like Will Callan uses it now!
@@RamThakkar Yeah but he uses the angstorm version and it doesn't seem like it went too well for him with this cube in his last comp.
Hi bro I didnt receive any reply when I message
Not anymore
Messaged where?